{{ variable.name }}
Model LH0703C · folded 168 × 88 × 82 mm · suggested max. holding weight 150 g · one-piece hinged PET
PET Hinged Sandwich Wedge Container LH0703C 150 g Grab-and-Go
PET hinged sandwich wedge container LH0703C measures 168 × 88 × 82 mm and holds up to 150 g. One-piece lid and base for deli, café and grab-and-go service.
/pet-hinged-sandwich-wedge-container-lh0703c
The LH0703C is a one-piece hinged container built around the cut sandwich wedge. Folded size is 168 × 88 × 82 mm and the suggested maximum holding weight is 150 g, so the pack is aimed at single-serve sandwiches rather than general-purpose trays. Because the lid is joined to the base, staff open, fill and close the pack in one movement and never handle a loose lid at the counter.
The container is produced in PET, the material used across this hinged range for packs that need the food to stay readable through the walls. In a chilled grab-and-go cabinet the sandwich remains the visual focus, which supports shelf presentation in cafés, delis and supermarket food-to-go areas.
| Parameter | Detail |
|---|---|
| Model | LH0703C |
| Product type | Sandwich wedge hinged container |
| Folded dimensions | 168 × 88 × 82 mm |
| Suggested max. holding weight | 150 g |
| Material | PET |
| Structure | One-piece hinged, integrated lid and base |
| Closure | Hinged cover, no separate lid handling |
| Typical contents | Cut sandwich wedges and single-serve deli portions sized to the wedge footprint |
| Retail channels | Cafés, delis, convenience stores, supermarket grab-and-go |
| Sealing equipment | Hinged formats generally do not require dedicated sealing equipment for normal closure |
| Customisation | Custom sizes, colours and mould development can be evaluated |
LH0703C is the smallest format in the hinged range. The other five models share the same one-piece concept and cover progressively larger portions:
Projects that need a different footprint can be discussed as custom development rather than being forced into a standard size.
LH0703C is made in PET. The pack is formed as one piece: base, hinge and cover. There is no separate lid to align, which shortens the packing step and removes a component from stock control at the store or central kitchen.
For chilled sandwiches, material and packaging suitability for the intended storage conditions should be confirmed per SKU before a range is finalised. Lid fit, product visibility and food-contact requirements for the destination market are also confirmed by SKU.
Typical use is supermarket food-to-go, café and deli counters, convenience stores, sandwich producers and prepared food retailers. The wedge format suits cut sandwiches, and the 150 g ceiling keeps portions consistent across shifts. Packs can be filled at an in-store counter or at a central packing facility, then labelled and placed directly into a chilled display.
Standard models can be ordered as they are. Where a sandwich specification does not match a standard footprint, custom sizes, colours or mould development can be evaluated. Linhua supports concept and structural design, prototyping, mould development and mass production, so a non-standard wedge pack can be assessed as a project rather than a catalogue request.
A Canadian supermarket and grocery retail customer runs a high-volume, recurring multi-SKU supply programme of approximately 15 FCL per week over a one-year period. LH0703C is one of the sandwich, deli and pie hinged containers listed in that programme, alongside bakery and utility hinged models and larger deli, produce and catering formats.
The value to the buyer is not a single container but a standardised SKU family: existing moulds and established formats make repeat ordering and range expansion more practical than developing every item from scratch.

LH0703C sandwich wedge container, folded 168 × 88 × 82 mm.
The container folds to 168 × 88 × 82 mm and is intended for cut sandwich wedges with a suggested maximum holding weight of 150 g. Final fit depends on the actual wedge dimensions and filling weight, so a sample check against your own sandwich is recommended.
LH0703C is produced in PET. Clear PET is used on selected models in the range for strong product visibility, which lets staff and shoppers see the sandwich without opening the pack.
No dedicated sealing equipment is generally needed for normal closure of hinged and base-lid containers. The cover closes onto the base by hand at the packing table.
The format is used for refrigerated grab-and-go and deli display. Material and packaging suitability for the specific storage conditions should be confirmed per SKU before the range is approved.
Yes. The hinged range covers six models from this 150 g wedge container up to a 2 kg utility container, so a supermarket or sandwich producer can standardise a multi-SKU order across sandwich, deli, bakery and pie formats.
Custom sizes, colours or mould development can be evaluated when standard products do not meet the project. This is handled as a development project covering structural design, prototyping and mould development.
Compliance statements are based on the latest valid certificates, test reports and the applicable product scope for the destination market. Please state the target market in the enquiry so the correct documentation position can be confirmed.
Alt text should describe what the photo actually shows and must not repeat the product keyword in a chain.
Established 2004 · factory area approx. 30,000 m² · annual output 20,000 tons · export ratio 70%.