{{ variable.name }}

Integrated Assist Gas Air System
The 15 kW model sits within the SLTI 4 in 1 screw air compressor range. In laser cutting, compressed air can serve as an assist gas for metal fabrication. An integrated system can combine the compressor with air treatment components such as a dryer, filters, and an air receiver tank depending on configuration, supporting a compact installation close to the laser cutter.
This 15 kW 4 in 1 air compressor is intended for laser cutting and metal fabrication workshops that need an integrated compressed air supply for assist gas and shop air. The published series covers 7.5-22 kW, 10-30 hp, 0.63-3.6 m³/min for fixed speed and 0.28-3.6 m³/min for variable speed, with working pressure of 0.8-1.6 MPa and G3/4 or G1 outlet options. The integrated layout can include a receiver tank, dryer, filters, and controls depending on the chosen configuration. For laser cutting, the air treatment setup should be matched to the required air quality and cutting process.

| Item | Data |
|---|---|
| Model family | 15 kW model in the SLTI 4 in 1 range; fixed and variable speed options available |
| Power | 15 kW; series range 7.5-22 kW |
| Horsepower | 20 hp; series range 10-30 hp |
| Air displacement | Fixed speed series 0.63-3.6 m³/min; variable speed series 0.28-3.6 m³/min; model-specific value confirmed at selection |
| Working pressure | 0.8-1.6 MPa |
| Air outlet diameter | G3/4 or G1 |
| Lubricating oil volume | 10-20 L, series range |
| Noise level | 60-65±2 dB(A) |
| Driven method | Direct drive or belt drive for fixed speed; direct drive for variable speed |
| Weight | 370-900 kg, series range |
| Gas tank capacity | 285-800 L, series range |
Laser cutting air demand varies by material, thickness, and cutting head. Confirm the final model, air treatment, and outlet configuration against the laser cutter requirements.
For the 15 kW class, buyers can evaluate the fixed speed SLTI-15F or variable speed SLTI-15V within the 4 in 1 range. Configuration options can include an air receiver tank, dryer, filters, and control equipment. In laser cutting, the air treatment package should be selected according to the required pressure dew point, filtration grade, and air quality standard.
The compressor uses cast iron, stainless steel, and other listed materials. The integrated structure combines the compressor with auxiliary components in one system. Fixed speed models can use direct drive or belt drive, while the variable speed series is direct driven. The cabinet arrangement supports a compact installation near the laser cutting machine, with final connection details based on the selected system and site conditions.
This model is aimed at laser cutting and metal fabrication. Compressed air can be used as an assist gas to blow away dross, cool the cutting edge, and support the cutting process. The integrated system is also relevant to mechanical manufacturing workshops that use pneumatic tools, workpiece handling, and auxiliary compressed air functions. Selection should consider the laser cutter air demand and the required air quality.
Sollant supports OEM and ODM customization. Power rating, working pressure, air delivery, and auxiliary air treatment equipment can be reviewed against the laser cutting process. Connection requirements, commissioning procedures, and installation tasks vary by the selected system and on-site conditions.
A metal fabrication company in Brazil purchased one integrated screw compressor for laser cutting equipment in 2012. The unit has remained in stable, continuous service for over 13 years. The integrated design connects directly to the laser cutter and combines the compressor, air dryer, filters, and air receiver tank, eliminating complex external piping and enabling a plug-and-play setup. Reported results include space and installation cost savings, stable operation under high-frequency laser cutting, reduced operating noise, and compressed air used to help protect focusing lenses from smoke and dust. This case reflects the application described for that project; final configuration for other projects depends on the laser cutter and site requirements.
Compressed air can be used as an assist gas in certain laser cutting applications. The required air flow, pressure, and air quality should be checked against the laser cutter specifications.
Certain configurations can incorporate air drying and filtration equipment. The setup depends on the required pressure dew point, filtration grade, and air quality standard.
Both series are available in the 15 kW class. Fixed speed lists 0.63-3.6 m³/min and variable speed lists 0.28-3.6 m³/min. The choice depends on the actual air demand profile and workshop conditions.
G3/4 and G1 are listed for the series. The final outlet is confirmed with the selected model and configuration.
The integrated design is intended to reduce separate piping and simplify installation. The actual connection arrangement depends on the selected system and on-site conditions.
Sollant supports OEM and ODM customization. Share the laser cutter requirements so the team can review the air supply and treatment configuration.
Email: info@sollant.com
Tel: +86 155-8905-3798
WhatsApp: +86 155-8905-3798
Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.