{{ variable.name }}
A heavy-duty integrated screw airend for rock drilling rigs, mining jumbos, anchor drill rigs, and mining trucks, with dust-proof intake, sealed housing, and anti-oil-emulsification design.
The GCU55L mining duty configuration is built for high-dust, high-humidity underground and open-pit sites. It provides pneumatic power for rock drills, mining jumbos, anchor drill rigs, and mining truck air systems. The dust-proof intake and sealed housing protect the airend in abrasive conditions, while the patented anti-oil-emulsification design supports reliable lubrication in humid workings. Altitude adaptation above 4,000 m and high flow of 6.3-8.1 m3/min suit plateau mining operations and 24/7 heavy-duty cycles.
| Model | GCU55L |
|---|---|
| Power | 30-37 kW |
| Speed | 4100-6000 rpm |
| FAD at 7 bar | 6.3-8.1 m3/min |
| Max. / min. working pressure | 16 / 5 bar |
| Max. discharge temperature | 105 C |
| Oil carry-over | <2 ppm (design <=3 ppm) |
| Noise | <=75 dB(A) |
| Net weight | 173 kg |
| Dimensions (L x W x H, excl. air filter assembly) | 600 x 650 x 585 mm |
| Mining configuration | Dust-proof intake; sealed housing; anti-oil-emulsification design; altitude adaptation above 4,000 m |
The mining duty GCU55L can be specified with dust-proof intake, sealed housing, and anti-oil-emulsification provisions. A 9-in-1 integrated architecture is used for compact chassis installation. For 16 bar and higher service, the external fine separator, oil filter, and safety valve must be rated at 20 bar or above. Air filter assembly and mounting interface can be matched to the drilling rig or mining truck layout.
GCU55L miningDust-proof intakeSealed housingAbove 4,000 m
The housing is high-grade cast iron. Screw rotors are forged alloy steel with a German-designed UV patented rotor profile and more than 20 precision machining steps to micron-level accuracy. SKF heavy-duty rolling bearings and triple-sealing technology support the rotating assembly. The oil separation system uses a built-in coarse separator plus an oversized external fine separator. The mining configuration adds dust-proof intake, sealed housing, and anti-oil-emulsification design for humid and abrasive conditions.
Rock drilling rigs, mining jumbos, anchor drill rigs, mining trucks, and other mining engineering vehicles. Typical duties include pneumatic power for rock drills, braking, unloading, and tyre inflation air supply. The sealed, dust-protected layout is also suited to open-pit and underground sites with high dust concentration, high humidity, and 24/7 heavy-duty operation.
Mining projects can specify dust-proof intake, sealed housing, anti-oil-emulsification design, altitude adaptation, 9-in-1 or conventional architecture, port orientation, and mounting interface. Thermal management and filtration should be confirmed against the site altitude, dust level, and duty cycle. For 16 bar and higher systems, the external fine separator, oil filter, and safety valve must be rated at 20 bar or above.
Mining equipment manufacturer, drilling rigs: approximately 250 units per year over two years for rock drilling rig, mining jumbo, and anchor drill rig pneumatic power. The units operated stably in high-dust and high-humidity underground and open-pit sites. The configuration included dust-proof intake, sealed housing, and patented anti-oil-emulsification design.
Mining truck OEM, joint development since 2024: approximately 150 units per year for braking, unloading, and tyre inflation air supply. The jointly developed mining-dedicated unit provided reliable air output at high altitude, with altitude adaptation above 4,000 m and high flow of 6.3-8.1 m3/min.
What protections are included for mining sites?
The mining duty configuration includes dust-proof intake, sealed housing, and patented anti-oil-emulsification design for high-dust and high-humidity conditions.
Can it operate above 4,000 m altitude?
Yes. Altitude adaptation above 4,000 m is part of the mining configuration for high-altitude mining truck and drilling rig air supply.
What flow is available for rock drilling?
FAD at 7 bar is 6.3-8.1 m3/min, supporting rock drilling, unloading, braking, and tyre inflation duties.
Is the 9-in-1 layout suitable for mining vehicles?
Yes. The 9-in-1 layout combines the airend, oil-gas separator tank, filters, and valves for compact chassis installation.
What pressure class is supported?
The GCU55L supports 16/5 bar working pressure. For 16 bar and higher systems, the external fine separator, oil filter, and safety valve must be rated at 20 bar or above.
Please share the machine type, site altitude, dust and humidity level, duty cycle, required FAD and pressure, mounting interface, and whether dust-proof intake or sealed housing is required. Drawings and interface details can be reviewed before order confirmation.
Contact: Overseas Sales Team | Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
| Filename | gcu55l-mining-duty-dust-proof-intake.png |
|---|---|
| Alt text | GCU55L mining duty screw airend with dust-proof intake and sealed housing |
| Filename | gcu55l-mining-duty-9in1-chassis.png |
| Alt text | GCU55L 9-in-1 integrated airend layout for mining drilling rig chassis installation |
