menú

8x4 Heavy Duty Tipper Truck with NM400 Wear Steel Body for Mining

en stock:
SKU: 4450372689
modelo: Heavy Duty Truck

{{ variable.name }}

{{ value.name }}

8x4 Heavy Duty Tipper Truck with NM400 Wear Steel Body for Mining

8x4 drive · NM400/NM450 wear steel · 15,000-45,000 kg payload
SEO Title: 8x4 Heavy Duty Tipper Truck NM400 Wear Steel Body | ELORRY
Meta Description: 8x4 heavy duty tipper truck with NM400/NM450 wear-resistant steel body and rear or side tipping for mining, quarry and infrastructure haulage. Get a quote.
URL Slug: 8x4-heavy-duty-tipper-truck

Product Summary

The ELORRY 8x4 heavy duty tipper truck is specified for mining, quarry and infrastructure work. A 300-320 mm ladder frame of Q345 high-strength steel carries a wear-resistant NM400/NM450 tipping body, with rear or side tipping for ore, coal, overburden and aggregate. Rated payload is 15,000-45,000 kg depending on body type, and gradeability of 25-35% suits loaded climbs out of pits and quarries.

Power comes from a 300-560 hp turbocharged and intercooled diesel with a 9-16 speed manual or optional AMT gearbox, matched to a heavy-haul axle ratio. Inter-wheel and inter-axle differential locks are optional, and a power take-off drives the tipping pump.

Key Features

NM400/NM450 wear steel

The tipping body uses wear-resistant steel for ore, coal and overburden, extending body life in abrasive quarry work.

15,000-45,000 kg payload

Payload and body size are balanced against axle loads within local road regulations.

Rear or side tipping

Tipping direction is chosen for the site layout and discharge point.

Differential locks optional

Inter-wheel and inter-axle locks help traction on loose and uneven site roads.

PTO for tipping pump

Power take-off and pump drive are built into the driveline for the tipper body.

Gradeability 25-35%

Gearing selected for loaded climbs out of pits, quarries and construction sites.

Technical Specifications

ItemSpecification
Drive configuration8x4; 6x4 dump and 6x6 off-road also available
Rated payload15,000-45,000 kg depending on drive and body
Tipper bodyRear or side tipping; NM400/NM450 wear-resistant steel
FrameQ345 ladder frame, 300-320 mm deep, 8-10 mm thick
EngineDiesel 6-cylinder turbocharged, 300-560 hp, 1,200-2,600 N.m
Transmission9-16 forward speeds and 2 reverse; AMT optional
AxlesFront 7,500-9,000 kg; rear 13,000-16,000 kg each, tandem
Gradeability25-35% depending on driveline and load
BrakesDual-circuit air brake, ABS standard, spring parking brake
Tires12.00R20, 12R22.5 or 315/80R22.5
EmissionEuro II, III, IV or V; Euro VI on request

Models and Options

  • 8x4 tipper as standard, with 6x4 dump and 6x6 off-road chassis available.
  • Rear or side tipping body in NM400/NM450 wear steel.
  • Optional inter-wheel and inter-axle differential locks.
  • Retarder or engine brake for steep site descents.
  • Tropical package with reinforced radiator and dust shield for hot, dusty pits.

Materials and Structure

The ladder frame is Q345 high-strength structural steel, 300-320 mm deep and 8-10 mm thick, with reinforced cross members and gussets. The tipping body uses Q235/Q345 structural steel with NM400/NM450 wear-resistant steel for mining and quarry duty. The cab is a welded steel body with tempered glass, electrophoretic primer and anti-corrosion coating, and the tipping cylinder is hard-chrome-plated with high-pressure hoses and brass or stainless fittings.

Applications

Mining and quarrying of ore, coal and overburden; construction and infrastructure including roads, bridges, tunnels, dams and airports; site haulage at mining camps and remote project sites; aggregate and bulk commodity transport.

Customization

Custom RAL color, company logo and fleet unit numbers. Cold package with fuel heater and engine preheater for -30°C starts, or tropical package with reinforced radiator, dust shield and high-capacity air conditioner for hot climates. Fleet equipment including telematics, GPS, driver fatigue camera and tire pressure monitoring can be added.

Case Study

8x4 heavy duty truck batch - El Salvador, mining and construction fleet operator. Delivered June 2025 and in service for approximately 17 months at the time of feedback. Application covers heavy-duty hauling for mining, construction and infrastructure works. The client highlighted the reinforced structure, powertrain performance and cab comfort, and provided written feedback on quality and delivery efficiency, rating the team as professional and reliable. No KPI figures are available.

Image Filename and Alt Suggestions

ELORRY 8x4 heavy duty tipper truck on construction siteELORRY 8x4 tipper truck rear tipping body in quarryELORRY 8x4 tipper truck cab and wear steel bodyELORRY heavy duty tipper truck front view
  • 8x4-heavy-duty-tipper-truck-06-site-haul.png
  • 8x4-heavy-duty-tipper-truck-07-rear-tipping.png
  • 8x4-heavy-duty-tipper-truck-05-cab-body.png

FAQ

What body steel is used for mining?

The tipping body uses NM400/NM450 wear-resistant steel for ore, coal and overburden haulage.

Rear or side tipping?

Both are available and selected against the site layout and discharge point.

What payload can the 8x4 carry?

Rated payload is 15,000-45,000 kg depending on drive configuration and body type, balanced to local axle-load rules.

Are differential locks available?

Yes, inter-wheel and inter-axle differential locks are optional for loose and uneven site roads.

Can it start in cold climates?

Yes. A cold package with fuel heater, engine preheater and winter-grade lubricants supports -30°C operation.

How is it inspected before shipment?

Each unit completes a static check, brake test, road test and load test, backed by a 12-month major-component warranty.

Inquiry Information

Share your site conditions, payload target and tipping direction to receive a body drawing and axle-load table. Contact ELORRY at info@elorry-ind.com or WhatsApp +86-16638078903. Mixed body types can be consolidated in one shipment under FOB, CIF or DAP terms.