menú

High-Altitude Integrated Screw Airend for Onboard Oxygen Supply

en stock:
SKU: 9707645946
modelo: GCU13

{{ variable.name }}

{{ value.name }}
Plateau Build

High-Altitude Integrated Screw Airend for Onboard Oxygen Supply

This plateau configuration of the GCU13 adds an altitude oxygen compensation intake port and a -40 °C to +50 °C design envelope, holding stable pressure and delivery at altitudes up to 5,000 m while keeping oil carry-over at 3 ppm or lower.

Service altitude up to 5,000 m-40 °C to +50 °C designOil carry-over 3 ppm or lowerFAD 0.9-1.6 m³/min at 7 bar

Product Summary

The GCU13 plateau configuration is the same 9-in-1 integrated airend, with an intake engineered for thin air. An altitude oxygen compensation intake port maintains delivery as ambient pressure falls, and the unit is built to a -40 °C to +50 °C envelope for the day-night swings of high-altitude routes.

The air it produces feeds onboard oxygen and nitrogen generators, so cleanliness is part of the specification: oil carry-over is held at 3 ppm or lower and the stream must be dry after the dryer and precision filter stage. Ratings remain 0.9-1.6 m³/min at 7 bar, 5-12.5 bar working pressure, 44 kg and 375 x 353 x 470 mm excluding the air filter.

Key Features

Altitude Compensation Intake

An oxygen compensation intake port sustains pressure and delivery as ambient pressure drops, validated in service up to 5,000 m.

-40 °C to +50 °C Design

Covers plateau day-night temperature swings without disturbing the air supply to the oxygen or nitrogen chain.

3 ppm Carry-over Ceiling

Protects generator membranes, air dryers and precision filters downstream of the airend.

9-in-1 Integration

Airend, separator tank, three filter positions and four valves arrive as one sealed assembly for underframe or cabinet installation.

Retrofit-Friendly Footprint

375 x 353 x 470 mm and 44 kg allow drop-in replacement in envelopes originally sized for imported airends.

CE-Compliant Build

Certificate CE-WSD-GCU-2023-001 from TUV Rheinland covers integrated airends and vehicle-mounted compressors of 2.2-45 kW.

Technical Specifications

ModelGCU13 plateau configuration
Free air delivery at 7 bar0.9-1.6 m³/min
Working pressure, max / min12.5 / 5 bar
Drive power and speed7-15 kW, 2900-6500 rpm
Oil carry-over3 ppm or lower
Design temperature envelope-40 °C to +50 °C
Valued service altitudeUp to 5,000 m
Max discharge temperature105 °C
Noise75 dB(A) or lower
Net weight44 kg
Dimensions (L x W x H)375 x 353 x 470 mm, excluding air filter assembly
Air path special featureAltitude oxygen compensation intake port
Configuration9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves

Models and Options

The unit is supplied as the 9-in-1 integrated architecture with the plateau intake; the external air filter stays optional, a conventional airend architecture is available for other package designs, and 24 V or 540 V motor options serve electric-drive air systems. An aluminium-alloy housing is under development and a high-pressure variant up to 30 bar is under evaluation, not yet released.

Plateau intake9-in-1 integratedCE certificateConventional architecture

Materials and Structure

High-grade cast iron carries the housing load. Forged alloy steel rotors, ground to the German-designed UV patented profile over 20+ machining steps at micron-level accuracy, run in SKF heavy-duty rolling bearings behind a triple-sealing shaft seal. A built-in coarse separator in the tank plus an oversized external fine separator hold carry-over at the low level the oxygen and nitrogen generators require.

Heidenhain three-coordinate measuring instrument checking machined compressor components
Dimensional inspection with a Heidenhain three-coordinate measuring instrument.

Applications

  • Plateau locomotive and coach oxygen-enrichment systems.
  • Onboard oxygen and nitrogen generation requiring clean, water-free compressed air.
  • Rail and special vehicles operating above 4,000 m.
  • Mining and engineering vehicles at high altitude that need stable air output.

Customization

Plateau projects can specify the intake arrangement, the temperature envelope and the mounting interface, with technical drawings issued for package integration. Joint development is available where the oxygen or nitrogen chain imposes its own pressure, dryness or control requirements.

Case Study

A plateau locomotive and coach oxygen supply project has run approximately 300 units over two years, delivering clean water-free compressed air for onboard oxygen and nitrogen generation, with normal operation at altitudes up to 5,000 m and stable pressure and delivery. In the parallel retrofit programme of about 300 units for aftermarket replacement and vehicle air system retrofit, supply was CE-compliant, purchase cost ran 25-30% below comparable European airends of equivalent performance, dimensions were drop-in, and lead time was 4-5 weeks against 8-10 weeks for imports.

FAQ

What altitude has this configuration operated at?

In the plateau oxygen supply project the units have operated normally at altitudes up to 5,000 m with stable pressure and delivery.

How low is the oil carry-over?

3 ppm or lower, which is the ceiling set by the onboard oxygen and nitrogen generation duty.

What temperature range is the unit designed for?

-40 °C to +50 °C, covering the large day-night difference of plateau operation.

Can existing air systems be retrofitted?

Yes. The retrofit programme used drop-in replacement dimensions, with CE-compliant supply at 25-30% lower purchase cost than comparable European airends and a documented 4-5 week lead time instead of 8-10 weeks.

Does the airend replace the dryer and filters?

No. The oxygen and nitrogen chain still uses an air dryer and precision filter; the airend delivers low carry-over, water-free after drying, compressed air into that chain.

Which certification covers export to Europe?

CE certificate CE-WSD-GCU-2023-001 from TUV Rheinland, under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217, with ISO 9001:2015 and IATF 16949 as system certifications.

Inquiry Information

Overseas sales team: service@woyo.cn | Tel +86 510 8599 6655 | WhatsApp +86 189 1237 9878

Wuxi Woyo Superdo Compressor Co., Ltd., No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China

Tell us your service altitude, ambient temperature range and required air dryness so we can confirm the plateau intake and separator configuration.

Image Filename and Alt Suggestions

  • high-altitude-screw-airend-gcu13-plateau-intake.png - GCU13 plateau airend showing the altitude oxygen compensation intake port
  • high-altitude-screw-airend-gcu13-separator.png - external fine oil separator and separator tank on the plateau air supply unit
  • high-altitude-screw-airend-gcu13-underframe.png - compact underframe mounting position for locomotive oxygen supply
  • high-altitude-screw-airend-gcu13-ce.png - CE certificate for integrated screw airends and vehicle-mounted compressors

Page SEO Reference

SEO Title: High-Altitude Integrated Screw Airend for Onboard Oxygen Supply

Meta Description: High-altitude GCU13 screw airend with oxygen compensation intake port, -40 to +50 °C design, under 3 ppm oil carry-over, for onboard O2 and N2 generation.

URL Slug: gcu13-high-altitude-screw-airend-oxygen-supply

H1: High-Altitude Integrated Screw Airend for Onboard Oxygen Supply

Primary terms: high-altitude screw airend, integrated screw compressor airend, onboard oxygen supply compressor