menú

8x4 25,000 L Water Sprinkler Truck for Wide Carriageways

en stock:
SKU: 190093955X
modelo: Water Sprinkler Truck

{{ variable.name }}

{{ value.name }}
8x4 High Volume Format

8x4 25,000 L Water Sprinkler Truck for Wide Carriageways

The largest build in the range: 20,000-25,000 L on an 8x4 chassis, with a rear bar reaching 18 m and a front flush of up to 16 m for multi-lane roads and long hauls.

20,000-25,000 LRear bar to 18 m6 mm shellGVW to 31,000 kg
8x4 water sprinkler truck with wide tank for multi lane road watering

Product Summary

Where the route is a multi-lane carriageway, an airport perimeter road or a long industrial haul, the limiting factor is time between refills, not manoeuvrability. This 8x4 build carries 20,000-25,000 L, sits at the top of the 7,495-31,000 kg GVW band, and runs up to 11,000 mm long and 2,500 mm wide with a wheelbase up to 5,950 mm. The rear sprinkler bar reaches 18 m and the front flush up to 16 m, so wider pavements are covered in fewer passes; for reference, a 20,000 L load at a 14 m width and 10-15 km/h waters roughly 5-7.5 km in about 30 minutes of spraying. A 6 mm shell and a 120-micron epoxy lining handle long days on silt-heavy service water.

Key Features

Fewer trips on wide roads

The 20,000-25,000 L tank cuts refill trips on multi-lane carriageways, where the rear bar covers up to 18 m in a single pass.

Six-millimetre shell and thick heads

Above 12,000 L the tank plate is 6 mm, with dished heads one gauge thicker and baffles every 1.5-2 m to limit surge on a part-full tank.

Front flush to 16 m

Two adjustable bumper nozzles spread 8-16 m and can be set to a jet for compacted mud or a fog for light dust ahead of the wheels.

Axles and tyres for the load

Front axles 2,500-7,000 kg and rear 4,000-16,000 kg, on 7.00R16 to 12.00R20 tyres, 6-10 plus one spare, with hub reduction optional.

Pump and suction for remote sites

40-90 m3/h at 45-90 m head, 6-8 m suction lift and a 3-5 m hose, so a long section without a hydrant is still workable.

Cab-controlled circuits

Front, rear, side and cannon valves are operated from the cab with manual override at the rear platform and a low-level alarm.

Technical Specifications

ItemSpecification
Drive configuration8x4
Tank volume20,000-25,000 L
GVWUp to 31,000 kg depending on chassis and tank volume
Overall lengthUp to 11,000 mm
Overall widthUp to 2,500 mm
WheelbaseUp to 5,950 mm
Tank shellQ235B or Q345B carbon steel 6 mm above 12,000 L, heads one gauge thicker
InteriorEpoxy anti-corrosion coating 120 microns or more; stainless 304 shell optional
Pump40-90 m3/h, head 45-90 m, suction lift 6-8 m
Rear spray bar10-18 m, bar height 300-800 mm, adjustable for wind drift
Front flush8-16 m, jet or fog pattern
Water cannon28-40 m, 360 degrees, -10 to +60 degrees
Working pressure0.3-0.8 MPa, main pipe DN65, nozzle orifice 16-22 mm
AxlesFront 2,500-7,000 kg, rear 4,000-16,000 kg, hub reduction optional
Tyres7.00R16 to 12.00R20, 6-10 plus one spare
Fuel tank100-400 L
EngineDiesel 90-270 hp, Euro II to Euro V
SpeedMaximum 90-95 km/h, spraying 8-20 km/h
Gradeability25-30 percent

Specifications are the build range for this configuration and are confirmed on the order sheet.

Models and Options

Two volumes are offered on the 8x4 chassis: 20,000 L and 25,000 L. Options specified at order include a stainless 304 tank shell, a 30-60 m fog cannon, a 10-15 MPa high-pressure washer, a dosing unit for pesticide or disinfectant, wireless remote control and a sleeper cab. Left-hand and right-hand drive are both available.

Materials and Structure

The shell is 6 mm Q235B or Q345B plate above 12,000 L, with dished heads one gauge thicker and anti-surge baffles every 1.5-2 m. One or two hinged manhole covers of 450-600 mm with lock and dust seal sit on top, alongside a top filler with strainer; the lowest point carries a 2-4 inch drain valve, with overflow pipe and vent. A sight tube plus electric gauge with cab alarm shows the level. The top has an anti-slip walkway, ladder and handrail, and the rear working platform is railed. Piping is galvanised DN65 with flanged joints; the cannon is aluminium alloy with a brass nozzle and worm-gear rotation.

Applications

  • Multi-lane carriageway washing and dust binding on long sections
  • Highway and airport perimeter road watering
  • Mining and quarry haul road dust control with fewer refill stops
  • Large industrial plants, steel and cement yards for cooling and washing
  • Municipal districts covering wide avenues and squares
  • Drought relief and bulk water delivery where the route is long

Customization

Tank volume, spray widths, axle ratings and optional equipment are set against the carriageway width, daily area, haul length and water source. Where a site has no hydrant, the suction set and pump flow are matched to the draw point; where the priority is dust on a wide haul road, the rear bar width and cannon range are specified together. Climate packages for -20 to 45 degrees C operation are selected on the same order sheet.

FAQ

Why choose 8x4 over 6x4?

The 8x4 build carries 20,000-25,000 L and covers wider pavements with a rear bar up to 18 m, which reduces refill and return trips on long or multi-lane routes.

How wide is the spray?

The rear bar spans 10-18 m and the front flush 8-16 m; both are adjustable, and the bar height sits 300-800 mm above ground for wind drift.

Is the tank thick enough for daily use?

Above 12,000 L the shell is 6 mm Q235B or Q345B with heads one gauge thicker, a 120-micron epoxy lining and baffles every 1.5-2 m.

Can it work a section with no hydrant?

Yes. Suction lift of 6-8 m through a 3-5 m hose lets the pump draw from canal, pond, well or reservoir; a hydrant inlet and outlet are also fitted.

What is the gradeability and turning circle?

Gradeability is 25-30 percent and the minimum turning diameter is 15-19 m across the range; ground clearance is 240 mm.

Which documents come with the shipment?

Invoice, packing list, bill of lading, certificate of origin, insurance and tank test report are prepared together, under FOB, CIF or DAP terms.

Inquiry Information

Check the 8x4 against your carriageway width

Tell us the lane width, section length, water source and daily area. We confirm tank volume, bar width, axle ratings and pump flow before the order is placed.

Email: info@elorry-ind.com | WhatsApp: +86-16638078903 | Tel: +86-13083602803

Henan Elorry Industrial Co., LTD. - Zhengzhou, Henan, China | www.elorry-ind.com

Image Filename and Alt Suggestions

Rear sprinkler bar spanning the full width of the 8x4 sprinkler truck
water-sprinkler-truck-8x4-full-width-bar.png - full width rear sprinkler bar in working position
Eight by four sprinkler truck cab and large volume tank body
water-sprinkler-truck-8x4-tank-body.png - cab and large volume tank body of the 8x4 build