{{ variable.name }}
A continuous latex loop of 2080mm, graded from 8LB to 230LB in widths of 6.4mm to 82.5mm, built for gym floors, home workout kits, rehabilitation clinics and yoga studios.
The ZLQ-03 is a continuous-loop pull up band produced from latex on dipped-latex lines. Each loop measures 2080mm with a 0.45mm wall, while resistance runs from 8LB to 230LB across band widths of 6.4mm to 82.5mm. That spread lets a distributor, gym chain or rehabilitation clinic hold one article number and still cover mobility work, assisted pull-ups and resisted strength sets. Quoted service life is at least 20,000 stretches, and the band is covered by a ROHS and REACH test report for EU supply.



| Model | ZLQ-03 |
| Product type | Continuous loop pull up band |
| Material | Latex |
| Resistance level | 8LB – 230LB |
| Thickness | 0.45mm |
| Width | 6.4mm – 82.5mm |
| Length | 2080mm |
| Service life | ≥20,000 stretches |
| Compliance | ROHS and REACH test report, Bureau Veritas No. (9025)314-0099, issued 2025-11-25 |
| Working environment | Indoor, -10°C to 50°C, dry and low-dust |
| Color options | Multiple color grades available |
Resistance and width are configured together: buyers order the same ZLQ-03 loop across the 8LB – 230LB resistance range and the 6.4mm – 82.5mm width range, then assign colors to grades so end users can pick a band by sight. Where a programme needs a defined ladder, the five-tier grading structure (Ultra Light through Ultimate) engineered for the fitness brand programme described below can be reviewed for your order. Bands are commonly supplied together with yoga mats, fitness handles, ankle straps and workout storage bags.
Every band is a closed latex loop with a uniform 0.45mm wall and no glued joint, so there is no seam to open under repeated tension. Latex is the specified material for ZLQ-03; pigment, surface finish and logo printing are defined per order. In the brand programme below, 100% premium Malaysian natural latex with food-grade pigments was specified, and an anti-rolling surface treatment was engineered for high-load use. Production runs on 24 dipped-latex lines plus 2 dedicated latex band lines with a daily capacity of 25,000 meters.
Typical movements are muscle stretching, strength training, joint rehabilitation and yoga auxiliary exercise, with manual pulling and repeated tension as the working mode.
Logos are applied by precision silk-screen printing, and bands can be packed in customized packaging systems with anti-counterfeiting tracking, as delivered for the fitness brand programme below. Grade-to-color assignment, band width, resistance level and packaging artwork are agreed per order. An engineering team of 20 supports new product development from the Qingdao factory.
An international fitness brand in Australia has taken an annual supply exceeding 150,000 units across 12+ specialized product lines, with bands expected to run 3 – 5 years under normal use. The programme covered a proprietary latex formula with a five-tier resistance system (Ultra Light to Ultimate) held to a tension error margin within ±2%, 100% premium Malaysian natural latex with food-grade pigments compliant with REACH, RoHS and Australian safety standards, and an anti-rolling surface treatment that stops bands curling or pinching during high-load exercise. The brand reported a defect and complaint rate below 0.05% and a 20% shorter R&D-to-market cycle.

What resistance range does ZLQ-03 cover?
8LB to 230LB, with band widths from 6.4mm to 82.5mm at a 0.45mm wall.
What is the loop length?
The standard loop is 2080mm.
Which documents support EU sales?
A ROHS and REACH test report, No. (9025)314-0099, issued by Bureau Veritas on 25 November 2025, with the scope gym power pull-up assistance loop bands.
How long does one band last?
Quoted service life is at least 20,000 stretches, and the brand programme below reports 3 – 5 years of normal use.
Where should the band be used and stored?
Indoor conditions between -10°C and 50°C, in a dry, low-dust environment, across gyms, home kits, clinics and yoga studios.
Can we order a color-coded set with our logo?
Yes. Colors are assigned to resistance grades, and logos are printed by silk screen, with customized packaging and anti-counterfeiting tracking available.
What material is the band made from?
Latex. In the brand programme below, 100% premium Malaysian natural latex with food-grade pigments was specified.
Send us the resistance grades, widths, colors and packaging you need and we will quote against your specification. Contact: Jacob | Email: public@libenli.cn | Tel and WhatsApp: +86 13864846995 | Zhengyang Middle Road, Yantai, Shandong, China. Supplier: Haiyang Libenli Body-Building Apparatus Co., Ltd., founded 1997, 50,000 m² plant, 300 employees, 20 engineers, ISO 9001 certified, website www.latextubing.com.