menú

Aerial Platform Truck

en stock:
SKU: 2063039925
modelo: Aerial Platform Truck

{{ variable.name }}

{{ value.name }}

Product Specification

TypeAerial Platform Truck, Aerial Work Platform Truck, Manlift Truck, Bucket Truck, Cherry Picker Truck, Boom Lift Truck, MEWP Truck, Truck-Mounted Aerial Platform, Telescopic Boom Lift, Articulated Boom Lift, Scissor Lift, Boom Lift TruckModelAerial Platform Truck
ParamsCONFIGURATION - Product family: truck-mounted aerial work platform, self-propelled telescopic boom lift and electric scissor lift - Truck-mounted layout: 4x2 chassis with the boom turntable and basket behind the cab; light, medium and heavy chassis available - Drive configuration: 4x2 standard; 4x4 for rough ground; 6x4 with a longer boom and a larger platform - GVW: 7,445 kg and curb weight 7,250 kg on the quoted 4x2; heavier chassis by boom length - Overall dimensions: 8,300 x 2,200 x 3,300 mm; wheelbase 3,800 mm; track 1,770 / 1,586 mm - Cab: 2-3 seats, left-hand or right-hand drive, air conditioner - Max road speed: 99 km/h on the quoted unit PLATFORM AND BOOM - Max working height: 14 m on the truck-mounted unit, 20.3 m on the self-propelled telescopic boom, 15.7 m on the electric scissor lift - Platform floor height: 18.3 m on the telescopic boom and 13.7 m on the scissor lift; working height is platform floor height plus about 2 m, and both figures are quoted - Max working radius: 7.5 m on the truck-mounted unit; horizontal extension 15.09 m on the telescopic boom - Platform rated load: 200 kg on the truck-mounted and scissor units, 230 kg on the telescopic boom; 2 persons - Basket: 0.91 x 2.43 m on the telescopic boom; 2.64 x 1.14 m plus a 0.9 m extension deck rated 113 kg on the scissor lift - Rotation: 360 degrees continuous slew on the truck-mounted and telescopic units; platform rotation 160 degrees on the telescopic unit - Boom type: telescopic 2-3 section standard; articulated knuckle boom where the basket must reach over a roof edge, a sign or a tree crown - Rated sling load: 1,000 kg where a lifting hook is specified, quoted apart from the basket load OUTRIGGERS AND STABILISATION - Outriggers: four hydraulic H-type, individually controlled from the ground station, with load-holding valves - Protraction: 640 mm front and 180 mm rear on the quoted model, footprint wider than the chassis - Pads: rubber or nylon pads supplied for asphalt, paving and soft ground - Levelling: bubble level and outrigger indicator; the boom is not to be operated until the outriggers are set and the unit is level CHASSIS AND DRIVELINE - Engine: diesel, 91 kW / 3,856 ml on the quoted 4x2; larger displacement on medium and heavy chassis - Transmission: 5-6 speed manual; automated manual or automatic optional - Axles: front 3,100 kg and rear 4,345 kg on the quoted unit - Suspension: leaf springs 8/10+7; air suspension optional - Brakes: air brake with ABS, exhaust brake and spring parking brake - Tires: 7.50-16, 6 tires on the quoted unit; 7.50R16 to 10.00R20 by chassis; 24 V electrical system PERFORMANCE - Drive speed: 6.8 km/h stowed and 0.8 km/h elevated on the telescopic boom; 4 km/h and 0.8 km/h on the scissor lift - Gradeability: 45 percent on the telescopic boom, 25 percent on the scissor lift - Turning radius: 2.4 m inside and 5.13 m outside on the telescopic boom; 0 and 2.25 m on the scissor lift SAFETY - Dual control: ground control box and basket control box, each with emergency stop, basket priority - Anti-drop safety system on the 360 degree rotation; harness anchor points in the basket - Hydraulic safety: balance valve and emergency lowering valve, check valves on the cylinders, manual pump for emergency descent - Control system: CAN bus with load-sensitive proportional valves and controllers; large display at the ground station - Protection: tilt and overload protection, upper and lower limit switches, basket levelling - Warning: two rotating amber lights, work lights, horn and reflective markings; wheel chocks, outrigger pads and fire extinguisher supplied QUALITY AND DELIVERY - Pre-shipment check: boom and platform cycle test, outrigger and levelling test, hydraulic pressure and leak test, safety device test, brake test and road test - Warranty: 12 months for major components; valves, cylinders and controllers under supplier terms - Lead time: about 30-45 working days from down payment - Export documents: invoice, packing list, bill of lading, certificate of origin and insurance - Trade terms: FOB, CIF or DAP; container, flat rack or RoRo shipment - Spare-parts kit: seal kits, hoses, filters, control valves, lamps and touch-up paintMaterialBoom and mast: welded high-strength steel box section, Q345 and Q460 plate, with reinforcement at the pivot and hinge points. Turntable and base frame: Q345 steel plate with a machined slew ring and hardened pinions. Basket: steel or aluminium checker plate floor, 1.1 m guardrails with mid-rail and toe board, aluminium version for lower basket weight. Outrigger beams and legs: high-strength steel with forged feet and rubber pads. Hydraulic cylinders: honed steel tubes with hard-chrome plated piston rods. Hoses: two-wire braided rubber with crimped fittings. Chassis frame: Q235/Q345 channel 6-8 mm. Cab: welded steel with tempered glass, anti-corrosion primer and polyurethane topcoat. Fittings: galvanised steps, stainless fasteners, LED lamps and wiring harness. Platform surface: anti-slip pattern plate with drainage holes.
Applicable IndustryPower distribution and utility companies working on overhead lines. Street lighting and municipal maintenance departments. Telecommunications and fibre network operators. Construction contractors working on facades, roofs and structures. Painting, coating and cladding crews. Signage and billboard installation. Tree care and arboriculture. Airports, ports and railway yards for lighting and gantry maintenance. Oil, gas and chemical plants for inspection at height. Wind and solar farms. Facilities management and cleaning companies. Warehousing and logistics for order picking and rack maintenance. Events, stadiums and exhibition halls. Fire, rescue and disaster response. Shipyards and offshore yards. Building inspection, survey and insurance assessment.

Feature

1. One supplier for the whole access fleet. A 14 m truck-mounted boom for road and utility work, a 20.3 m self-propelled telescopic boom for rough ground and a 15.7 m electric scissor lift for indoor work can be ordered together, so a rental fleet or a municipal department keeps one specification language and one spare-parts list. 2. 14 m working height on a 4x2 chassis. The quoted unit reaches 14 m with a 7.5 m working radius, a 200 kg basket and 360 degrees continuous rotation, which covers street lighting, overhead cabling, signage, facade repair and tree work without a heavier truck. 3. Reach over the obstacle, not around it. Where the basket has to pass a roof edge, a billboard or a tree crown, an articulated knuckle boom is quoted instead of a straight telescopic boom, and the basket rotation of 160 degrees on the self-propelled unit lets the operator face the work. 4. 360 degrees continuous slew with an anti-drop system. The basket is positioned by turning the turntable rather than by reversing the truck, and the rotation is protected by a dedicated anti-drop safety system, so a job that needs three truck positions can be done from one. 5. Dual controls, basket priority. The ground station and the basket each have a full control box with emergency stop; the basket takes priority, and a manual pump gives emergency descent if the engine or the hydraulics stop. 6. Outriggers spread wider than the chassis. Four hydraulic H-type outriggers are controlled individually from the ground station, with 640 mm front and 180 mm rear protraction on the quoted model, and rubber or nylon pads are supplied for asphalt, paving and soft ground. 7. Two ratings that are never mixed. The basket is rated 200 kg for two persons and tools, and the lifting hook, where specified, is rated 1,000 kg as a sling load; the two figures are quoted separately so the machine is not used as a crane. 8. Working height and platform height quoted separately. The industry quotes working height as platform floor height plus about 2 m, and both numbers are given for every model, so a buyer comparing a 14 m unit with a 20.3 m unit is comparing the same measurement. 9. Self-propelled units for sites without a truck. The telescopic boom reaches 20.3 m working height and 15.09 m horizontal extension, climbs a 45 percent grade, drives at 6.8 km/h stowed and 0.8 km/h elevated, and turns in 2.4 m inside radius, so it works in a yard or on a site where a truck-mounted unit cannot set its outriggers. 10. Electric scissor lift for indoor and emission-free work. 15.7 m working height, 200 kg platform load, a 2.64 x 1.14 m platform with a 0.9 m extension deck, 25 percent gradeability and quiet battery drive suit warehouses, exhibition halls, airports and finished interiors. 11. Built for the destination market. Left-hand and right-hand drive, engines matched to local fuel sulphur levels, tropical cooling and dust protection for hot and dry sites, and a cold-start package where winter work is expected. 12. Export handling in one set. Invoice, packing list, bill of lading, certificate of origin and insurance are prepared together, units ship by container, flat rack or RoRo under FOB, CIF or DAP terms, and the hydraulic system is protected for the sea passage with a spare-parts kit on board.

elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck


elorry-aerial-platform-truck

elorry-aerial-platform-truck