menú

Dust-Proof Anti-Emulsification Screw Airend for Mining Drill Rigs

en stock:
SKU: 0398893098
modelo: On-board Air Compressor (NEV)

{{ variable.name }}

{{ value.name }}
MINING ENGINEERING VEHICLES

Dust-Proof Anti-Emulsification Screw Airend for Mining Drill Rigs

Sealed integrated housing, dust-proof intake, patented anti-oil-emulsification design and altitude adaptation above 4,000 m.

SEO Title: Dust-Proof Anti-Emulsification Screw Airend for Mining Drill Rigs

Meta Description: Dust-proof screw airend for mining drill rigs and underground jumbos: sealed housing, anti-oil-emulsification design, 2.2-4 kW, 12.5 bar, 45 kg, oil carry-over below 2 ppm.

URL Slug: dust-proof-screw-airend-mining-drill-rig

Product Summary

Underground and open-pit mining duty is hard on an air compressor: high dust concentration, high humidity, altitude up to 5,000 m and 24/7 heavy operation. This integrated screw airend addresses that combination with a dust-proof intake, a sealed integrated housing and a patented anti-oil-emulsification design (ZL2025 1 1888313X) for vehicle screw air compressors, so pneumatic power stays available for rock drills, mining jumbos, anchor drill rigs and mining trucks. The 9-in-1 assembly places the airend, oil-gas separator tank with built-in coarse separator, three filters and four valves in a 410 x 330 x 310 mm, 45 kg package. Power is 2.2-4 kW, free air delivery 0.25-0.4 m3/min at 7 bar, maximum working pressure 12.5 bar, maximum discharge temperature 105 C and noise 75 dB(A) or lower.

Key Features

Dust-Proof Intake

Intake protection for high-dust underground and open-pit sites, supporting stable operation in the drilling rig programme.

Sealed Integrated Housing

Encloses the 9-in-1 assembly against dust and humidity ingress on chassis-mounted mining equipment.

Patented Anti-Oil-Emulsification

Method and system patent ZL2025 1 1888313X addresses oil emulsification in vehicle screw air compressors, protecting lubrication in humid workings.

Altitude Adaptation Above 4,000 m

Altitude oxygen compensation port supports air output at high altitude, as applied in the mining truck programme.

Oil Carry-Over Below 2 ppm

Design limit 3 ppm; cleaner air protects drill rig valves, lubricators and downstream tools.

45 kg, 410 x 330 x 310 mm

Compact footprint eases installation on drill rigs, jumbos and truck chassis where space is limited.

Technical Specifications

Power2.2-4 kW
Speed3500 rpm
Free air delivery at 7 bar0.25-0.4 m3/min
Working pressureMaximum 12.5 bar / minimum 5 bar
Maximum discharge temperature105 C
Oil carry-overBelow 2 ppm (design limit 3 ppm)
Noise75 dB(A) or lower
Net weight45 kg
Dimensions (L x W x H, excl. air filter assembly)410 x 330 x 310 mm
Mining protectionDust-proof intake, sealed integrated housing, patented anti-oil-emulsification design (ZL2025 1 1888313X)
Altitude adaptationAbove 4,000 m, with altitude oxygen compensation intake port
Configuration9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters + 4 valves
Motor options24 V DC / 540 V DC
Housing materialHigh-grade cast iron (aluminium-alloy housing under development)

Models and Options

  • Standard 2.2-4 kW integrated unit for drill rig, jumbo and anchor drill rig pneumatic supply.
  • Mining-dedicated configuration developed jointly with a mining truck OEM for braking, unloading and tyre inflation air supply, applied above 4,000 m.
  • The mining-dedicated programme also covers higher-flow configurations with 6.3-8.1 m3/min air output for mining truck air systems.
  • Motor voltage options of 24 V DC or 540 V DC; air filter optional.

Materials and Structure

  • High-grade cast iron housing with sealed integrated layout; aluminium-alloy housing under development.
  • Forged alloy steel screw rotors with a German-designed UV patented rotor profile, 20+ precision machining steps and micron-level accuracy.
  • SKF heavy-duty rolling bearings and triple-sealing shaft seal technology for dusty, humid conditions.
  • Built-in coarse separator plus oversized external fine separator for oil removal.
  • Patent coverage includes the rotor profile (ZL2012 1 0087353.0), improved airend structure (ZL2008 1 0087353.0), vehicle air compressor (ZL2010 1 0110513.X) and rotor deburring platform (ZL2014 1 0583891.8).

Applications

Pneumatic power for rock drilling rigs, mining jumbos and anchor drill rigs working in high-dust and high-humidity underground and open-pit conditions, plus braking, unloading and tyre inflation air supply for mining trucks. The same platform is used on construction machinery, new energy mining trucks, special vehicles and rail auxiliary air systems.

Customization

Mining configurations are set against dust level, humidity, altitude and the air consumer on the machine, with the altitude oxygen compensation port specified where site altitude requires it. Motor voltage (24 V DC or 540 V DC) is selected per vehicle platform, the air filter is optional, and standardised mounting interfaces support fleet-level replacement programmes.

Case Study - Mining Equipment Manufacturer (Drilling Rig)

Approximately 250 units per year over two years for rock drilling rig, mining jumbo and anchor drill rig pneumatic power sources, with stable operation in high-dust and high-humidity underground and open-pit sites. Configuration highlights: dust-proof intake, sealed housing and patented anti-oil-emulsification design.

A second reference is a mining truck OEM with joint development since 2024, approximately 150 units per year for braking, unloading and tyre inflation air supply, resulting in a mining-dedicated unit with reliable air output at high altitude and altitude adaptation above 4,000 m.

FAQ

How is the unit protected against dust?

The mining configuration uses a dust-proof intake and a sealed integrated housing around the 9-in-1 assembly.

What causes oil emulsification and how is it addressed?

Humidity in the intake air can emulsify lubricating oil. The patented anti-oil-emulsification method and system (ZL2025 1 1888313X) is applied to vehicle screw air compressors to prevent it.

Can it work at high altitude?

Yes. An altitude oxygen compensation intake port is available and the mining truck programme applies the unit above 4,000 m.

What are the flow and pressure figures for the standard unit?

0.25-0.4 m3/min at 7 bar, minimum 5 bar and maximum 12.5 bar working pressure, with a maximum discharge temperature of 105 C.

Is a higher-flow version available for mining trucks?

Yes. The mining-dedicated programme covers configurations with 6.3-8.1 m3/min air output for truck air systems.

Which quality documents are available?

ISO 9001:2015 certified by SGS (CN-ISO9001-WSD-2024-012), IATF 16949 automotive quality management and CE under TUV Rheinland (CE-WSD-GCU-2023-001).

How much does the airend weigh and how large is it?

45 kg net weight, 410 x 330 x 310 mm excluding the air filter assembly.

Inquiry Information

Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output, 35 engineers.

Email: service@woyo.cn  |  Tel: +86 510 6599 6655  |  WhatsApp: +86 189 1237 9878

Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China

Tell us your machine type, site altitude, dust and humidity conditions and required air consumers so the mining configuration can be specified.

Image Filename and Alt Suggestions

  • dust-proof-screw-airend-mining-drill-front.png - Alt: Dust-proof screw airend for mining drill rig, front view with sealed housing
  • dust-proof-screw-airend-mining-drill-intake.png - Alt: Dust-proof intake and filter ports on mining screw airend
  • dust-proof-screw-airend-mining-drill-mounted.png - Alt: Integrated screw airend mounted on a mining drill rig chassis