menú

12.5 Bar Screw Compressor Airend for CAFS Fire Trucks and Braking

en stock:
SKU: 3026070971
modelo: GCU30G

{{ variable.name }}

{{ value.name }}
Model GCU30G · 12.5 bar configuration

12.5 Bar Screw Compressor Airend for CAFS Fire Trucks and Braking

A high-side pressure setting of the GCU30G integrated airend, delivered for compressed-air foam systems working at 8.6-12 bar and for heavy commercial vehicle braking circuits operating between 8 and 12 bar.

GCU30G 12.5 bar screw compressor airend set for fire truck foam systems

12.5 bar configuration of the GCU30G integrated airend

Product Summary

Some vehicle systems need headroom above the usual 7 bar duty point. Compressed-air foam fire trucks proportion foam between 8.6 and 12 bar, and heavy truck braking circuits run between 8 and 12 bar. This GCU30G build is set for a maximum working pressure of 12.5 bar, leaving a margin above both requirements while the unit still delivers 2.5-3.3 m³/min at the 7 bar reference point from an 18-22 kW input. Speed range is 2,900-6,000 rpm, maximum discharge temperature 105 °C, oil carry-over below 2 ppm (design 3 ppm) and noise 75 dB(A) or less. The nine-in-one layout - airend, oil-gas separator tank, three filters and four valves - keeps the high-pressure side compact, which matters on a fire body where locker space is already committed.

Key Features

  • 12.5 bar maximum working pressure. Pressure band of 5 to 12.5 bar covers CAFS foam proportioning at 8.6-12 bar and braking circuits at 8-12 bar with margin.
  • Fast air build-up for standby duty. The minimum pressure valve and integrated separator tank support rapid pressure recovery after long standby followed by full-load operation.
  • Compact footprint for bodywork. 96 kg and 560 x 490 x 580 mm, with no separate valve cabinet to find room for on the chassis.
  • Gearbox-integrated PTO drive. Engine-driven coupling from the power take-off, as used on fire and rescue chassis.
  • Low oil carry-over. Below 2 ppm (design 3 ppm) so downstream foam proportioning equipment and brake valves see clean air.
  • Proven compression side. Forged alloy steel rotors on the German-designed UV patented profile, SKF heavy-duty bearings and triple shaft sealing.

Technical Specifications

ModelGCU30G (12.5 bar configuration)
TypeIntegrated screw airend with gearbox; PTO / engine driven
Maximum working pressure12.5 bar (minimum 5 bar)
Rated power18-22 kW
Speed2,900-6,000 rpm
Free air delivery at 7 bar2.5-3.3 m³/min
Max discharge temperature105 °C
Oil carry-overBelow 2 ppm (design 3 ppm or less)
Noise level75 dB(A) or less
Net weight96 kg
Dimensions (L x W x H)560 x 490 x 580 mm, excluding air filter assembly
Integrated configuration9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves

Models and Options

  • Standard 7 bar reference build and this 12.5 bar maximum-pressure build of the same GCU30G platform.
  • Safety valve and minimum pressure valve set matched to the ordered pressure point.
  • Air filter optional for body builders who fit their own intake group.
  • Both conventional and 9-in-1 integrated architectures available from one source.

Materials and Structure

  • Housing: high-grade cast iron (aluminium-alloy housing under development) with the gearbox machined into the integrated body.
  • Rotors: forged alloy steel, German-designed UV patented profile, 20+ precision machining steps at micron-level accuracy.
  • Bearings and sealing: SKF heavy-duty rolling bearings and triple-sealing technology for the higher-pressure duty cycle.
  • Separation: built-in coarse separator in the oil-gas tank plus oversized external fine separator; four-valve group includes safety valve protection at the set pressure.
Valve group and separator tank on the 12.5 bar GCU30G airend for foam proportioning

Valve group and separator tank arranged for the 12.5 bar working range

Applications

CAFS fire and rescue vehicles

Compressed air supply for foam proportioning systems working at 8.6-12 bar, with fast air build-up after standby.

Heavy-duty commercial vehicles

Braking circuits running between 8 and 12 bar, plus clutch and gearbox assist and pneumatic horn.

Special vehicles

Engineering rescue trucks and municipal bodies needing a compact high-pressure air source.

Compressor packagers

Core compression unit for packages specified above the usual 7 bar duty point.

Customization

The pressure point is fixed at order, with the safety valve and minimum pressure valve matched to the application: foam proportioning at 8.6-12 bar, braking at 8-12 bar, or another point inside the 5-12.5 bar band. Body builders can specify the air filter as an option, and technical drawings with standardised mounting interfaces are issued for chassis integration. Altitude and wide-temperature adaptations are available on the same platform where the vehicle operates in extreme environments.

FAQ

What is the maximum pressure this build supports?

12.5 bar, with a 5 bar minimum. The 2.5-3.3 m³/min figure is stated at the 7 bar reference point, so confirm the expected delivery at your actual foam or brake pressure with our engineers.

Is it suitable for CAFS foam proportioning?

The 12.5 bar maximum sits above the 8.6-12 bar range used by compressed-air foam systems, and the compact nine-in-one layout leaves locker space free on the body.

How quickly does pressure build after standby?

The minimum pressure valve and integrated separator tank are specified to support fast air build-up for standby-then-full-load duty; the actual ramp time depends on the receiver volume of the vehicle system.

Does running at higher pressure change the drive arrangement?

No. The unit remains a gearbox-integrated airend for PTO and engine-driven systems, rated 18-22 kW with a 2,900-6,000 rpm speed range.

What certifications are available?

CE certificate CE-WSD-GCU-2023-001 issued by TUV Rheinland under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 for integrated airends from 2.2 to 45 kW, plus ISO 9001:2015 by SGS and IATF 16949 automotive quality management system certification.

Can the unit be serviced on the vehicle?

Yes. The three filters and four valves are grouped on the integrated assembly, so filter replacement and valve checks are carried out at one location rather than across separate manifolds.

Image Filenames and Alt Suggestions

  • gcu30g-12-5-bar-airend-cafs-set.png - GCU30G 12.5 bar screw compressor airend set for fire truck foam systems
  • gcu30g-12-5-bar-airend-valve-group.png - Valve group and separator tank on the 12.5 bar GCU30G airend for foam proportioning
  • gcu30g-12-5-bar-airend-chassis.png - GCU30G high-pressure airend positioned for chassis installation
  • gcu30g-12-5-bar-airend-ports.png - Pressure ports and connections on the GCU30G 12.5 bar build

Inquiry Information

Send the working pressure of your foam or brake system, the air volume needed at that pressure and the drive arrangement, and we will confirm the 12.5 bar configuration of the GCU30G.

Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp: +86 189 1237 9878 · Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China