{{ variable.name }}
On-board screw airend with altitude oxygen compensation intake port, -40 C to +50 C design and oil carry-over of 3 ppm or less.
Plateau rail and coach oxygen-generation systems need a compressed air source that keeps working when the air is thin and the day-to-night temperature swing is large. This on-board screw air compressor is configured with an altitude oxygen compensation intake port and is designed for -40 C to +50 C, with oil carry-over of 3 ppm or less so that downstream dryers, precision filters and oxygen or nitrogen generators receive clean, water-free air. The 9-in-1 architecture keeps the screw airend, oil-gas separator tank with built-in coarse separator, three filters and four valves in one package of 410 x 330 x 310 mm and 45 kg for underframe installation. Free air delivery is 0.25-0.4 m3/min at 7 bar and maximum working pressure is 12.5 bar, with noise held to 75 dB(A) or lower.
Part of the plateau configuration that sustained stable pressure and delivery at altitudes up to 5,000 m in the referenced rail project.
Covers the large day and night temperature difference of high-altitude operation.
Standard specification is below 2 ppm with a design limit of 3 ppm, keeping air clean for oxygen and nitrogen generation.
Airend, separator tank, three filters and four valves in one body reduce piping runs and leak points on rail vehicles.
Compact envelope suits underframe and equipment-cabinet installation on locomotives and coaches.
Supports passenger-area and crew-cab noise requirements on rail vehicles.
| Power | 2.2-4 kW |
|---|---|
| Speed | 3500 rpm |
| Free air delivery at 7 bar | 0.25-0.4 m3/min |
| Working pressure | Maximum 12.5 bar / minimum 5 bar |
| Maximum discharge temperature | 105 C |
| Oil carry-over | Below 2 ppm standard (design limit 3 ppm); 3 ppm or less for the plateau configuration |
| Noise | 75 dB(A) or lower |
| Net weight | 45 kg |
| Dimensions (L x W x H, excl. air filter assembly) | 410 x 330 x 310 mm |
| Altitude configuration | Altitude oxygen compensation intake port, operation up to 5,000 m; -40 C to +50 C design |
| Configuration | 9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters + 4 valves |
| Motor options | 24 V DC / 540 V DC |
| Housing material | High-grade cast iron (aluminium-alloy housing under development) |
The main use is clean, water-free compressed air for on-board oxygen and nitrogen generation in plateau locomotive and coach oxygen-enrichment systems, working together with an oxygen or nitrogen generator, air dryer and precision filter. The altitude configuration is also relevant to high-altitude mining engineering vehicles, rail auxiliary air supply, and new energy commercial vehicles operating on plateau routes.
The altitude configuration is specified against project altitude, air dryer and generator requirements, with motor voltage selected per vehicle platform (24 V DC or 540 V DC). For retrofit and aftermarket programmes, the unit is dimensioned for drop-in replacement of existing airends; the contractor referenced below reports CE-compliant supply and a purchase cost 25-30% lower than comparable European airends of equivalent performance.
300 units over two years supplying clean, water-free compressed air for on-board oxygen and nitrogen generation, with normal operation at altitudes up to 5,000 m and stable pressure and delivery. The highlight of the configuration: altitude oxygen compensation intake port, -40 C to +50 C design and oil carry-over of 3 ppm or less.
A second reference is the project contractor for the same programme, with approximately 300 units shipped cumulatively over two years for aftermarket replacement and vehicle air system retrofit. Reported results: CE-compliant supply at a purchase cost 25-30% lower than comparable European airends with equivalent performance, drop-in replacement dimensions, and a 4-5 week lead time against 8-10 weeks for imported units.
Up to 5,000 m, as demonstrated in the plateau locomotive and coach oxygen supply project.
The plateau configuration is designed for -40 C to +50 C, covering the large day and night temperature difference at altitude.
Oil carry-over is below 2 ppm to standard specification with a design limit of 3 ppm, and 3 ppm or less for the plateau configuration, together with the air dryer and precision filter in the system.
Oxygen or nitrogen generator, air dryer and precision filter, with continuous duty during plateau operation.
Yes. The retrofit programme referenced above used drop-in replacement dimensions with a 4-5 week lead time, against 8-10 weeks for imported units.
Rail transit product certification for air supply units on locomotives, EMU, metro and freight trains, plus CE under TUV Rheinland (CE-WSD-GCU-2023-001), IATF 16949 and ISO 9001:2015 by SGS.
2.2-4 kW, 3500 rpm, free air delivery of 0.25-0.4 m3/min at 7 bar, minimum 5 bar and maximum 12.5 bar working pressure, maximum discharge temperature 105 C.
Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Share the project altitude, generator or dryer specification and the existing mounting dimensions so the plateau configuration can be confirmed.