menú

Road Sweeper Truck

en stock:
SKU: 1957170298
modelo: Road Sweeper Truck

{{ variable.name }}

{{ value.name }}

Product Specification

TypeRoad Sweeper Truck, Street Sweeper Truck, Vacuum Road Sweeper, Mechanical Broom Sweeper, Wet Dust-Suppression Sweeper, Sweeping and Washing Truck, 4x2 Road Sweeper, 6x4 Road Sweeper, Airport Runway Sweeper, Kerb and Gutter SweeperModelRoad Sweeper Truck
ParamsCONFIGURATION - Vehicle type: truck-mounted mechanical sweeper with vacuum suction, water-spray dust suppression and self-discharge - Drive configuration: 4x2 for city streets at 7,000-10,000 kg GVW; 6x4 for highways, airports and 16,000-25,000 kg GVW - GVW: 7,000-25,000 kg - Rated payload: 2,000-12,000 kg - Overall dimensions: length 5,950-10,500 mm, width 2,000-2,550 mm, height 2,380-3,300 mm - Wheelbase: 2,800-4,600 mm - Cab: 2-3 persons, day cab, left-hand or right-hand drive SWEEPING AND SUCTION SYSTEM - Sweeping layout: centre-mounted twin disc brushes, wide suction nozzle with built-in high-pressure spray bar, high-pressure side spray bar - Brush drive: hydraulic motor, rotation speed adjustable to the road condition - Sweeping width: 2.2-3.6 m, adjustable; single-side or dual-side operation - Kerb sweeping: retractable kerb brush on the left, right or both sides - Suction nozzle: floating nozzle with replaceable wear strips; maximum particle diameter 100-150 mm - Suction fan: centrifugal fan driven by the auxiliary engine or the hydraulic system - Sweeping efficiency: 95 percent or higher on a standard test surface - Air duct conversion: recirculation or direct suction mode for dry, wet or rainy-day operation - Dust suppression: high-pressure spray at the brushes and the nozzle; fog cannon optional WATER AND DEBRIS TANKS - Water tank: 1-10 m3, stainless steel 304 or carbon steel with anti-corrosion lining - Dust bin: 2-12 m3, rear-tipping or rear-door discharge - Tank layout: water tank and dust bin combined in one body, with level gauge and low-water alarm - Water pump: high-pressure piston or centrifugal pump, 8-15 MPa for washing - Filling: gravity fill or hydrant connection; drain valve at the lowest point - Options: separate washing boom, hand-held spray gun, drinking-water tank CHASSIS AND DRIVELINE - Engine: diesel, 85-250 kW (115-340 hp), Euro II to Euro V, matched to local fuel quality - Auxiliary engine: 57-100 kW (77-135 hp), dedicated to the fan and the hydraulic pump - Transmission: manual with 5-10 forward speeds; automated manual optional - Front axle: 1,800-7,500 kg capacity; rear axle: 3,500-16,000 kg - Suspension: leaf spring; air suspension optional on 6x4 - Brakes: air brake with ABS, spring parking brake - Steering: hydraulic power steering - Tires: 7.00R16 to 11.00R20, 6-10 tires plus one spare - Fuel tank: 100-300 L; electrical system 24 V PERFORMANCE - Working speed: 3-20 km/h - Transport speed: 90-100 km/h - Working area: 20,000-90,000 m2/h, depending on sweeping width and working speed - Gradeability: 20-30 percent - Water consumption: 0.03-0.10 L per m2 in light dust-suppression mode, adjustable at the spray valve - Bin discharge: 20-40 s per tipping cycle - Working temperature: minus 20 to plus 50 degrees C; tropical cooling or cold-start package available - Noise: below 82 dB(A) at 7 m in normal sweeping mode QUALITY AND DELIVERY - 100% pre-shipment check: brush rotation, suction performance, spray pressure, hydraulic pressure, bin tipping, brake and road test - Warranty: 12 months for major components; wear parts such as brushes, nozzle strips and seals excluded - Lead time: about 25-40 working days from down payment - Export documents: invoice, packing list, bill of lading, certificate of origin, insurance - Trade terms: FOB, CIF or DAP; RoRo or break-bulk, 1-4 units per shipment - Spare-parts kit: brush segments, nozzle wear strips, hydraulic hoses, filter elements, spray nozzles and lampsMaterialBody and tanks: Q235/Q345 carbon steel, shot-blasted, epoxy-primed and polyurethane top-coated; water tank and dust bin in stainless steel 304 for humid or corrosive service; dust bin floor and discharge door in 4-6 mm wear-resistant steel. Chassis frame and sub-frame: Q235/Q345 steel, 6-8 mm, bolted sub-frame. Brushes: polypropylene or nylon filament disc brushes with optional steel-wire tufts for heavy debris; replaceable brush segments. Suction nozzle: Q345 wear-resistant steel with replaceable rubber or polyurethane wear strips. Hydraulic system: hard chrome-plated cylinder rods, high-pressure rubber hoses with steel fittings, gear or piston pump. Seals and skirts: EPDM rubber for tank covers, doors and nozzle skirts. Cab: welded steel body, tempered glass, anti-corrosion primer.
Applicable IndustryMunicipal sanitation and street-cleaning departments. Highway and expressway maintenance depots. Airport runways, taxiways and aprons. Port terminals, container yards and logistics parks. Industrial plants: steel mills, cement plants, coal yards, power stations and chemical parks. Construction sites and concrete batching plants. Parks, squares, residential compounds and commercial plazas. Tourism areas, beaches and event venues. Food and beverage plants needing dust and spill control. Mining access roads and haul-road shoulders. Parking lots, toll stations and weighbridges. Disaster cleanup and post-flood silt removal. Equipment rental fleets and municipal service contractors. Campus, hospital and industrial-estate roads.

Feature

1. One supplier for the whole sweeper range. A single inquiry covers 4x2 city sweepers and 6x4 heavy units, water tanks from 1 to 10 m3, dust bins from 2 to 12 m3, mechanical broom and vacuum suction layouts, and sweeping-and-washing versions. A city fleet, a highway depot or a distributor works from one quotation and one spare-parts list. 2. Real numbers already published. The 4x2 unit on the company website runs at 7,360 kg GVW with a 2,190 kg payload, a 2.2 m sweeping width, a 1 m3 water tank, a 2 m3 dust bin, 45,000 m2/h working area and 95 percent sweeping efficiency. These are production figures, not catalogue estimates, and the same platform can be re-quoted with a larger tank or a second axle. 3. Dust control, not dust shifting. High-pressure spray bars at the brushes and at the suction nozzle wet the road before the brush touches it, and the sealed dust bin keeps the load inside. This is what stops the fine-dust complaint that follows a dry broom sweeper through a residential street. 4. Sweeping device matched to the street. Centre-mounted twin disc brushes, a wide floating nozzle and a retractable kerb brush on the left, right or both sides handle camber, gutters and kerbs; the hydraulic motor lets the operator slow the brushes on rough asphalt and speed them up on loose sand. 5. All-weather operation. An air-duct conversion device switches between recirculation and direct suction, so the same truck works in dry season, after rain and on wet leaves, instead of standing idle when the road is damp. 6. Chassis and tanks configured for the market. Diesel engines from 85 to 250 kW in Euro II to Euro V, left-hand or right-hand drive, stainless steel tanks where humidity or salt is a problem, tropical cooling or a cold-start package, so the truck suits the fuel, the climate and the traffic rules of the destination. 7. Low cost per swept kilometre. Hydraulic brush drive, a fuel-efficient auxiliary engine and replaceable brush segments and nozzle wear strips keep consumables cheap; the wear parts are standard items, so a fleet does not wait weeks for a proprietary assembly. 8. Export paperwork and shipping in one set. Invoice, packing list, bill of lading, certificate of origin and insurance are prepared together, and units ship by RoRo or break-bulk under FOB, CIF or DAP terms. 9. Support after delivery. A 12-month major-component warranty and a spare-parts kit with brush segments, nozzle strips, hydraulic hoses, filters and spray nozzles shorten downtime where a dealer is far away, backed by the 15-minute response and 24-hour hotline service pledge. 10. Advice before the order. Sales engineers ask what road is swept, what debris is typical, how many kilometres a day, whether water is available on site and where the bin is tipped, then fix tank volume, sweeping width, brush layout and axle configuration, so the truck is neither too small for the route nor too heavy for the road.

elorry-road-sweeper-truck

elorry-road-sweeper-truck


elorry-road-sweeper-truck

elorry-road-sweeper-truck


elorry-road-sweeper-truck

elorry-road-sweeper-truck


elorry-road-sweeper-truck

elorry-road-sweeper-truck


Road sweeper truck

Road sweeper truck


Road sweeper truck

Road sweeper truck


Road sweeper truck

Road sweeper truck


Road sweeper truck

Road sweeper truck


Road sweeper truck

Road sweeper truck