SEO TitleSemi Automatic Bollard LB-102 Gas Spring 304 Stainless Steel
Meta DescriptionLB-102 semi automatic bollard with gas spring lift, 6 mm wall 304 stainless steel, 600 mm blocking height and key control. No power needed at the entrance.
The LB-102 is a semi automatic bollard that uses an integrated gas spring to assist smooth manual lifting and lowering. It combines a 600 mm blocking height, a 219 mm body diameter and a 6 mm wall in 304 stainless steel, giving project teams a vehicle access control point that needs no motor, no hydraulic power unit and no control cabinet at the entrance.
The bollard is lowered and raised manually and locked with a key, sitting in an 800 mm deep embedded sleeve with a D380 x T10 mm flange. That makes it suitable for driveways, parking areas, commercial entrances, private properties and other restricted access points where a permanent but low-maintenance barrier is required.
Key Features
Gas Spring Assisted Lift
An integrated gas spring supports manual lifting and lowering, so the bollard moves smoothly without a motor or hydraulic pump and needs no on-site power to open or close.
Key Control, No Cabling
Operation is by key, which removes the need for trenching, power supply and control cabinets at the entrance and keeps access control working during power interruption.
6 mm Wall 304 Stainless Steel
The 219 mm body is built from 304 stainless steel with a 6 mm wall thickness and a satin finish, a combination intended for outdoor entrances and long service in public view.
-45 C to 75 C Operation
The stated operating temperature range of -45 C to 75 C allows the same bollard specification to be supplied across cold and hot climates in MEA, EU and SEA markets.
800 mm Sleeved Foundation
A D325 x T3 mm embedded sleeve with 800 mm depth and a D380 x T10 mm flange gives contractors a defined foundation detail before the bollard is set in place.
The standard LB-102 is supplied in 304 stainless steel with a satin finish, key control and gas spring operation. For projects that specify a different body material or surface, the same bollard can be supplied in 316 stainless steel, 201 stainless steel or galvanized steel; carbon steel components are finished with black powder coating. Buyers should confirm the material grade, finish and any dimensional requirements at quotation stage so the delivered specification matches the site drawings.
Materials and Structure
The visible body is a 219 mm diameter tube in 304 stainless steel with a 6 mm wall, finished in satin for a low-glare outdoor appearance. Inside the tube, the gas spring provides the lift assistance, and the bollard is secured by key control at the top. At ground level, the unit is located by a D380 x T10 mm flange over an embedded sleeve of D325 x T3 mm set to 800 mm depth, so the bollard travels inside the sleeve and the finished surface stays clean. Total unit weight is 58 kg, which is relevant when planning lifting equipment, shipping volume and on-site handling.
Applications
DrivewaysParking areasCommercial entrancesPrivate propertiesRestricted access pointsAirports and aviationGovernment and critical infrastructureIndustrial and manufacturingCommercial real estatePorts and logistics
Because the LB-102 needs no power at the post, it is often specified where a powered bollard would require new cabling or where the access point is used intermittently during the day.
Customization
As a factory-direct manufacturer, RICJ supports OEM/ODM customization of dimensions, materials, appearance and functional configurations for this semi automatic bollard. Alternative stainless steel grades and galvanized construction are available, and buyers can specify finish and appearance requirements for local market expectations. English technical documentation, installation manuals and remote technical support by phone, email or video are provided to help contractors and distributors complete installation and after-sales work.
FAQ
Does the LB-102 semi automatic bollard need electricity?
No. The bollard is lifted and lowered manually with gas spring assistance and is operated by key, so no power supply, hydraulic power unit or control cabinet is required at the post.
What is the blocking height and diameter?
The blocking height is 600 mm and the blocking diameter is 219 mm, with a 6 mm wall thickness in 304 stainless steel.
How deep is the foundation for installation?
The embedded sleeve is D325 x T3 mm and is set to a depth of 800 mm. The bollard is positioned with a D380 x T10 mm flange at the surface.
Which materials can be supplied?
304 stainless steel is the standard material for this model. 316 stainless steel, 201 stainless steel and galvanized steel are also listed as available material options; carbon steel parts are black powder coated.
What temperature range does it operate in?
The stated operation temperature range is -45 C to 75 C, which covers both cold-climate and hot-climate project locations.
How much does one bollard weigh?
Each unit weighs 58 kg. Plan lifting equipment and handling manpower accordingly when receiving and installing the bollards.
Can the dimensions or finish be customized?
Yes. RICJ offers OEM/ODM customization of dimensions, materials, appearance and functional configurations. Confirm the required specification with the sales team before ordering.
Image Filename and Alt Suggestions
semi-automatic-bollard-lb-102-satin-finish-front.png - Alt: LB-102 semi automatic bollard in 304 stainless steel with satin finish
semi-automatic-bollard-lb-102-flange-sleeve-base.png - Alt: Flange and embedded sleeve detail at the base of the LB-102 telescopic bollard
semi-automatic-bollard-lb-102-key-control-top.png - Alt: Key control head of the LB-102 gas spring semi automatic bollard
The front-view product photo is currently available; the two detail shots above are recommended additions for future product photography.
Inquiry Information
Send your project details, required material grade, finish and quantity so the factory can confirm the specification for the LB-102 semi automatic bollard.
