{{ variable.name }}
The heavy end of the ZLQ-03 ladder: resistance up to 230LB in widths up to 82.5mm, on a 2080mm latex loop built for assisted pull-ups, squats and power sets.
This configuration of the ZLQ-03 pull up band sits at the top of the resistance ladder, reaching 230LB in the widest 82.5mm bands. The loop is 2080mm long with a 0.45mm latex wall, so it anchors on bars and heavy handles without stacking several light bands. It is aimed at gym floors, outdoor training rigs and assisted pull-up stations where the band takes repeated high tension, and it carries the same ROHS and REACH test report used for EU supply of gym power pull-up assistance loop bands.



| Model | ZLQ-03 |
| Product type | Heavy grade continuous loop pull up band |
| Material | Latex |
| Resistance level | Up to 230LB (range 8LB – 230LB) |
| Width | Up to 82.5mm (range 6.4mm – 82.5mm) |
| Thickness | 0.45mm |
| Length | 2080mm |
| Service life | ≥20,000 stretches |
| Compliance | ROHS and REACH test report, Bureau Veritas No. (9025)314-0099, issued 2025-11-25 |
| Working environment | Indoor, -10°C to 50°C, dry and low-dust |
| Surface option | Anti-rolling surface treatment engineered in brand programme |
Heavy grades sit at the top of the same 8LB – 230LB range and use the widest bands, up to 82.5mm. Buyers normally order a heavy grade alongside the lighter loops in the same family so a gym or retail set can step from warm-up tension to full assistance. Grade-to-color assignment is configured at order stage, and bands are commonly paired with yoga mats, fitness handles, ankle straps and storage bags.
The band is a closed latex loop with a uniform 0.45mm wall and no glued joint, so repeated high tension does not work a seam open. Latex is the specified material; pigment, surface finish and printing are set per order. Where the anti-rolling surface treatment is specified, the band face resists curling so it stays flat against the bar and the body under load.
Precision silk-screen logo printing, customized packaging systems and anti-counterfeiting tracking are available on heavy-grade orders, matching the supply chain solution delivered for the fitness brand programme below. Resistance level, band width, grade color and packaging artwork are confirmed per order with our engineering team.
An international fitness brand in Australia sources an annual volume exceeding 150,000 units across 12+ specialized product lines, with bands running 3 – 5 years under normal use. For that programme a proprietary latex formula was developed with a five-tier resistance system (Ultra Light to Ultimate) held to a tension error margin within ±2%, using 100% premium Malaysian natural latex with food-grade pigments compliant with REACH, RoHS and Australian safety standards. The anti-rolling surface treatment was engineered in the same programme to stop bands curling or pinching during high-load exercise. Reported results include a defect and complaint rate below 0.05% and a 20% shorter R&D-to-market cycle.
What is the maximum resistance available?
The ZLQ-03 range reaches 230LB at the heavy end.
How wide is the heaviest band?
Widths run from 6.4mm to 82.5mm, with the heaviest grade using the widest band face at a 0.45mm wall.
Will one loop fit my pull-up bar setup?
The standard loop is 2080mm and is used with pull-up bars, door anchors, fitness handles and ankle straps.
How often will a gym need to replace bands?
Quoted service life is at least 20,000 stretches; the brand programme below reports 3 – 5 years of normal use.
Is the heavy band certified for EU buyers?
Yes. Bureau Veritas ROHS and REACH test report No. (9025)314-0099 covers gym power pull-up assistance loop bands.
Can the band be ordered with the anti-rolling finish?
The anti-rolling surface treatment was engineered in our brand programme and can be discussed when you configure the order.
Tell us the grade, width and quantity you need for your gym or distribution programme and we will reply with a quotation. Contact: Jacob | Email: public@libenli.cn | Tel and WhatsApp: +86 13864846995 | Zhengyang Middle Road, Yantai, Shandong, China. Supplier: Haiyang Libenli Body-Building Apparatus Co., Ltd., founded 1997, 50,000 m² plant, 300 employees, 20 engineers, 2 dedicated latex band lines at 25,000 meters per day, website www.latextubing.com.