menú

100 Ton Vertical Baler for Food and Pharma Packaging Waste

en stock:
SKU: 6766936789
modelo: NK080T100

{{ variable.name }}

{{ value.name }}
Plant Packaging Waste Baler

100 Ton Vertical Baler for Food and Pharma Packaging Waste

The NK080T100 is quoted as the compaction step in food, pharmaceutical, packaging and chemical plants, pressing production and packaging waste into 200-350 kg bales at 3-6 bales per hour.

Compaction and packaging project100 Ton press forceConveyor line integrationCarbon steel, 3.2 T
NK080T100 vertical baler used as a compaction step for plant packaging waste

Product Summary

Inside a manufacturing plant, packaging and production waste builds up faster than it is removed. This configuration of the NK080T100 is specified as part of a material compression and packaging project: cans, bottles, plastic packaging and similar production scrap are loaded through a 1000 x 500 mm feed opening into a 1000 x 800 x 1500 mm chamber, where a 100-ton hydraulic press forms bales of 1000 x 800 x 500-1000 mm weighing 200-350 kg. Rated output is 3-6 bales per hour from a 15 kW / 20 HP motor on 380 V / 50 Hz. The machine stands 1700 x 1400 x 3300 mm and weighs 3.2 T, fitting an indoor plant bay served by a stable three-phase supply.

The result is compacting and packaging in one step: waste leaves the production area as tied, stackable bales rather than loose material occupying floor space.

Key Features

Compaction step in a packaging lineThe baler is positioned as the compacting and packaging stage of an in-plant waste route, working with conveyors, wire rope and woven bags as matched equipment.
100-ton press forceProduces 200-350 kg bales, turning low-density packaging material into units that can be stacked and counted.
1000 x 800 x 1500 mm chamberA large chamber against a 1000 x 500 mm feed opening keeps loading continuous between press cycles in shift-based plant operation.
3-6 bales per hourHourly output is sized for plants that accumulate packaging waste across one or more production shifts.
15 kW / 20 HP at 380 V / 50 HzStandard three-phase drive with a footprint of 1700 x 1400 x 3300 mm and 3.2 T machine weight for an indoor installation.
Bale length 500-1000 mmBale height is adjustable within the 1000 x 800 mm footprint so bale weight suits your internal handling and dispatch routine.

Technical Specifications

ParameterValue
ModelNK080T100
Hydraulic power100 Ton
Packaging size (L x W x H)1000 x 800 x 500-1000 mm
Feed opening size (L x H)1000 x 500 mm
Chamber size (L x W x H)1000 x 800 x 1500 mm
Capability3-6 bale/h
Bale weight200-350 kg
Voltage380 V / 50 Hz
Power15 kW / 20 HP
Machine size (L x W x H)1700 x 1400 x 3300 mm
Machine weight3.2 T
MaterialCarbon steel

Models and Options

Model NK080T100 in 100-ton configuration is the specification covered here. Options recorded for this application are the surrounding line items rather than the press itself: conveyor line, wire rope, woven bag and baling wire or PET strapping for tying finished bales. Bale length remains adjustable from 500 mm to 1000 mm, which sets bale weight within the 200-350 kg band.

Materials and Structure

Frame, chamber and press structure are carbon steel, with a machine weight of 3.2 T holding the unit steady under 100-ton pressing force. Waste enters through the 1000 x 500 mm feed opening, is compressed vertically inside the 1000 x 800 x 1500 mm chamber and leaves as a 1000 x 800 x 500-1000 mm bale. Overall dimensions are 1700 x 1400 x 3300 mm, so the baler is placed in a plant bay with access for feeding and bale removal.

Applications and Working Conditions

The recorded application range covers food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling plants. For production-line installations the recorded working condition is a high-temperature environment, and the recorded operation mode for this line type is continuous automatic operation with a PLC-controlled cycle at 24/7 industrial duty, with low-noise, low-energy and efficiency requirements noted at project level.

Because line control architecture is project-specific, state your plant requirements during inquiry so the proposed configuration is checked against them before order confirmation.

Food production wastePharmaceutical packagingPackaging plantsChemical production wasteElectronics assembly wasteMetal working plants
Construction for this model is carbon steel, which suits dry packaging and production waste. Share your material specification so suitability for your plant is confirmed.

Customization

Plant baling solutions are confirmed against the material actually processed. Buyers are asked for material type, material dimensions, loose density, target bale weight or bale size, available floor space, power conditions, required automation level and required throughput before a model and solution are confirmed. Where the baler joins an existing waste route, the conveyor interface and bale tying method are agreed at the same stage.

FAQ

Which plants use this configuration?

Food, pharmaceutical, packaging, chemical, electronics, metal, waste treatment and recycling operations that need plant packaging waste compacted on site.

Can it be linked to a conveyor line?

Conveyor line, wire rope and woven bag are recorded as matched equipment for this application. Share your line layout so the interface is confirmed.

What bale weight can we expect?

Bales weigh 200-350 kg at 1000 x 800 x 500-1000 mm, depending on material density and the bale length selected.

What power supply does the baler need?

380 V / 50 Hz three-phase with a 15 kW / 20 HP motor. Confirm your plant supply during inquiry.

Is the baler suitable for continuous operation?

Rated output is 3-6 bales per hour. The recorded duty for this line type is 24/7 industrial operation, so state your shift pattern and required throughput so capacity is checked against it.

What is required to tie the bales?

Baling wire or PET strapping is used to tie finished bales before removal; jumbo bags and packing tools are available as matched equipment.

What should an inquiry include?

Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.

Inquiry Information

Shaanxi Nick Machinery Equipment Co., Ltd. Contact: Nick. Email: Sales@nkbaler.com. Tel / WhatsApp: +86 15021631102. Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China. Website: www.nkbaler.com.

Send your plant material details, line requirements and target bale weight so the NK080T100 configuration is confirmed for your site.

Image Filename and Alt Suggestions

FilenameAlt text
nk080t100-baler-food-pharma-packaging-01.jpgNK080T100 vertical baler compacting plant packaging waste
nk080t100-baler-food-pharma-packaging-02.jpgVertical baler NK080T100 in a production workshop
nk080t100-baler-food-pharma-packaging-03.jpg100-ton baler NK080T100 used in a plant waste line