Two-stage compression
Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.
{{ variable.name }}
For automotive plants needing stable air for assembly lines and pneumatic tools, with dust and particle control and high cleanliness requirements in paint shops. This two-stage PM VSD unit serves large-scale continuous production; oil-free painting air is handled separately.

Automotive plants need stable air for assembly lines and pneumatic tools while controlling dust and particles. This two-stage PM VSD compressor is used in large-scale continuous production to reduce energy consumption and hold pressure. For paint shops requiring high cleanliness, the plant solution uses oil-free water-lubricated compressors; this unit serves assembly and utility air.
Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.
Two-stage PM VSD replaces single-stage compression and increases displacement by nearly 15%, adding up to 15% energy saving.
Two-stage PM VSD significantly reduces energy consumption on large-scale, continuous automotive production lines.
Compared with ordinary industrial frequency machines. At 8,000 h/year, the saving can reach about USD 30,000 per year.
The motor and male rotor use one shaft, eliminating coupling and gear transmission and reducing related failure risk.
No motor, bearing, gear or coupling noise; noise range for the series is 65–78 ±3 dB.
| Parameter | Specification |
|---|---|
| Model family | SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V, SLTT-250V |
| Working pressure | 8–13 bar |
| Capacity | 1.36–53.68 m³/min (series range) |
| Power range | 22–250 kW |
| Horsepower | 30–335 hp |
| Noise | 65–78 ±3 dB |
| Air outlet pipe diameter | DN40, DN50, DN65, DN100 |
| Net weight | 732–6000 kg (series range) |
| Compression | Two-stage compression |
| Drive | Permanent magnet variable frequency drive |
| Rotor profile | Patented UV profile, refined by more than 20 procedures |
| Materials | Cast iron, stainless steel |
The SLTT-V series covers 13 models from SLTT-22V to SLTT-250V, with 22–250 kW power, 8–13 bar working pressure and 1.36–53.68 m³/min capacity range. Final model selection depends on required air flow, pressure, duty cycle and site conditions.
The air end uses a patented UV rotor profile and two-stage compression structure. Cast iron and stainless steel are used in the construction. The PM VSD motor and male rotor adopt an integrated shaft structure, so there is no coupling or gear transmission. This compact arrangement reduces efficiency loss and mechanical failure points.
Low noise and low vibration are achieved by removing motor, bearing, gear and coupling noise sources. The integrated PM VSD structure also saves floor space, which matters in dense automotive assembly areas.
This two-stage PM VSD unit serves automotive manufacturing air demands where stable pressure and energy efficiency are priorities:
Sollant supports OEM/ODM customization. Project requirements can be discussed around the SLTT-V model, working pressure within 8–13 bar, air outlet size, and matched air receiver, refrigerated dryer or precision filter configuration. Sollant was founded in 2004 and operates a 30,000 ㎡ facility with 20,000 units annual output.
Automotive assembly lines need stable pressure for pneumatic tools and continuous production. Two-stage PM VSD reduces energy consumption on large-scale lines, increases displacement by nearly 15% and can save up to 40% versus ordinary industrial frequency machines.
Painting and coating lines require high cleanliness and oil-free air. The automotive plant solution uses oil-free water-lubricated screw compressors for those lines. This two-stage PM VSD unit serves assembly lines, pneumatic tools and utility air.
The automotive solution matches air receiver tanks, refrigerated dryers and precision filters (C/T/A grades) to remove moisture, oil and dust and deliver stable, clean air at the point of use.
The SLTT-V series includes SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V and SLTT-250V.
Sollant's related certification set includes CE for air compressors, CE for permanent magnet motors, EMC for the controller, PED verification for oil and air tanks, and ISO 14001 environmental management.
Yes. OEM/ODM support is available, and Sollant provides 24/7 engineering after-sales support and original spare parts through its international service team.
Send your required model, working pressure, capacity, site conditions and destination country to info@sollant.com. Tel or WhatsApp: +86 155-8905-3798. Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.
Discuss Your Automotive Project