Procurement FAQ: Pillow Block Insert Series, Bore and Grease
Procurement FAQ: Pillow Block Insert Series, Bore and Grease
Replacing a pillow block bearing is usually treated as a part-number exercise: read the marking on the failed insert, order the same number, fit it. In practice, most of the procurement risk sits one step earlier. A buyer who matches only the bore diameter can receive an insert that fits the shaft but not the housing, a locking arrangement that does not suit the maintenance routine, or a lubricant that is wrong for the operating temperature. The three variables that decide whether a replacement actually works are the insert series, the bore arrangement and the grease. Each is a selection criterion, not a catalogue preference.
LDK, the trading identity of Deyuan Smart Technology (Fujian) Co., Ltd, is a bearing manufacturer established in 1986 that produces pillow block bearings, rod end bearings and spherical plain bearings from a 90,000 m² facility with roughly 130 employees and an annual output of 15,000,000 units. Its published range covers insert bearing bore sizes from 10 mm to 140 mm and more than 100 combinations of insert material and housing type, which makes it a useful reference set for the questions below. The families named in this article — UC2, UC3, UCX, SA2, SB2, UK2, SSER, SUK2, SUC2 and the thermoplastic unit series — are used as worked examples of how a buyer should reason, not as a recommendation to switch suppliers.
What a replacement order actually has to specify
A replacement order has to settle four things, not one: the insert series and size, the bore arrangement, the housing interface, and the lubrication and sealing condition. Bore diameter is the only one of the four that is printed prominently on most housings, and it is the only one that a shaft measurement will confirm.
The housing interface is the most frequently missed item. A mounted unit is a matched assembly of an insert and a housing, and the insert's outer diameter, width and locking-collar space are set by the housing it was designed for. Two inserts with the same 25 mm bore can have different outer diameters. When that happens, the replacement will either not enter the housing spigot or will enter it with the wrong axial location, and the symptom appears later as vibration, seal wear or premature failure rather than as an obvious assembly error.
The lubrication condition is missed for a different reason: grease is usually treated as a commodity that comes with the bearing. It is not. A standard lithium-soap grease and a grease selected for a cold-store conveyor at low temperature are not interchangeable, and neither is a food-grade solid lubricant interchangeable with a greased insert. The supplied case record for a cold-storage conveyor, for example, specifies a customized insert with special grease for operation in a −50 °C environment, which is a lubrication decision rather than a bearing-size decision.
Insert series matching: UC2, UC3, UCX, SA2, SB2 and UK2
The insert series is the first decision because it fixes the geometry that everything else depends on. The supplied product data separates six families into distinct model ranges, and those ranges are the practical starting point for a replacement check.
| Series | Supplied model range | Role in the range (naming convention) |
|---|---|---|
| UC2 | UC201 to UC215 | Standard-width insert used across a broad set of pillow, flange and take-up housings |
| UC3 | UC305 to UC328 | Heavier family, extending to larger shaft sizes |
| UCX | UCX05 to UCX17 | Intermediate family between the UC2 and UC3 sizes |
| UK2 | UK205 to UK218 | Taper-bore insert intended for adapter-sleeve mounting |
| SA2 | SA201 to SA212 | Separate locking family, not interchangeable with UC2 by size alone |
| SB2 | SB201 to SB212 | Alternative locking family with its own dimensional envelope |
The practical rule is to start from the marking on the failed insert and then confirm three dimensions: bore, outer diameter and width. A UC3 insert for a given shaft size is dimensionally larger than the UC2 equivalent, so a buyer who upgrades from UC2 to UC3 for extra capacity cannot assume the existing housing will accept it. The same caution applies in reverse: a UC2 insert dropped into a housing built for the heavier family may seat but sit loose axially, which changes the load path through the housing.
SA2 and SB2 deserve separate attention because they are often ordered by bore size on the assumption that they are UC2 variants. The supplied data catalogues SA201–SA212 and SB201–SB212 as their own families, with their own locking and inner-ring design. A replacement should therefore be checked against the original locking method and inner-ring geometry, not only against the shaft diameter. Where the failed part carries a suffix that does not match the standard listing, the safest procurement action is to photograph the marking and the locking collar and send both with the enquiry.
Bore type: round bore, square bore and adapter sleeve mounting
Bore type answers a different question from insert series: it describes how the insert grips the shaft. Round bore, square bore and adapter-sleeve mounting are three distinct answers, and the correct one is determined by the shaft, not by the housing.
Round bore is the default for general conveying, fans and process machinery. The shaft passes directly through the insert and is gripped by the locking device. The supplied agricultural range illustrates how far this extends: round-bore farm implement bearings are listed under designations such as 205PPB7, W208PPB7, W208PP10 and W209PPB2, all of which mount on a round shaft.
Square bore appears where the shaft itself is square, which is common on tillage equipment and disc harrows. The supplied data lists square-bore agricultural bearings under designations such as 205NPPB AH02, 206NPPB AH04, 207NPPB AH09 and 207KPPB3, and a separate disc harrow family under ST491A, ST491B, DHU45R-209 and DHU55R-211. A square bore is not a round bore with a different tolerance; the insert is keyed to the shaft profile, and substituting a round-bore unit removes the drive engagement the machine depends on.
Adapter sleeve mounting is the third route. In this arrangement the insert has a tapered bore and is drawn onto a split sleeve that grips the shaft. The supplied data shows the pairing explicitly: UK-series housed units are listed with H-series sleeves, for example UKP205+H2305, UKT206+H2306 and UKFL207+H2307, and the adapter sleeve range itself runs from H204 through the H2300 and H3000 series. The attraction is installation tolerance: the sleeve allows the bearing to be positioned axially on a shaft that has no shoulder and no machined abutment, and it avoids the shaft damage that setscrews can cause. The trade-off is an extra component and an extra step. A sleeve-mounted unit needs the correct sleeve, nut and locking washer, and the sleeve must match the insert's taper, so a replacement order that names only the housing or only the insert is incomplete.
The selection criteria for a buyer are therefore: shaft profile (round or square), shaft condition (machined shoulder or plain shaft), removal frequency, and the tolerance for shaft marking. Setscrew locking on a round shaft is quick but marks the shaft; adapter sleeve mounting is slower to fit but kinder to the shaft and easier to reposition.
Material route: stainless inserts and thermoplastic bearing units
Material selection should be driven by the environment the unit actually sees, not by the general reputation of stainless steel. The supplied range separates the corrosion-resistant route into stainless inserts and thermoplastic housed units, and each has a different fit boundary.
On the stainless side, the catalogue lists SSER inserts from SSER201 to SSER212, SUK2 inserts from SUK205 to SUK212, and SUC2 inserts from SUC201 to SUC212, alongside SNA2, SSA2, SSB2, SUE2 and SUER2 families and a full set of all-stainless mounted units. These are the families a buyer should compare when the application involves washdown, food and beverage processing, or chemical exposure. The important qualification is that stainless describes the material family, not a performance guarantee. The supplied data does not state a steel grade for each insert, so a buyer who needs a specific grade should request it as a document rather than infer it from the prefix.
On the polymer side, the thermoplastic unit families include TP-SUCP, TP-SUCF, TP-SUCFL, TP-SUEP, TP-SUET, TP-SUCPA and the closed-back and flanged variants. The supplied product notes describe these waterproof plastic bearing units as able to be mounted with 440 or 420 insert bearings, interchangeable with major known brands, and available with a customized housing colour subject to a minimum order quantity. That combination matters in washdown environments where a cast iron housing would corrode: one supplied case record covers a sorting machinery OEM that took 110,000 plastic units specifically for frequent washdowns, harsh chemicals and high humidity.
Food contact is a separate question from corrosion, and it is worth separating the documents. A TÜV Rheinland test report numbered 168263398a 001, issued 7 May 2020 and valid to 7 May 2030, covers thermoplastic bearing housings against the U.S. FDA code of federal regulations title 21. That report addresses the housing material. It does not automatically qualify the insert, the seal or the lubricant, so a food-processing buyer still needs the insert and lubricant declaration separately. The supplied ice-machine case is instructive here: the contamination concern was addressed with food-grade solid lubricant rather than with a greased insert, which removes the occasional grease-to-food contact path entirely.
The limitation to record is load. The supplied data gives model ranges and material descriptions, but it does not give static or dynamic load ratings for the plastic families or the stainless inserts. Any substitution from cast iron to polymer, or from standard to stainless, should be checked against the application's load and speed envelope using the supplier's datasheet before the order is placed.
Grease: when a custom insert is the correct answer
A custom insert with special grease is justified when the operating condition falls outside the range a standard grease can hold, not when a buyer wants a higher specification on paper. The supplied range includes a dedicated family for this purpose — Customized Bearing Inserts Special Grease — and the case record that shows the logic is the cold-storage installation, where 5,000 units were supplied for a low-temperature conveyor specified to work in a −50 °C environment.
That case is a useful template for three questions. First, is the temperature at the bearing, rather than the room temperature, outside the standard grease window? Cold-store conveyors, blast freezers and outdoor equipment in winter all qualify. Second, is there a contamination path that standard grease makes worse, such as a food line where lubricant migration is a hazard? The ice-machine case answered that with solid lubricant rather than with a different grease. Third, is relubrication practical? A unit that cannot be reached for routine greasing needs a fill-for-life approach, and that is a design decision that has to be made with the supplier rather than at the parts counter.
Two cautions apply. A special grease is not automatically superior: grease choice interacts with speed, load and relubrication interval, and the supplied data does not state those limits for each fill, so they should be confirmed in writing. And a customised insert lengthens the supply chain. The general capability data for OEM production lists an MOQ of 5K units, lead times of 30 to 90 days and a monthly capacity of 300K units, which means a custom grease specification should be planned as a programme rather than as an emergency purchase.
Deep groove bearings and insert selection
A mounted ball bearing insert is built around a deep groove ball bearing, and the insert designation adds the housing fit, the locking arrangement and the sealing to that core. That relationship explains why the two are catalogued separately and why they are not substitutes for one another.
The supplied range lists deep groove bearings as their own family, running from miniature sizes such as S686 and S696 through the 6000, 6200 and 6300 series to S6310. A buyer specifying a deep groove bearing is buying a bearing to fit into a housing that already exists or is being designed. A buyer specifying an insert is buying the complete interface: bearing, locking, seal and housing fit. Choosing between them is therefore a question of what is being replaced. If the housing is sound and only the rotating element has failed, an insert is the shorter route. If the housing is being designed or the shaft arrangement is being changed, the deep groove bearing and the housing become separate engineering decisions.
The practical link is the fit. Installing a deep groove bearing into a worn housing, or reusing a housing whose spigot has been damaged during a previous removal, will reproduce the failure regardless of how good the new bearing is. That is why the housing interface belongs on the inspection sheet next to the bearing part number.
A verification sequence before the purchase order
A repeatable check sheet is more useful than a longer specification. The sequence below follows the order in which the information is normally available on site.
| Check | What to record | Why it decides fit |
|---|---|---|
| Insert marking | Full designation including any suffix, plus a photograph of the locking collar | Identifies series and locking family; suffixes often carry the only distinguishing information |
| Shaft | Diameter, profile (round or square), condition and tolerance | Determines bore type and whether an adapter sleeve is needed |
| Housing | Spigot diameter, width, bolt-hole pattern, material and condition | Confirms the insert outer diameter and rules out a series upgrade that will not seat |
| Environment | Washdown, chemicals, humidity, temperature range, food contact | Drives the stainless or thermoplastic route and the seal specification |
| Lubrication | Grease type, relubrication access, temperature at the bearing | Determines whether a standard fill is adequate or a custom insert is required |
| Documentation | RoHS scope, food-contact report, quality system certificate and validity dates | Shows whether the specific model, not just the brand, is covered |
On the documentation row, scope matters more than the existence of a certificate. The SGS RoHS verification report numbered XMNEC25002179201_1, issued 22 September 2025 and valid to 22 September 2035, declares a scope that lists UC200, UC300, UCX00, UK200 and SER200 insert designations together with a long list of UCP, UCF, UCFL, UCT, UCFC and related housing assemblies. A buyer who needs RoHS evidence for a specific model should check that the model appears in the declared scope rather than accept a generic statement. The same discipline applies to the quality system: the IATF 16949 certificate issued 26 January 2024 and valid to 25 January 2027 covers the manufacture of bearings and bearing housings, which is the relevant scope for a mounted unit.
Commercial terms belong on the same sheet, because they constrain the technical choice. The OEM capability data for this range lists an MOQ of 5K units and lead times of 30 to 90 days against a monthly capacity of 300K units, with a stated on-time delivery performance of at least 95 percent. The procurement support data describes flexible scheduling that allows low-volume long-tail items to move with high-volume commodities, an MOQ as low as one piece for specialised long-tail items for strategic accounts, Incoterms from FOB and CIF through DDP and DDU, and vendor-managed inventory buffers with a 24 to 48 hour regional response for major OEM accounts. Payment terms such as usance L/C or open account at 30 to 60 days are described as optional and settled case by case. None of these terms should be assumed; they are the questions to put in the enquiry.
Fit boundaries: what the data does not answer
An honest procurement FAQ has to say where the catalogue stops. The supplied material gives model ranges, materials, housing types, certification scope and case outcomes, but it does not give load ratings, speed limits, internal clearance classes or the NLGI grade of each standard fill. Those four items are the ones most likely to decide a marginal application, and they should be requested as datasheet values before a substitution is approved.
The case records also need to be read as case records. The offshore processing project, which supplied 70,000 units against a requirement for 500 hours of rust-free performance and RoHS and REACH compliance, describes one set of conditions. The food processing OEM that reported a 30 percent reduction in equipment ownership and maintenance cost describes another. Neither establishes that the same result will appear on a different line with a different duty cycle, and treating them as a general performance promise would be a procurement error rather than a supplier claim.
Frequently asked questions
How do I match a replacement insert to an existing pillow block housing?
Match three dimensions before ordering: bore, insert outer diameter and insert width. Read the full designation from the failed insert, including any suffix, and compare it with the housing spigot diameter and width. A series change of the same bore size, such as moving from UC2 to UC3, alters the insert envelope and should be treated as a housing change until the dimensions confirm otherwise.
When should I choose a square bore instead of a round bore?
Choose square bore when the shaft itself is square, which is typical of tillage and disc harrow equipment where the insert must engage the shaft profile to transmit drive. The supplied agricultural range lists square-bore bearings such as 205NPPB AH02 and 207KPPB3 alongside separate disc harrow bearings. If the shaft is round, a square-bore unit will not mount correctly, and a round-bore substitute will remove the drive engagement.
Is a stainless insert always the right choice for washdown?
No. Stainless inserts such as SSER, SUK2 and SUC2 address corrosion of the insert, but the housing, seal and lubricant also determine whether a washdown unit survives. Thermoplastic housed units, including the TP-SUCP, TP-SUCF and TP-SUCFL families, are an alternative where the housing is the corrosion risk, and the supplied data notes that they can be mounted with 440 or 420 insert bearings. The correct choice depends on which component is failing and on the load the application imposes.
When is a custom insert with special grease justified?
It is justified when the operating condition falls outside a standard grease fill: very low temperature, as in the supplied −50 °C cold-storage conveyor case using 5,000 customized inserts, a contamination path where standard grease creates a hazard, or a location that cannot be relubricated. Because a custom fill is a programme rather than a stock item, plan it against the stated 5K unit MOQ and 30 to 90 day lead time rather than treating it as an urgent replacement.
Does the insert series affect which deep groove bearing is used?
Yes, indirectly. A mounted ball bearing insert is built around a deep groove ball bearing, and the insert designation adds the housing fit, locking arrangement and sealing around that core. The supplied range therefore lists deep groove bearings as a separate family, from S686 through S6310, for applications where a bare bearing is required. When replacing a failed unit, the insert is normally the correct part; when designing a new arrangement, the bearing and housing are separate decisions.
What this means for the next order
The pattern across these questions is consistent. Insert series fixes the geometry, bore type fixes the shaft interface, material fixes the environment and grease fixes the operating condition. A purchase order that names only the bore diameter leaves three of the four open, and the resulting mismatch usually appears months later as vibration or seal failure rather than as a delivery error. The supplier's role is to make the ranges and the documents available; the buyer's role is to specify the four variables together and to ask for the values the catalogue does not state.
For readers who want the full product and capability reference behind this article, LDK publishes its company brochure covering the insert, housing and material ranges discussed here.
¿Tiene preguntas o necesita más detalles?
Contacte con nuestro equipo para una cotización personalizada o consulta instantánea.
Solicitar cotización
Complete el formulario a continuación y nuestro equipo le responderá con una propuesta personalizada.
Chat directo de WhatsApp
¿Prefiere chatear en tiempo real? Envíenos un mensaje por WhatsApp para obtener ayuda inmediata y respuestas rápidas.
- Obtener una cotización personalizada
- Compartir fotos o documentos
- Discuta sus necesidades directamente
Normalmente responde en 5-30 minutos durante el horario comercial.
