PGZ1000 Sealed Automatic Bottom Discharge Basket Centrifuge

Product Summary

The PGZ1000 is a vertical bottom discharge peeler centrifuge built by JGD Centrifuge for batch filtration and dewatering duty. A 1000 mm drum with 175 L volume accepts a maximum loading limit of 235 kg, running at 1000 rpm to a maximum separation factor of 560. The main motor is an 11 kW explosion-proof unit. Operation is fully automatic, the machine uses a flat plate damping structure that needs no foundation, and the process area is sealed for hygiene and explosion-proof safety. Wetted parts are available in stainless steel, duplex, titanium or Hastelloy-C alloy.

Key Features

• Fully automatic operationThe machine runs its cycle automatically, cutting manual handling and labour cost per batch.
• Flat plate damping, no foundationThe flat plate damping structure removes the need for a poured concrete foundation and keeps running smooth.
• Sealed and explosion-proofSealed execution plus an 11 kW explosion-proof main motor support safe processing of solvent-wet cakes.
• 1000 mm drum, 235 kg load175 L drum volume and 235 kg maximum loading give a defined batch size for production planning.
• Fr 560 dewatering force1000 rpm drum speed producing a maximum separation factor of 560 drives moisture down in the cake.
• Wide material rangeSS304 to Hastelloy-C alloy options let one platform serve mild, chloride-bearing and corrosive media.

Technical Specifications

Models and Options

PGZ1000 is the published size in this range, part of JGD's LGZ/PGZ series of fully automatic scraper bottom-discharge centrifuges. Drum diameter, drum volume, loading limit and motor rating beyond the values listed above are not published in the current specification, so they are quoted per project after the process data is reviewed.

Material of construction is selected from SS304, SS321, SS316L, SS2205, SS904L, titanium and Hastelloy-C alloy according to the corrosion profile of the product and wash liquid.

Materials and Structure

The PGZ1000 is a vertical-axis machine with a bottom discharge arrangement, so the separated cake leaves the basket from below the drum. A flat plate damping structure carries the rotating assembly and keeps vibration low without a separate foundation block, which simplifies installation in existing buildings and skid-mounted lines. The process zone is sealed, and the drive uses an 11 kW explosion-proof main motor.

Construction materials cover SS304, SS321, SS316L, SS2205, SS904L, titanium and Hastelloy-C alloy. Selection is matched to the chloride content, pH and temperature of the mother liquor rather than applied as a fixed standard.

Applications

The centrifuge is applied in fine chemical, pharmaceutical, API, food and metallurgical production, in intermediate materials for lithium batteries, and in environmental protection and resource recycling. In these duties it performs the filtration and dewatering step of a batch, discharging a drained cake for drying, washing or packing. Explosion-proof and sealed execution suits lines handling organic solvents; the higher-alloy material options suit corrosive mother liquors and salt-bearing streams.

Customization

JGD provides customization covering FDA, GMP and cGMP compliance requirements for equipment, aseptic CIP & SIP technology, on-site explosion-proof protection, concentration and pretreatment of materials, and automated and intelligent operation. Share the slurry solids, particle size, liquid phase and required residual moisture and the configuration is confirmed against your process.

FAQ

• What batch size can the PGZ1000 handle?

  The drum holds 175 L with a maximum loading limit of 235 kg per batch.

• What drum speed and separation factor are achieved?

  The drum runs at 1000 rpm, giving a maximum separation factor of 560.

• Does the machine need a concrete foundation?

  No. The flat plate damping structure is designed so no foundation is required, and it keeps operation smooth.

• Which materials are available for wetted parts?

  SS304, SS321, SS316L, SS2205, SS904L, titanium and Hastelloy-C alloy.

• Is the drive suitable for solvent-wet products?

  The main motor is an 11 kW explosion-proof unit and the machine is supplied in sealed execution, supporting explosion-proof safety on site.

• Can it be built for GMP-regulated production?

  JGD offers customization services in FDA, GMP and cGMP certification for equipment, together with aseptic CIP & SIP technology.

• What are the price, MOQ and lead time?

  Price, minimum order quantity and delivery time are not published for this model. Send your process data and required material grade for a quotation.

Inquiry Information

Image Filename and Alt Suggestions