Sobre nosotros Moluosen Technology Limited
Premium Blockboard & Plywood for Interior Applications
Moluosen Technology Limited is a decoration and furniture wood-panel brand backed by WANG 大王椰, an established Chinese brand in wood-based panels and home-decoration materials with more than 3,000 physical stores nationwide. Drawing on this manufacturing expertise and market experience, Moluosen supplies professional wood-panel solutions to international customers.
PRODUCTS & APPLICATIONS
Moluosen specializes in manufacturing and supplying premium blockboard and plywood for indoor, non-structural applications. Core products include Chinese Fir-core blockboard, Eucalyptus-core blockboard and Eucalyptus plywood, available in different thicknesses, dimensions and surface finishes, including melamine-faced and natural-veneer options.
Applications include interior doors, full-height wardrobe doors, kitchen cabinets, wardrobes, closets, bathroom vanities, bespoke furniture, wall panels and high-end interior joinery. Panel specifications and finishes can be tailored to customer and project requirements.
MATERIALS & PERFORMANCE
Our premium product range uses selected virgin Eucalyptus and Chinese Fir (Cunninghamia lanceolata), without recycled or inferior wood. Controlled kiln-drying helps achieve consistent moisture content, improve dimensional stability and reduce the risk of warping, cracking, swelling and deformation during normal indoor use.
Moluosen's Dual-T Anti-Warp & Crack Control Technology is designed to improve dimensional stability and surface integrity, particularly for large doors, cabinetry and furniture. It can support full-height wardrobe doors up to 2,800 mm, subject to panel construction, design and application requirements.
Premium panels can achieve formaldehyde emissions of ≤0.025 mg/m³, supporting interior projects that require low-emission wood materials.
MANUFACTURING & QUALITY MANAGEMENT
Manufacturing is supported by a 100,000 m² production facility in Guangxi, China, with automated production systems and quality control across key processes: timber selection, kiln-drying, core preparation, panel assembly, hot pressing, finishing and final inspection.
Management and product systems are supported by certifications including FSC, CFCC, China Green Product, ISO 9001, ISO 14001 and ISO 45001. Products can be developed and supplied to address applicable technical, environmental and market requirements in different countries and regions.
INTERNATIONAL BUSINESS
Moluosen serves customers across Europe, North America, the Middle East and Asia-Pacific. While WANG 大王椰 focuses on China's domestic market, Moluosen brings the group's wood-panel expertise and manufacturing foundation to international markets through application-focused blockboard and plywood solutions.
SISTER BRAND: CYCLEPLYWOOD
Moluosen and CYCLEPLYWOOD are two independent brands under WANG 大王椰 Group, each serving distinct market segments.
Moluosen specializes in decorative and furniture-grade wood-based panels, serving the interior decoration and furniture industries. CYCLEPLYWOOD focuses on construction formwork plywood and film-faced plywood for concrete construction.
Both brands benefit from the Group's extensive wood-material expertise, manufacturing capabilities and established quality management system.
OUR COMMITMENT
From selected virgin timber to precision manufacturing, Moluosen is committed to consistent quality, reliable performance and wood-panel solutions suited to professional interior projects worldwide.
Perfection From Log to Detail.
Nuestros productos
Ver todos los productos → →
Eucalyptus Multiplex Plywood Panel (LVL)
Modelo: MLS004
Parámetros: Formaldehyde Emission Grade:
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
Panel Size: 4′X8′(1220mm*2440mm); 4′X9′(1220mm*2745mm); 4′X10′(1220mm*3050mm)
Panel Thickness:
0.63″, 0.71″, 0.87″, 0.99″, 1.57″, 1.97″
5mm, 9mm, 15mm, 16mm, 18mm, 19mm, 22mm, 25mm, 40mm, 50mm
Core Material: fresh eucalyptus veneer, finger joint construction
Face & Back (Each Side):
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET;
Option 5: HPL
Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
Water Resistance:
Boiling Water Proof (BWP);
Boiling Water Resistant (BWR)
Moisture Resistant (MR)
Intended Use: Interior, Non-Structural Use Only. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Premium Film-Faced Formwork Plywood
Modelo: CWL004
Parámetros: Panel sizes: 915×1830 mm; 1220×2440 mm
Thickness range: 12mm; 14mm; 18 mm
Core material: Fresh all-eucalyptus veneer construction; finger joint premium veneer selection
Adhesive/Glue: Water-resistant urea-formaldehyde (UF) resin
Face coating: melamine film with a paper weight of 75 g/m²
Face & back veneer: eucalyptus veneer
Reuse performance: 15–16 cycles
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Standard Film-Faced Formwork Plywood
Modelo: CWL003
Parámetros: Panel sizes: 915×1830 mm; 1220×2440 mm
Thickness range: 12mm; 14mm; 18 mm
Core material: Fresh pine + eucalyptus veneers; finger joint mixed species construction
Adhesive/Glue: Water-resistant urea-formaldehyde (UF) resin
Face coating: melamine film with a paper weight of 60 g/m²
Face & back veneer: 0.80 mm thick full-piece pine veneer for 14mm 18mm thick panel
0.40 mm thick full-piece pine veneer for 12mm thick panel
Reuse performance: 9–10 cycles
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Red Premium Formwork Plywood
Modelo: CWL002
Parámetros: Panel sizes: 915×1830 mm; 1220×2440 mm
Thickness range: 12mm; 14mm; 18 mm
Core material: Selected fresh all-eucalyptus veneer construction, finger joint premium veneer selection
Adhesive/Glue: Water-resistant urea-formaldehyde (UF) resin
Face coating: Phenolic resin
Face & back veneer: eucalyptus veneer
Reuse performance: 9–10 cycles
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Red StanadardFormwork Plywood
Modelo: CWL001
Parámetros: Panel sizes: 915×1830 mm; 1220×2440 mm
Thickness range: 12mm; 14mm; 18 mm
Core material: Fresh pine veneer + eucalyptus veneer; finger joint mixed species construction
Adhesive/Glue: Water-resistant urea-formaldehyde (UF) resin
Face coating: Phenolic resin
Face & back veneer: 0.80 mm thick full-piece pine veneer for 14mm 18mm thick panel
0.40 mm thick full-piece pine veneer for 12mm thick panel
Reuse performance: 5–6 cycles
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Eucalyptus Core Blockboard (Joinery Board)
Modelo: MLS002
Parámetros: Formaldehyde Emission Grade:
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
Panel Size: 4′X8′(1220mm*2440mm); 4′X9′(1220mm*2745mm); 4′X10′(1220mm*3050mm)
Panel Thickness:
0.63″, 0.71″, 0.87″, 0.99″, 1.57″, 1.97″
16mm, 18mm, 22mm, 25mm, 40mm, 50mm
Core Material: Eucalyptus Strip
Face & Back (Each Side):
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET;
Option 5: HPL
Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
Water Resistance: Moisture Resistant (MR)
Intended Use: Interior, Non-Structural Use Only. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Chinese Fir Core Blockboard (Joinery Board)
Modelo: MLS001
Parámetros: Formaldehyde Emission Grade:
ENF Grade: ≤0.025 mg/m³ (≈0.0186 ppm)
Ultra Low Emission: ≤0.037 mg/m³ (≈0.030ppm)
E0 Grade: ≤0.050 mg/m³ (≈0.0400 ppm)
Panel Size: 4′X8′(1220mm*2440mm); 4′X9′(1220mm*2745mm)
Panel Thickness:
0.63″, 0.71″, 0.87″, 0.99″, 1.57″, 1.97″, 2.36″
16mm, 18mm, 22mm, 25mm, 40mm, 50mm, 60mm
Core Material: Fresh Premium Chinese Fir Core (Cunninghamia lanceolata)
Face & Back (Each Side):
Option 1: Thermally Fused Melamine (TFL) ,over 300 colors
Option 2: 0.8mm, 1.2mm, 1.7mm, 3.8mm thickness HDF
Option 3: pine veneer, poplar veneer, okouma veneer, birch veneer
Option 4: PET;
Option 5: HPL
Adhesive/Glue: Melamine-urea-formaldehyde (MUF) resin
Water Resistance: Moisture Resistant (MR)
Intended Use: Interior, Non-Structural Use Only. For making high-end kitchen cabinets, bathroom vanities, wardrobes, closets, doors, wall panels, furniture, etc.
Certificates: ISO 9001:2015; ISO 14001:2015; ISO 45001:2018; FSC; PEFC_CFCC_CoC
Galería de la empresa
Certificaciones y premios
Casos de éxito
Furniture factory
client is very satisfied with the wood panel dimensional stability and reliable panel performance, no swelling, no cracking, no warping, very low formaldehyde emission. on time delivery, good package, proffessional service.
fast delivery time, good production capability to meet fast lead time, good package, wood panel has perfect dimensional stability and reliable performance, no swelling, no cracking, no warping, very low formaldehyde emission. fresh premium wood core materials and veneers. perfetct surface treatment
building material distributor
Client is very happy about the core material, Fresh pine and eucalyptus veneers; finger joint mixed-species core
client is very satisfied with the wood panel dimensional stability and reliable panel performance
on time delivery, good package, proffessional service. good production capability to meet fast lead time, good package, wood panel has perfect dimensional stability and reliable performance, fresh premium wood core materials and veneers. perfetct surface treatment
Decoration and design company
client is very satisfied with the wood panel dimensional stability and reliable panel performance, no swelling, no cracking, no warping, very low formaldehyde emission. on time delivery, good package, proffessional service.
fast delivery time, good production capability to meet fast lead time, good package, wood panel has perfect dimensional stability and reliable performance, no swelling, no cracking, no warping, very low formaldehyde emission. fresh premium wood core materials and veneers. perfetct surface treatment
Blockbaord OEM
client is very satisfied with the wood panel dimensional stability and reliable panel performance, no swelling, no cracking, no warping, very low formaldehyde emission. on time delivery, good package, proffessional service.
fast delivery time, good production capability to meet fast lead time, good package, wood panel has perfect dimensional stability and reliable performance, no swelling, no cracking, no warping, very low formaldehyde emission. fresh premium wood core materials and veneers. perfetct surface treatment
Videos de la empresa y productos
Introducción a la empresa y tour por la fábrica
⏱ Duration: 3:45 | 👁 Views: 15,230
Demostración del producto - Kestrel K-1
⏱ Duration: 5:12 | 👁 Views: 28,450
showcase de innovación tecnológica
⏱ Duration: 4:30 | 👁 Views: 12,890
Testimonios de clientes y casos de éxito
⏱ Duration: 6:20 | 👁 Views: 9,650
Contáctanos hoy mismo
Contáctenos ahora para saber cómo nuestros productos pueden satisfacer sus necesidades.