{{ variable.name }}

The ELORRY 4x2 light tipper truck covers 3,500 kg, 7,500 kg and 12,000 kg GVW classes for tight streets, urban works and light construction haulage. Body volume is about 2-6 m³. The steel tipping body uses Q235 or Q345 structural steel, a reinforced front wall and a 12-25 s tipping cycle. A gearbox PTO with in-cab control drives the tipping pump. For export, 4x2 units can ship in a 40-foot container with the body removed or knocked down. Larger tippers ship by flat rack, RoRo or bulk vessel.
3,500 / 7,500 / 12,000 kg GVW classes and 4x2 drive let buyers match local axle-load and licence rules instead of running an oversized truck.
About 2-6 m³ body volume suits sand, gravel, spoil and light construction loads where access is tight and trips are short.
A 45-55° tip angle, 12-25 s lifting time and in-cab PTO control keep the truck working through the day instead of waiting on manual handling.
Q235 or Q345 steel, 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall handle rubble and general site material; wear-resistant plate is optional.
4x2 units can ship in a 40-foot container with the body removed or knocked down, and mixed body types and GVW classes can be consolidated in one shipment.
| Item | Specification |
|---|---|
| GVW classes | 3,500 / 7,500 / 12,000 kg |
| Drive | 4x2 |
| Body volume | About 2-6 m³ |
| Body internal size range | L 2,400-7,600 mm × W 1,800-2,450 mm × D 400-1,400 mm |
| Tipping angle | 45-55° |
| Lifting / lowering time | 12-25 s / 10-20 s |
| Working pressure | 160-200 bar |
| Engine | Diesel 4 or 6 cylinders, 2.8-9.5 L, 130-400 hp |
| Emission | Euro II, III, IV or V; Euro VI on request |
| Transmission | 6-12 forward speeds, 1-2 reverse, manual; AMT optional |
| Tipping control | Gearbox PTO driving the tipping pump, in-cab control |
| Brakes | Dual-circuit air brake, ABS, engine exhaust brake; retarder optional |
| Steering | Hydraulic power steering; left-hand or right-hand drive |
| Tires | 195/75R16 to 12R22.5, tubeless standard |
| Fuel tank | 80-400 L |
| Maximum speed | 80-100 km/h; speed limiter available |
| Minimum turning radius | 5.5-9.5 m |
| Working temperature | -20 to 45°C with cold-start and tropical packages |
| Warranty | 12 months for major components with spare-parts support |
| Lead time | About 30 days for orders under 20 units; stock models ship faster |
| Configuration | Options |
|---|---|
| GVW classes | 3,500 / 7,500 / 12,000 kg |
| Drive | 4x2 |
| Body volume | About 2-6 m³ |
| Body styles | Steel, aluminum, triple-drop-side, three-way, tool carrier |
| Cab | 2-3 persons, day cab standard, sleeper cab optional |
| Emission | Euro II, III, IV or V; Euro VI on request |
| Steering | Left-hand or right-hand drive |
| Load cover | Manual roll-over sheet or electric tarpaulin system |
The tipping body uses Q235 or Q345 high-strength structural steel, with a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall. Cross bearers support the floor, and wear-resistant plate is optional for rubble and rock. The subframe is bolted and rubber-mounted to the chassis rails to spread tipping loads. The chassis is a carbon structural steel ladder frame with reinforced cross members. The cab is a welded steel body with tempered glass and anti-corrosion coating. Hydraulics use a hard-chrome-plated telescopic cylinder, high-pressure hose and steel pipe. The tailgate can be top-hinged or pendulum type with manual or automatic release. The load cover can be PVC tarpaulin or aluminum roll-over slats.

Rigid tippers cover 3,500 / 7,500 / 12,000 / 18,000 / 26,000 / 32,000 kg. The 4x2 light class uses 3,500 / 7,500 / 12,000 kg.
The 4x2 class is about 2-6 m³. The full rigid range is 2-22 m³, with 6x4 about 8-16 m³ and 8x4 about 16-22 m³.
Yes. 4x2 units can ship in a 40-foot container with the body removed or knocked down. Larger tippers ship by flat rack, RoRo or bulk vessel.
Lifting takes 12-25 s, lowering 10-20 s, with a 45-55° tip angle and 160-200 bar working pressure.
Diesel 4 or 6 cylinder engines, 2.8-9.5 L, 130-400 hp, with Euro II, III, IV or V; Euro VI on request.
12 months for major components with spare-parts support. Lead time is about 30 days for orders under 20 units; stock models ship faster.
Yes. Sales engineers compare material density, site access, tip height, bridge and axle limits and the local registration class, then recommend GVW, body volume and tipping direction.
Share your material density, site access, tip height, bridge and axle limits, and local registration class. ELORRY sales engineers will recommend the GVW, body volume and tipping direction for your route.
Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China