menú

20.3m Self-Propelled Telescopic Boom Aerial Platform with 15.09m Reach

en stock:
SKU: 5144719538
modelo: Aerial Platform Truck

{{ variable.name }}

{{ value.name }}
Product Listing Title20.3m Self-Propelled Telescopic Boom Aerial Platform with 15.09m Reach
SEO Title20.3m Self-Propelled Telescopic Boom Lift with 15.09m Horizontal Reach
Meta DescriptionReview the 20.3m self-propelled telescopic boom lift with 15.09m horizontal reach, 230kg basket, 160-degree platform rotation and 45 percent gradeability.
URL Slugself-propelled-telescopic-boom-lift-20-3m

20.3m Self-Propelled Telescopic Boom Aerial Platform with 15.09m Reach

The self-propelled telescopic boom reaches 20.3 m working height and 15.09 m horizontal extension. Its 230 kg basket carries two persons, the turntable gives 360 degrees continuous slew, and the platform rotates 160 degrees so the operator can face the work. It climbs a 45 percent grade and turns in a 2.4 m inside radius for yard and site work where a truck-mounted unit cannot set outriggers.

ELORRY self-propelled telescopic boom aerial platform with raised boom
Self-propelled telescopic boom with 20.3 m working height and 15.09 m horizontal extension.
Telescopic boom and basket on the self-propelled aerial platform
Basket and boom section detail on the telescopic unit.

Product Summary

This unit is the self-propelled telescopic boom in the Elorry access fleet. The quoted 20.3 m working height corresponds to an 18.3 m platform floor height, and both figures are stated so buyers compare the same measurement. The 0.91 x 2.43 m basket is rated 230 kg for two persons. Drive speed is 6.8 km/h stowed and 0.8 km/h elevated, with 360 degrees continuous slew and 160 degrees platform rotation.

It is intended for rough ground and sites where a truck-mounted unit cannot set its outriggers. Dual control boxes are fitted at ground and basket, each with emergency stop and basket priority; a manual pump gives emergency descent.

Key Features

  • 20.3 m working height and 18.3 m platform floor height: both measurements are quoted so height is compared on the same basis.
  • 15.09 m horizontal extension with 230 kg basket load: the 0.91 x 2.43 m basket carries two persons plus tools.
  • 360 degrees continuous slew and 160 degrees platform rotation: the operator can turn the turntable and face the work without repositioning the base.
  • 45 percent gradeability with 6.8 km/h stowed speed: it moves on rough ground and yard surfaces, then slows to 0.8 km/h when elevated.
  • Dual controls with basket priority: ground and basket control boxes each have emergency stop, and a manual pump supports emergency descent.

Technical Specifications

Max working height20.3 m
Platform floor height18.3 m
Max horizontal extension15.09 m
Platform rated load230 kg, 2 persons
Basket size0.91 x 2.43 m
Rotation360 degrees continuous slew
Platform rotation160 degrees
Drive speed6.8 km/h stowed and 0.8 km/h elevated
Gradeability45 percent
Turning radius2.4 m inside and 5.13 m outside
ControlsGround and basket control boxes, emergency stop, basket priority
Safety systemsAnti-drop protection on rotation, harness anchor points, emergency lowering valve and manual pump

Models and Options

The quoted configuration is the self-propelled telescopic boom with 360 degrees continuous slew, 160 degrees platform rotation and a 230 kg basket. Where the basket must pass a roof edge, billboard or tree crown, an articulated knuckle boom is quoted instead of the straight telescopic boom. A 14 m 4x2 truck-mounted unit and a 15.7 m electric scissor lift can be ordered in the same fleet to share one spare-parts list.

Materials and Structure

The boom uses welded high-strength steel box section in Q345 and Q460 plate with reinforcement at pivot and hinge points. The turntable and base frame are Q345 steel plate with a machined slew ring and hardened pinions. The basket has a steel or aluminium checker plate floor, 1.1 m guardrails with mid-rail and toe board, and an anti-slip pattern plate with drainage holes. Hydraulic cylinders use honed steel tubes and hard-chrome plated piston rods; hoses are two-wire braided rubber with crimped fittings.

Applications

This self-propelled telescopic boom is used on rough ground, yards and sites without a truck. Typical work includes construction, telecom and lighting maintenance, signage, tree care, facilities maintenance, facade inspection and overhead work where the base can be driven close to the task. It is also used where a truck-mounted unit cannot set outriggers.

Customization

The order is configured around the 20.3 m working height, 15.09 m horizontal extension, 230 kg basket and 160 degrees platform rotation. A lifting hook, where specified, is rated 1,000 kg as a sling load and quoted apart from the basket load. Export documents are prepared in one set, and units ship by container, flat rack or RoRo under FOB, CIF or DAP terms.

Case Study

A facility maintenance contractor and power utility contractor in Kuwait ordered 3 units, 18-22 m working height, for street light maintenance, building facade work and overhead line service. After a typical project scale of 2 years in service, the units replaced scaffolding and shortened job time per site. The order specified telescopic or articulated boom options, platform auto-levelling, outrigger interlocks and emergency descent.

Frequently Asked Questions

What is the working height and platform floor height?

The unit has a 20.3 m working height and an 18.3 m platform floor height; both are quoted so buyers compare the same measurement.

What horizontal reach and load are quoted?

Maximum horizontal extension is 15.09 m, and the 0.91 x 2.43 m basket is rated 230 kg for two persons.

How does the platform rotate?

The turntable provides 360 degrees continuous slew, and the platform itself rotates 160 degrees.

What grade and speed can it handle?

Gradeability is 45 percent. Drive speed is 6.8 km/h stowed and 0.8 km/h elevated, with a 2.4 m inside turning radius.

Does it need a truck to move it?

No. It is self-propelled and specified for rough ground and sites where a truck-mounted unit cannot set outriggers.

What is the lead time?

Lead time is about 30-45 working days from down payment.

Inquiry Information

For configuration and export quotation, contact Henan Elorry Industrial Co., Ltd. Please state working height, horizontal reach, basket load and destination port.

Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com

Address: Zhengzhou City, Henan Province, China | Website: www.elorry-ind.com

Image Filename and Alt Suggestions

  • self-propelled-telescopic-boom-lift-tb203-15m-reach.png — Alt: ELORRY self-propelled telescopic boom lift with platform raised
  • self-propelled-telescopic-boom-lift-tb203-platform-rotation.png — Alt: Telescopic boom and rotating platform on the self-propelled lift
  • self-propelled-telescopic-boom-lift-tb203-rough-ground.png — Alt: Self-propelled boom lift positioned for rough-ground work