SEO Title: 9DST Intermediate Wire Drawing Machine | 1200 m/min Bare Copper · Meta Description: 9DST intermediate wire drawing machine draws bare copper from Ф2.5-3.0 mm to Ф1.0-2.8 mm at up to 1200 m/min, with AC55kW drive, 9 dies and CE conformity. · URL Slug: 9dst-intermediate-wire-drawing-machine · H1: 9DST High Speed Intermediate Wire Drawing Machine for Bare Copper
9DST High Speed Intermediate Wire Drawing Machine for Bare Copper
Model 9DST
Up to 1200 m/min
Inlet Ф2.5–Ф3.0 mm
Outlet Ф1.0–Ф2.8 mm
9 Dies
CE Conformity
Product Summary
The LISTRONG 9DST is an intermediate wire drawing machine built for bare copper wire. Copper rod enters at Ф2.5–Ф3.0 mm and leaves as finished wire between Ф1.0 mm and Ф2.8 mm, drawn through nine dies on two horizontally arranged shafts. Maximum mechanical speed reaches 1200 m/min, and the machine holds 1000–1200 m/min on Ф0.8–Ф1.5 mm wire, 800–1000 m/min on Ф1.5–Ф2.0 mm wire and 500–800 m/min on Ф2.0–Ф2.78 mm wire. An AC 55 kW induction drive motor and an AC 11 kW spooler motor work with variable frequency control and a tension system that automatically tracks drawing-speed changes, keeping outer diameter tolerance extremely small and the wound wire smooth and compact. The 9DST is named in a CE certificate issued for the EU market under EN ISO 12100:2010 and EN 60204-1:2018/A1:2025.
Key Features
1200 m/min maximum mechanical speedNine dies on two horizontally arranged shafts deliver high output, with a speed band per finished diameter so you can match throughput to your product mix.
AC 55 kW drive and AC 11 kW spooler motorsVariable frequency control with dual VFD/servoir drive technology supports high-speed yet stable production across the shift.
Precise tension control systemTension is tracked automatically as drawing speed changes, helping hold an extremely small outer diameter tolerance and producing smooth, compact wiring.
Servo traversing with limit detection switchSpool build stays even from flange to flange, reducing manual adjustment between bobbins.
Fully immersing lubrication at 150 L/minDie and wire are continuously flooded, supporting consistent surface quality on bare copper.
CE conformity for the EU marketCertificate CE-JL26020401-AL-MD issued by ICG to EN ISO 12100:2010 and EN 60204-1:2018/A1:2025, issued 2026-02-10.
Technical Specifications
| Parameter | Value |
|---|
| Model | 9DST |
| Machine type | Intermediate wire drawing machine |
| Usage | Bare copper wire drawing |
| Drawing method | 2 shafts, horizontal arrangement |
| Inlet diameter | Ф2.5–Ф3.0 mm |
| Outlet diameter | Ф1.0–Ф2.8 mm |
| Maximum mechanical speed | 1200 m/min |
| Speed by finished diameter | Ф0.8–Ф1.5 mm: 1000–1200 m/min
Ф1.5–Ф2.0 mm: 800–1000 m/min
Ф2.0–Ф2.78 mm: 500–800 m/min |
| Dies | 9 dies, customer self-provided; Ф28 mm × 15 mmT or Ф25 mm × 15 mmT |
| Mechanism surface reduce rate | No.1 to No.8: 19.5%; No.9: 16% |
| Drawing lubrication | Fully immersing type |
| Lubrication oil requirement | 150 L/min |
| Drive motor | AC 55 kW induction motor |
| Spooler motor | AC 11 kW induction motor |
| Traversing | Servo motor with limit detection switch |
| Safety door | Sliding door |
| Main material | Steel |
| Power supply | Three-phase ~AC 3×380 V (±10%); single-phase ~AC 220 V (±10%); frequency 50 Hz (±2%) |
| Compressed air | Working pressure 0.6–0.7 MPa; fluctuation ±0.02 MPa; dew point −25 °C; flow 200 L/min |
| Cooling water | Working pressure 0.2–0.4 MPa; temperature ≤25 °C; pH 7–8; flow 420 L/min. Water must be free of suspended solids, minerals, metal impurities, insoluble or corrosive substances |
Models and Options
The 9DST is configured around a nine-die, two-shaft horizontal drawing line for bare copper. Two die holder dimensions are accepted — Ф28 mm × 15 mmT or Ф25 mm × 15 mmT — and the nine drawing dies themselves are supplied by the customer, which lets you keep die geometry matched to your own wire program.
The same CE certificate also covers other LISTRONG models, including 17DST, 13DST, 14DT, 22DTA, 24DT, 24DW, 26DW and the WDF450 and LHD450 series. Ask our sales team for the specification of the model that matches your inlet and finished wire sizes.
Materials and Structure
The 9DST is built in steel with two drawing shafts in horizontal arrangement and nine die positions in series. Lubrication is handled by a fully immersing system sized for 150 L/min oil flow, so dies and wire stay flooded through the pass line. Wire take-up uses a servo-driven traversing unit with a limit detection switch, and the operator side is closed by a sliding safety door. The cooling water circuit is specified at 0.2–0.4 MPa, ≤25 °C, pH 7–8 with 420 L/min flow and must be free of suspended solids, minerals, metal impurities and corrosive substances.
Applications
The 9DST suits bare copper wire drawing in wire and cable manufacturing, metal product processing, and hardware standard components production. Because it is an intermediate machine, it takes rod from Ф2.5–Ф3.0 mm down to the intermediate range of Ф1.0–Ф2.8 mm. LISTRONG also manufactures annealing machines and wire bunching machines for bare copper, copper alloy and stainless steel wire, so the 9DST can be planned into a wider line layout.
Customization
Machine-side adaptation starts with the die holder: select the Ф28 mm × 15 mmT or Ф25 mm × 15 mmT die size and supply your own nine dies. Before an order is placed, our engineering team confirms your incoming rod diameter, required finished diameter and wire type against the 9DST speed bands. For any configuration question outside the published specifications, contact our sales engineers directly rather than assuming a value.
Frequently Asked Questions
Which wire diameters can the 9DST draw?It draws bare copper from an inlet of Ф2.5–Ф3.0 mm to a finished wire of Ф1.0–Ф2.8 mm, using nine dies in a two-shaft horizontal arrangement.
What drawing speed can we expect?Maximum mechanical speed is 1200 m/min. Published bands are 1000–1200 m/min for Ф0.8–Ф1.5 mm, 800–1000 m/min for Ф1.5–Ф2.0 mm and 500–800 m/min for Ф2.0–Ф2.78 mm.
Are the drawing dies included with the machine?No. The nine dies are customer self-provided and must suit the Ф28 mm × 15 mmT or Ф25 mm × 15 mmT die holder.
What motors and drives does the 9DST use?An AC 55 kW induction drive motor, an AC 11 kW spooler motor and a servo motor for traversing with a limit detection switch. Control is by variable frequency, with dual VFD/servo drive technology.
What lubrication and utilities are required?Fully immersing lubrication with 150 L/min oil flow; power at 3×380 V (±10%) and 220 V (±10%), 50 Hz (±2%); compressed air at 0.6–0.7 MPa, 200 L/min, dew point −25 °C; cooling water at 0.2–0.4 MPa, ≤25 °C, pH 7–8, 420 L/min without suspended solids, minerals, metal impurities or corrosive substances.
Is the 9DST CE certified?Yes. Certificate CE-JL26020401-AL-MD was issued by ICG for the EU market on 2026-02-10 and is valid to 2031-02-09, to EN ISO 12100:2010 and EN 60204-1:2018/A1:2025. The 9DST is listed in the certificate scope.
What is the reduction rate per pass?From pass No.1 to No.8 the mechanism surface reduce rate is 19.5%, and pass No.9 is 16%.
Who manufactures the 9DST?The machine is built by Jiangsu Listrong Mechanical & Electrical Co., Ltd., founded in 2009, with a 15,000 m² factory, 70 employees, a 15-engineer team and an annual output of 550 sets. Export share is 40%, mainly to the Middle East, India and South East Asia.
Inquiry Information
Image Filename and Alt Suggestions
- wire-drawing-machine-9dst-overview.jpg (current product photo) — Alt: “9DST intermediate wire drawing machine for bare copper wire drawing”.
- Recommended future captures for the gallery: control panel with VFD readouts — Alt: “9DST wire drawing machine control panel with frequency drive”; spooler and servo traversing unit — Alt: “9DST spooler and traversing unit with limit detection switch”; die holder and lubrication tank — Alt: “Nine-die holder and full immersion lubrication tank on the 9DST”.
