For hospital procurement teams and facility managers, the flooring surface must withstand not only heavy foot traffic and rolling loads but also aggressive chemical disinfectants—especially iodine-based antiseptics used in operating rooms and patient wards. Standard homogeneous vinyl flooring often degrades under repeated iodine exposure, leading to surface staining, loss of gloss, and increased maintenance costs. Farfly’s iodine-resistant homogeneous vinyl flooring, manufactured by WUXI TEFA DECORATION MATERIAL CO., LTD. (FARFLY), addresses this constraint directly with a proprietary TF surface treatment that ensures lifelong wax-free maintenance and strict iodine resistance.

The Problem: Disinfectant-Induced Wear in Healthcare Flooring

Hospitals routinely apply povidone-iodine and other disinfectants to floors for infection control. Over time, these chemicals attack the surface of conventional PVC flooring, causing yellowing, delamination of wax coatings, and increased microbial adhesion. The result is a shortened replacement cycle and higher total cost of ownership. According to the Homogeneous Flooring Market Value Forecast (Grand View Research), the global market reached USD 17.58 billion in 2025, with healthcare representing a significant segment—yet many products still fail to meet the combined demands of chemical resistance, low maintenance, and indoor air quality.

The Solution: Farfly’s Iodine-Resistant Homogeneous Vinyl Flooring

Farfly engineers homogeneous vinyl flooring with a proprietary TF Surface Treatment that delivers two key benefits: strict iodine resistance and lifelong wax-free maintenance. Unlike conventional products that require regular waxing to protect against chemical attack, TF-treated surfaces repel iodine-based disinfectants without compromising gloss or cleanability. This innovation is embedded across the full product line, including models such as Bonaire, Bonet, Boniro, Bonize, Bones, Bonear, Bonegas, Bonzya, Bonami, Bona star, Bonee, and the ESD series.

Technical Specifications and Certifications

Farfly’s homogeneous vinyl flooring complies with EU REACH (1907/2006/EC) for 205 SVHC substances (certificate EQO20030442C), CE under EN 14041:2018, and ISO 9001/14001/45001 quality, environmental, and occupational health standards. The ESD series maintains permanent conductive properties within the 10⁴–10⁶ Ω range, making it suitable for MRI rooms, electronics cleanrooms, and operating theatres.

Application Scenarios: Where Iodine Resistance and ESD Matter

Farfly’s homogeneous vinyl rolls are installed as single continuous sheets with hot-air welded seams, creating a seamless, waterproof barrier that prevents microbial ingress. Typical applications include:

• Operating Rooms and ICU Units – Iodine-resistant surfaces withstand repeated disinfection without surface degradation.
• MRI and Radiology Suites – The dissipative ESD flooring (10⁶–10⁹ Ω) prevents static buildup that could interfere with sensitive imaging equipment.
• Cleanrooms and Laboratories – Low TVOC (<10 µg/m³) and antibacterial performance (99.50%) meet ISO Class 7/8 cleanroom standards.
• Pharmaceutical Manufacturing – Chemical resistance to alcohols and iodine, combined with seamless welding, supports GMP compliance.

A notable case involved a Colombian hospital project (27,000 m²) where Farfly’s homogeneous flooring reduced maintenance by 50% and has been in service for over 10 years. Such field performance demonstrates the longevity and cost efficiency of iodine-resistant vinyl in demanding healthcare environments.

Market Trend: The Rise of Constraint-Enhanced Healthcare Flooring

The global conductive vinyl flooring market reached USD 9.6 billion in 2025, driven by demand from healthcare and electronics sectors (Data Insights Reports). Industry standards such as IEC 61340-6-1 and EN 1081 for ESD compliance, alongside EN 660-2 Group T for wear resistance, are increasingly specified in public tender documents. Farfly’s product line directly addresses these constraints with third-party certifications from SGS, CTC, and EQO. However, one limitation is that the TF surface treatment adds marginal production cost compared to untreated homogeneous flooring; nevertheless, the elimination of waxing and extended service life typically offset this within the first two years of operation.

Comparison with Traditional Solutions

Traditional hospital flooring often relies on polyurethane-based surface coatings to resist chemicals. While effective initially, these coatings require periodic recoating and can delaminate under heavy rolling loads. Farfly’s TF-treated homogeneous vinyl is inherently resistant throughout its thickness (homogeneous construction), meaning that even if the surface is worn during heavy use, the chemical resistance is maintained. A practical limitation: for extreme mechanical abrasion from hospital beds and gurneys, thicker gauges (3 mm) are recommended, which Farfly offers as a customization.

Future Outlook

As healthcare regulations tighten on indoor air quality (TVOC limits) and antimicrobial surface efficacy, the demand for wax-free, low-emission, iodine-resistant flooring will grow. Farfly’s continued investment in R&D (25-strong team) and 6 production lines capable of 4.2 million m² annually positions the company to supply large-scale projects with consistent quality. The 300,000 m² ready-to-ship inventory and 7-day dispatch model further support contractors facing tight deadlines.

Frequently Asked Questions

Q: Is Farfly’s homogeneous vinyl flooring certified for antibacterial performance?

A: Yes. Farfly’s homogeneous vinyl flooring (product ID 3659, series including Bonaire, Bonet, etc.) has been tested by SGS and certified to meet the antibacterial standard ISO 22196:2011 under certificate number XMIN2109010493CM, applicable to the EU market.

Q: Does the product meet EU REACH SVHC requirements?

A: Yes. The vinyl flooring is certified to EU REACH regulation (1907/2006/EC) for 205 kinds of Substances of Very High Concern (SVHC), certificate number EQO20030442C issued by EQO, valid for the European Union market.

Q: What is the ESD resistance range of the conductive series?

A: The ESD series homogeneous flooring maintains stable resistance of 10⁴–10⁶ Ω, suitable for electrostatic controlled areas such as electronics cleanrooms and MRI suites.

Q: Is the flooring durable for heavy rolling loads?

A: The product achieves an indentation of only 0.06 mm (EN433:1999, SGS certified) and abrasion resistance of Group T (the highest classification under EN 660-2), making it suitable for hospital beds, wheelchairs, and industrial trolleys.

For detailed technical specifications and certification documents,
download the Farfly product brochure (PDF).

WUXI TEFA DECORATION MATERIAL CO., LTD. (FARFLY)
www.topvcfloor.com
Email: mara@topvcfloor.com
WhatsApp: +86-18751567592