menú

Plateau Duty Screw Compressor Airend GCU11 with Altitude Intake Port

en stock:
SKU: 384693898X
modelo: GCU11

{{ variable.name }}

{{ value.name }}

Plateau Duty Screw Compressor Airend GCU11 with Altitude Intake Port

Altitude oxygen compensation intake | operation up to 5,000 m | -40 C to +50 C | oil carry-over at or below 3 ppm

5,000 m altitude operationOxygen compensation intakeDry air for O2 / N2 generationCE compliant supply

Product Summary

This GCU11 variant is configured for plateau rail and coach duty, where thin air and a large day to night temperature swing are the normal working condition. An altitude oxygen compensation intake port keeps delivery stable as ambient pressure drops, and the unit is designed for an ambient range of -40 C to +50 C. Oil carry-over is held at or below 3 ppm so the compressed air is clean and water-free enough to feed on-board oxygen and nitrogen generation through a dryer and precision filter. The base block keeps its 9-in-1 layout, 4-7.5 kW drive range, 0.6-1.0 m3/min delivery at 7 bar, 16/5 bar pressure limits and 55 kg net weight.

GCU11 plateau duty screw compressor airend with altitude compensation intake port
GCU11 plateau configuration with altitude oxygen compensation intake port.

Key Features

Altitude oxygen compensation intake

A dedicated compensation intake port supports normal operation at altitudes up to 5,000 m, where standard intake sizing would lose delivery.

-40 C to +50 C design range

The block is specified for the wide ambient swing of plateau routes, covering cold night starts and warm daytime running without a separate winter kit.

Dry air at or below 3 ppm

Two-stage separation with a built-in coarse separator and oversized external fine separator protects oxygen and nitrogen generator membranes and precision filters.

On-board 9-in-1 layout

Airend, separator tank, three filters and four valves sit in one 55 kg body of 378 x 350 x 415 mm, which suits underframe and coach equipment bays.

Rotor and bearing set

Forged alloy steel rotors with the German-designed UV patented profile run in SKF heavy-duty rolling bearings behind a triple-sealing shaft seal.

Pressure-ready to 16 bar

Working pressure spans 5 to 16 bar. For 16 bar duty the external fine separator, oil filter and safety valve are specified at 20 bar rating or higher.

Technical Specifications

ModelGCU11 plateau configuration
Altitude capabilityUp to 5,000 m
Ambient design range-40 C to +50 C
Intake featureAltitude oxygen compensation intake port
Oil carry-overAt or below 3 ppm
Air quality for generatorsClean, water-free compressed air behind dryer and precision filter
Power4-7.5 kW
Speed2900-6500 rpm
Free air delivery at 7 bar0.6-1.0 m3/min
Working pressure, max / min16 / 5 bar
Max discharge temperature105 C
NoiseAt or below 75 dB(A)
Net weight55 kg
Dimensions (L x W x H)378 x 350 x 415 mm, excluding air filter assembly
Housing / rotorsHigh-grade cast iron housing, forged alloy steel rotors

Models and Options

The plateau configuration is ordered against the route profile: altitude band, ambient range and the air quality required by the downstream generator set. Power selection stays within 4-7.5 kW and speed within 2900-6500 rpm, so the delivery point can be matched to the oxygen or nitrogen output. Drop-in replacement dimensions are available for retrofit work, and the air filter remains an optional external item.

Where the package feeds an oxygen or nitrogen generator, confirm the dryer and precision filter arrangement during inquiry so the 3 ppm oil carry-over limit is maintained at the generator inlet.

Materials and Structure

The housing is high-grade cast iron with an aluminium-alloy version under development. Rotors are forged alloy steel, machined over more than 20 precision steps to the UV patented profile held under CNIPA patent ZL2012 1 0087353.0. SKF heavy-duty rolling bearings support the rotor shafts and a triple-sealing shaft seal closes the drive end. The compensation intake port is integrated into the intake side of the block, and the 9-in-1 arrangement carries the separator tank, three filter positions and four valves on the same casting.

GCU11 airend separator tank and valve arrangement for plateau rail installation
Separator tank and valve arrangement on the integrated GCU11 block.

Applications

  • Plateau locomotive and coach oxygen supply systems
  • On-board oxygen and nitrogen generation air supply
  • Rail vehicle air system retrofit and aftermarket replacement
  • High-altitude mining and engineering vehicle air systems
  • Special vehicles operating above 4,000 m

Customization

Plateau projects are configured around three inputs: maximum altitude, ambient temperature band and the air quality class required downstream. Drop-in replacement dimensions are available where an existing imported airend is being replaced, and documentation can be supplied for retrofit approval. Buyers can request the alarm and control interface that matches the vehicle or coach system during inquiry.

Case Study

A plateau locomotive and coach oxygen supply project has taken 300 units over two years. The units deliver clean, water-free compressed air for on-board oxygen and nitrogen generation and have run normally at altitudes up to 5,000 m with stable pressure and delivery. The configuration combines the altitude oxygen compensation intake port, a -40 C to +50 C design range and oil carry-over at or below 3 ppm.

A second contractor on the same programme has shipped approximately 300 units cumulatively for aftermarket replacement and vehicle air system retrofit. Supply is CE compliant, purchase cost runs 25 to 30 percent lower than comparable European airends of equivalent performance, and the drop-in replacement dimension shortened the retrofit window. Lead time was 4 to 5 weeks against 8 to 10 weeks for imported units.

FAQ

How does the airend behave at very high altitude?

The altitude oxygen compensation intake port is designed to maintain stable pressure and delivery at altitudes up to 5,000 m. This behaviour was confirmed in the plateau locomotive and coach oxygen supply project.

Is the air dry enough for oxygen generation?

Oil carry-over is at or below 3 ppm and the air is water-free when used with the specified dryer and precision filter, which is the arrangement applied in the on-board oxygen and nitrogen generation projects.

What ambient temperature range is covered?

The plateau configuration is designed for -40 C to +50 C, covering cold night starts and warm daytime running on high-altitude routes.

Can it replace an imported airend directly?

Yes where the mounting is specified for drop-in replacement. The retrofit project on this programme used drop-in replacement dimensions and reported a 4 to 5 week lead time against 8 to 10 weeks for imports.

What pressure and flow does the block cover?

The base GCU11 covers 0.6-1.0 m3/min at 7 bar across 4-7.5 kW and 2900-6500 rpm, with working pressure between 5 and 16 bar and a maximum discharge temperature of 105 C.

Which compliance documents are available?

CE certification CE-WSD-GCU-2023-001 from TUV Rheinland covers integrated screw airends and vehicle-mounted compressors from 2.2 to 45 kW. The company also holds ISO 9001:2015 certified by SGS, IATF 16949 and rail transit product certification.

Inquiry Information

Share the maximum altitude, ambient range and generator inlet requirement so the plateau configuration can be confirmed.

Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878

Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China

Image Filename and Alt Suggestions

gcu11-plateau-altitude-compensation-intake.png | Alt: GCU11 plateau duty screw compressor airend with altitude compensation intake port
gcu11-plateau-separator-tank-valves.png | Alt: GCU11 airend separator tank and valve arrangement for plateau rail installation
gcu11-plateau-onboard-installation.png | Alt: GCU11 airend positioned for on-board coach air supply