menú

16 Nm³/min Single-Stage Booster Air Compressor for Petrochemical Plants

en stock:
SKU: 5278546271
modelo: SLTPB-4.0/10-40、SLTPB-8.0/10-40、SLTPB-10/10-40、SLTPB-3.0/10-40、SLTPB-6.0/10-40、SLTPB-12/10-40、SLTPB-8.0/10-40、SLTPB-16/10-40

{{ variable.name }}

{{ value.name }}
  • SEO Title16 Nm³/min Single-Stage Booster Air Compressor for Petrochemical Plants
  • Meta DescriptionSLTPB-16/10-40 single-stage booster air compressor supplies 16 Nm³/min at 4.0 MPa for continuous petrochemical process air and high-flow gas boosting duty.
  • URL Slug/products/booster-air-compressor-sltpb-16-petrochemical

16 Nm³/min Single-Stage Booster Air Compressor for Petrochemical Plants

Product Summary

The SLTPB-16/10-40 is the largest capacity in Sollant's single-stage high-pressure booster series, delivering 16 Nm³/min at 4.0 MPa discharge from a 1.0 MPa inlet. In process plants it is placed after a screw or centrifugal compressor stage to top up a high-flow, high-pressure supply train, rather than to serve a single machine. This is the configuration used where a large process installation needs more high-pressure gas than the base compressor can provide on its own.

Petrochemical sites commonly involve high ambient temperatures, corrosive gas, flammable or explosive areas and outdoor installation. Operation is continuous, and the booster is normally matched with an air filter and air dryer upstream. Project specifications for this duty typically call for explosion-proof design, pressure stabilization and corrosion-resistant materials; confirm the exact execution required for your plant before ordering.

  • 16 Nm³/min
  • 1.0 MPa suction
  • 4.0 MPa discharge
  • Continuous duty
SLTPB-16/10-40 high-capacity booster air compressor module for process plants
SLTPB-16/10-40 high-capacity booster air compressor

Key Features

16 Nm³/min, Largest in Series

The top capacity of the 3.0 to 16 Nm³/min range, sized for plant-level high-pressure demand instead of a single consumer.

4.0 MPa From a 1.0 MPa Inlet

A single compression stage takes air already at 1.0 MPa up to 4.0 MPa, so the existing instrument air system stays as it is.

Building Block for a Supply Train

Paired with centrifugal or screw compressors, the booster completes a high-flow, high-pressure gas supply arrangement for large process installations.

Continuous Duty Construction

Cast iron, aluminium alloy and stainless steel internals support long-term, continuous operation with low maintenance cost.

Stable Discharge Pressure

A stable high-pressure supply supports pressure-sensitive process and instrument air consumers downstream.

Intelligent Control and Safety Protection

An intelligent control system with multiple safety protection features keeps the unit stable and safe during unattended running.

Technical Specifications

ParameterSLTPB-16/10-40
ModelSLTPB-16/10-40
Capacity16 Nm³/min
Suction pressure1.0 MPa
Discharge pressure4.0 MPa
Compression stage1
Speed710–790 rpm
Motor powerSeries ratings from 15 kW to 2×30 kW; the rating of this build is confirmed against the process duty
WeightSeries range 560–2100 kg; unit weight confirmed on order
MaterialsCast iron, aluminium alloy, stainless steel
OperationContinuous operation; upstream air filter and air dryer recommended

Models and Options

ModelCapacity (Nm³/min)SuctionDischarge
SLTPB-3.0/10-403.01.0 MPa4.0 MPa
SLTPB-4.0/10-404.01.0 MPa4.0 MPa
SLTPB-6.0/10-406.01.0 MPa4.0 MPa
SLTPB-8.0/10-408.01.0 MPa4.0 MPa
SLTPB-10/10-40101.0 MPa4.0 MPa
SLTPB-12/10-40121.0 MPa4.0 MPa
SLTPB-16/10-40161.0 MPa4.0 MPa

Flow is the only variable across the series: every model shares the /10-40 designation of 1.0 MPa inlet and 4.0 MPa discharge. Plants with several high-pressure consumers usually select 12 or 16 Nm³/min, or run two units in parallel. Published series motor ratings are 15 kW, 2×15 kW, 15+22 kW, 22 kW, 2×22 kW, 30 kW and 2×30 kW.

Materials and Structure

The frame and compression end are cast iron for rigidity and heat rejection, with aluminium alloy and stainless steel used in the flow path and trim. A single-stage layout limits the number of moving assemblies, which is what allows smooth running with minimal noise and vibration on a continuously operated skid. The compact footprint simplifies layout inside a crowded process area and keeps transport and commissioning straightforward.

Applications

Petrochemical process air and high-pressure gas supply are the primary duties, including high-flow, high-pressure boosting downstream of centrifugal or screw compressors. The 4.0 MPa platform is also used for PET bottle blowing, laser cutting and fire protection systems, and for drilling support work such as high-pressure gas injection, airtightness testing and deep-drilling assistance.

Customization

Sollant supports OEM/ODM customization on its compressed air equipment. Units are covered by an air compressor CE declaration of conformity (ECM, certificate 0P230209.SSE0Q23, valid until 8 February 2028, referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 1012-1:2010) and the company holds ISO 14001:2015 certification (NOA, 05126E00664R053). Original spare parts and 24/7 engineering after-sales support are available.

Explosion-proof execution is a project-specific requirement in petrochemical duty. The documentation supplied with this series does not list an explosion-proof certificate, so please state your hazardous-area classification and the documents required, and our engineers will confirm what can be supplied.

FAQ

What flow and pressure does the SLTPB-16/10-40 deliver?

16 Nm³/min at 4.0 MPa discharge from 1.0 MPa suction, single stage, running at 710–790 rpm.

Can it be combined with an existing centrifugal compressor?

Yes. High-pressure boosters are used downstream of centrifugal or screw compressors to complete a high-flow, high-pressure gas supply train for large process installations.

Is the unit available in explosion-proof execution?

Explosion-proof design is a common specification in petrochemical projects. The documentation provided here does not list an explosion-proof certificate, so send your hazardous-area classification and we will confirm the available execution.

Which materials suit corrosive process conditions?

The series material list covers cast iron, aluminium alloy and stainless steel. Stainless steel is used in the flow path and trim; share the gas composition and we will confirm the suitable material combination.

Does it need an air dryer upstream?

In petrochemical service the booster is normally matched with an air filter and air dryer, and the site requirement also calls for pressure stabilization. Confirm the treatment chain with our engineers when specifying the system.

Can it operate continuously?

Yes. Continuous operation is the standard duty for this series, supported by an intelligent control system and multiple safety protection features.

How much motor power and weight should I plan for?

Series ratings run from 15 kW to 2×30 kW with weights of 560 kg to 2100 kg. The exact figures for the 16 Nm³/min build are confirmed against the process duty at quotation.

Inquiry Information

Share your process parameters

Tell us the gas handled, inlet and required discharge pressure, flow, hazardous-area classification, ambient conditions and the upstream compressor type. Our engineers will confirm the model, materials and documentation package.

Image Filename and Alt Suggestions

Suggested file nameAlt text
booster-air-compressor-sltpb-16-petrochemical.pngSLTPB-16/10-40 high-capacity booster air compressor module for process plant installation
booster-air-compressor-sltpb-16-skid-layout.pngSkid layout and connections of the 16 Nm³/min booster air compressor