{{ variable.name }}
A compact V Type diaphragm compressor range for high-purity, high-pressure gas transfer and filling, with motor power from 2.2 kW to 30 kW.
The V Type diaphragm air compressor is a positive displacement compressor built for gas services where lubricant contact is not acceptable. The cylinder does not need lubrication, and the compression medium does not contact any lubricant, so the compressed gas remains free of oil contamination. The design supports gas purity up to 99.999%.
With 70-130 mm piston travel, 10-30 kN maximum piston force, 50 MPa maximum discharge pressure, 2-100 Nm3/h flow range and 2.2-30 kW motor power, this V Type range fits small to medium high-pressure gas transfer, cylinder filling, laboratory and pilot gas supply, and specialty gas handling.

V Type diaphragm air compressor. Image file suggestion: v-type-diaphragm-air-compressor-50mpa-front.jpg
| Model | V Type Diaphragm Air Compressor |
|---|---|
| Piston travel | 70-130 mm |
| Max. piston force | 10-30 kN |
| Max. discharge pressure | 50 MPa |
| Flow-rate range | 2-100 Nm3/h |
| Motor power | 2.2-30 kW |
| Lubrication in gas path | No cylinder lubrication; compressed medium does not contact lubricant |
| Compression purity | Up to 99.999% |
| Materials | Cast iron, cast steel, stainless steel, PTFE |
| Cooling | High-efficiency cooler; cylinder has good heat dissipation |
This variant covers the V Type diaphragm compressor family. Model selection is based on required discharge pressure, flow rate, gas type and motor power within the V Type range.
V Type50 MPa2-100 Nm3/h2.2-30 kWOil-freeFor gases such as H2, He, Ar, C2H4, F, HS, CL, SiH4 and NF, confirm material and sealing compatibility with the sales team before selection.
The compressor uses cast iron, cast steel, stainless steel and PTFE in its construction. The membrane head is sealed with inlaid double O-rings. The diaphragm adopts a special heat treatment method, and the new membrane cavity curve is designed to improve volumetric efficiency and optimize valve adjustment. A high-efficiency cooler supports low temperature and high efficiency of the whole machine.
The low rotation speed helps extend the service life of wearing parts. The diaphragm rupture alarm structure is advanced, reasonable and reliable, and the diaphragm is easy to replace.
The V Type range is suitable for chemical and petrochemical industries, electronics and semiconductor manufacturing, hydrogen energy and refueling stations, and specialty gases and industrial gases. It is especially suited to compression, transport and bottling of high-value rare gases and highly corrosive, toxic, explosive or radioactive gases.
Typical V Type duties include high-purity gas transfer, cylinder filling, laboratory and pilot gas supply, and specialty gas handling where oil-free compression is required.
Sollant supports OEM/ODM customization. For this V Type diaphragm compressor, material options include cast iron, cast steel, stainless steel and PTFE. Selection can be matched to the gas, discharge pressure, flow rate and motor power within the published V Type range. Please share the gas composition, required pressure, flow and site conditions for configuration review.
Yes. The cylinder does not need lubrication, and the compression medium does not contact any lubricant during compression.
The V Type range reaches a maximum discharge pressure of 50 MPa.
The flow-rate range is 2-100 Nm3/h, with motor power from 2.2 kW to 30 kW.
The compression purity can reach 99.999% because the gas path is oil-free.
It is used for gases such as H2, He, Ar, C2H4, F, HS, CL, SiH4 and NF, including high-value rare gases and corrosive, toxic, explosive or radioactive gases when properly configured.
Available materials include cast iron, cast steel, stainless steel and PTFE.
The diaphragm has no direction when installed and is easy to replace. The diaphragm rupture alarm structure supports reliable monitoring.
Main image: v-type-diaphragm-air-compressor-50mpa-front.jpg | Alt: V Type diaphragm air compressor front view with oil-free cylinder and high-pressure fittings.
