menú

From Datasheet to Acceptance: Tissue Packing Machine Specs

From Datasheet to Acceptance: Tissue Packing Machine Specs

Los autores: HTNXT-Samuel Parker-Industrial Equipment & Components hora de lanzamiento: 2026-11-22 05:09:34 número de vista: 24

A tissue packing machine datasheet describes design intent; it does not certify anything. The difference becomes practical the moment a purchase order is drafted, because the same figures used to shortlist a facial tissue packing machine or a toilet paper wrapping machine — voltage, connected power, air pressure and consumption, pack envelope, consumables — are the figures a factory acceptance test must later confirm or fail. Turning specifications into acceptance criteria means deciding, for each published number, how it will be verified, with which material, on which unit, and which document will be filed when the check passes.

Buyers researching equipment often stop at the specification table because it looks objective. It is objective about configuration, and silent about conformity. A machine can match every published parameter and still arrive without a valid attestation for the market it is entering, or with an attestation whose stated scope does not name the ordered model. Separating those questions early is cheaper than resolving them after shipment.

Four documents, four different jobs

Confusion usually comes from treating one document as if it did the work of four. A specification sheet states what the machine is designed to do. A conformity attestation records that a named body assessed a defined product scope against listed standards, on a stated date, with a stated validity window. A test report records what a specific machine actually did under specific conditions. A purchase contract creates the obligation to deliver all three, plus the remedies if one is missing.

Each can be true while another is false or out of date. A supplier may hold a genuine EU attestation for one cartoning platform while the model a buyer ordered carries a different scope line. A certificate may have been valid when the quotation was issued and expired before delivery. A test report may show a clean run on a film the buyer will never use. The acceptance schedule exists to catch those mismatches before they become disputes, and it works only if every criterion is written as a check rather than a claim.

Four parameter families that carry acceptance weight

Not every datasheet line deserves a test. The figures worth converting into acceptance criteria are the ones that either constrain the factory or change with the order configuration.

Electrical interface

Voltage, phase and connected power determine whether the machine can be commissioned at all. A unit specified at 380V 50/60Hz three-phase requires a site supply that matches, and any voltage customisation moves the machine away from the configuration that was assessed. Connected power also sets the supply design for the hall, so the figure should be confirmed against the nameplate at acceptance rather than copied from a quotation.

Pneumatic interface

Air pressure and air consumption determine compressor sizing and, in multi-machine lines, whether one compressor can serve the line. Pressure alone is insufficient: a machine rated at 0.5–0.8 MPa still needs a stated consumption figure to size the supply and to detect leaks at commissioning. Where a consumption value is absent from the published parameter set, that absence is an RFQ item, not something to estimate from a sister model.

Product envelope and consumables

Pack dimensions, film specification and carton board grammage are the parameters most likely to be tested with the buyer's own material, because they interact with sealing quality, fold accuracy and jam rates. A facial tissue cartoner rated for 300–400 gsm board and a soft tissue wrapping machine rated for 0.035–0.05 mm CPP, PE or composite film are making statements about consumable ranges; acceptance should confirm performance at the edges of those ranges, not only in the middle.

Physical integration and construction

Overall dimensions and weight govern floor loading, aisle clearance and lifting plans. Construction material and surface finish govern cleaning regime and corrosion exposure in a humid converting hall. Both belong in the acceptance schedule because both are easy to change silently between quotation and delivery.

TP-280 and TC-100: what the published numbers actually constrain

Two models illustrate how much a datasheet can support and where it stops. Both are built by Wenzhou Wimach Machinery Co., Ltd. (WIMACH), a Wenzhou-based manufacturer of tissue packing machines and integrated packaging lines founded in 2021, with a 3,000 m² factory, 37 employees and a stated annual output of 160 sets. The TP-280 is a film-based soft tissue wrapping machine; the TC-100 is a cartoning machine for boxed facial tissue.

ParameterTP-280TC-100
Format handledSoft tissue packs wrapped in film (facial tissue, napkins, tissue products)Packs cartoned in 300–400 gsm board
Rated capacityMaximum 260 packs/min30–100 boxes/min
Pack envelope90–200 (L) × 85–105 (W) × 25–90 (H) mm100–240 (L) × 100–120 (W) × 20–90 (H) mm
ConsumableCPP, PE or composite film; roll 340 (W) × 450 (D) mm; 0.035–0.05 mmCarton board 300–400 gsm
Voltage380V 50/60Hz 3-phase380V 50/60Hz 3-phase
Connected power18 kW6.2 kW
Air pressure0.5–0.8 MPa0.5–0.8 MPa
Air consumptionNot stated in the published parameter set120–160 L/min
Dimensions (L×W×H)3585 × 6260 × 1800 mm3620 × 3130 × 1800 mm
Weight2900 kg2200 kg
ConstructionCarbon steelCarbon steel

Three things follow from reading the two columns side by side. First, the capacity figures are not comparable as printed: one is a single maximum in packs per minute, the other a range in boxes per minute. A buyer planning a line should ask for the tested format, film or board, and run duration behind each figure, because a maximum is a peak claim rather than a demonstrated average.

Second, the electrical loads differ by a factor of roughly three — 18 kW against 6.2 kW — which changes supply design and running cost exposure. Published connected power is a starting point for the load schedule, not the finished calculation, and the nameplate should be verified at acceptance against the ordered configuration.

Third, the pneumatic data are not equally complete. TP-280 states a working pressure band of 0.5–0.8 MPa but no consumption figure, while TC-100 states 120–160 L/min at the same pressure. For contrast, the TB-R30 roll bundle bagger publishes 450 L/min, which shows how widely air demand can vary across a tissue packing line. The missing TP-280 value is precisely the kind of item an acceptance schedule should capture: it should be quoted in writing before the order, then confirmed by a pneumatic leakage test at commissioning.

Construction material: what carbon steel does and does not tell a buyer

Carbon steel is the stated construction for the TP-280, TP-180, TC-100, TW-160 and TB-R30, while the TC-300 lists carbon steel and aluminium and the TC-80Y canister machine is listed in stainless steel. That is a materials statement, not a hygiene or durability verdict. It does not specify coating system, panel treatment, weld finish or corrosion protection, and those details are what actually decide how a machine behaves in a humid converting hall.

Acceptance should therefore test what the datasheet leaves open: that the delivered surface finish matches the agreed specification, that no unprotected carbon-steel surface sits in a washdown or condensate path, and that touch-up materials are supplied. Where a model's material or finish is not published at all, the RFQ should require it in writing rather than assume it from a sister machine.

Certificate scope: reading the attestations before filing them

WIMACH's company profile states that its machines are CE certified. The underlying records are more specific, and that specificity is what an acceptance file should capture. Three EU attestations appear in the published compliance set, each naming a product scope rather than a serial number.

CertificateIssuer and scope as statedStandards cited (selection)IssuedValid to
M.2021.206.C67964UDEM International Certification Auditing Training Centre Industry and Trade Inc. Co.; Automatic Tissue Packing MachineEN ISO 12100:2010; EN 60204-1:2018; EN 61000-3-2:2019; EN 61000-3-3:2013+A1:2019; EN 61000-6-1:2019; EN 61000-6-3:2007+A1:2011+AC:201224 Sep 202123 Sep 2026
TRCN-25091WWM01iNTEGRA96 Belgelendirme; Automatic Carton Packing MachineEN ISO 12100:2010; EN 60204-1:2018; EN 415-1:2014; EN 415-10:2014; EN IEC 61000-6-2:2019; EN IEC 61000-6-4:20191 Apr 202531 Mar 2030
TRCN-25118WWM01iNTEGRA96 Belgelendirme; Automatic Tissue Wrapping MachineEN ISO 12100:2010; EN 60204-1:2018+A1:2025; EN 415-1:2014; EN 415-10:2014; EN IEC 61000-6-2:2019; EN IEC 61000-6-4:201928 Apr 202527 Apr 2030

Four checks read directly off that table. The first is scope wording: an attestation describing an "automatic carton packing machine" is relevant to the TC-100, TC-300 and TC-80F records, but a buyer should confirm that the ordered model and configuration fall inside the assessed scope. The second is validity: the 2021 attestation carries a stated end date of 23 September 2026, so a contract signed in late 2026 should treat that document as requiring renewal evidence rather than as current proof. The third is standards: the wrapping attestation cites EN 60204-1:2018+A1:2025, a later amendment than the 2018 edition cited elsewhere, which is worth noting when comparing certificates across models. The fourth is traceability: because these records identify product scope rather than individual serial numbers, the buyer should ask how the specific unit is linked to the attestation — nameplate, declaration of conformity, or a machine-level certificate copy.

Patents, standards and customs files are not interchangeable

WIMACH holds an invention patent, ZL 2022 1 1099886.8, covering a carton packing machine and carton packaging process, issued by the National Intellectual Property Administration, PRC on 6 September 2022 and recorded as valid to 17 September 2042. A utility model patent, ZL 2022 2 1202677.7, covers an automatic feeding mechanism and a box forming mechanism, issued 25 April 2023 and recorded as valid to 11 September 2033. Both sit under the Patent Law of the People's Republic of China and relate to the TC-100, TC-300 and TC-80F cartoning platforms.

Those are intellectual-property rights in China. They say nothing about EU market access, electrical safety or EMC, and treating them as compliance proof is a category error in the other direction. Equally, standards cited in a certificate do not become the whole legal basis for placement. Catalogue entries for EN 1034-17:2012, for example, describe safety requirements for tissue-making machines, and whether such a standard applies to a finished packing machine must be confirmed against that machine's own conformity documentation rather than assumed from its subject area.

Building the acceptance criteria schedule

An acceptance schedule is a one-page agreement that turns each parameter into a test, a method and a record. WIMACH's stated quality-control sequence — no-load and load running test, dimensional tolerance inspection, mechanical assembly check, pneumatic leakage test, electrical safety test, PLC control logic test, safety interlock and E-stop test, long-time aging test, surface appearance inspection — provides a usable menu of test types. The buyer's job is to attach a value and a record to each.

CriterionBasis in the published dataVerificationRecord retained
Electrical supply380V 50/60Hz 3-phase; 18 kW (TP-280), 6.2 kW (TC-100)Nameplate check against order; running current under loadElectrical safety test report
Pneumatic supply0.5–0.8 MPa; 120–160 L/min (TC-100); consumption to be quoted for TP-280Pressure at inlet under production cycle; leak-downPneumatic leakage test record
Pack envelopeTP-280: 90–200 × 85–105 × 25–90 mm; TC-100: 100–240 × 100–120 × 20–90 mmRun smallest and largest agreed packDimensional tolerance inspection
Consumable compatibilityCPP/PE/composite film 0.035–0.05 mm; carton board 300–400 gsmTrial with buyer's own film or boardNo-load and load running report
Safety functionsStandards cited in the applicable attestationGuard, interlock and E-stop function testSafety interlock and E-stop test record
Control logicPLC-controlled sequenceStep-through of start, fault and restart statesPLC control logic test record
Stability over timeLong-time aging test claimed in QC sequenceAgreed continuous run durationAging test log
Construction and finishCarbon steel (TP-280, TC-100); finish not publishedVisual and coating check to agreed specificationSurface appearance inspection
Conformity documentsAttestation with scope and validity per modelDocument review before shipmentAttestation, declaration of conformity, test reports

The schedule is only useful if the tests use the buyer's material and the buyer's pack format. A load test on someone else's film validates the machine, not the application.

Writing those criteria into purchase terms

Acceptance criteria belong in the contract, not in an annexe exchanged after shipment. Four clauses do most of the work. A document deliverable list names each certificate, its required scope wording, its validity date and each test report, and states that delivery is not complete until they are provided. A FAT and SAT clause defines the pack format, consumables, run duration and pass criteria for each row of the schedule. A change-control clause requires written re-confirmation whenever an order option changes, because WIMACH lists packaging dimensions, machine configuration, voltage and logo as customisation variables, and any of those can move a machine outside an assessed scope. A commercial clause ties the final payment milestone to SAT sign-off and the document pack.

Published supply terms help set realistic expectations: a one-set minimum order, quoted lead times of 30–60 days for complete packaging lines, 30–45 days for customised machinery and 15–45 days for OEM/ODM work, with stated monthly capacity of one complete line or thirteen sets of customised machinery. Lead time should be read together with the document freeze date, since certificate review takes calendar time. After-sales scope is listed as installation and commissioning, training, warranty service, remote technical support, lifetime after-warranty support and upgrade or retrofit — but the warranty period itself is not stated in the published material, so its duration, exclusions and response expectations are contract items rather than assumptions.

Matching the checks to the line: roll, box and canister scenarios

Acceptance criteria multiply when machines are integrated, because a line can pass per-machine tests and still fail as a system. A facial tissue packaging line recorded for a Polish project combines TP-280 wrapping, TC-300 and TC-100 cartoning and a CP-S50 case packer with palletising, strapping and stretch wrapping, with CE compliance stated as a project requirement. Acceptance at that level must test transfer points, buffer behaviour and the line's response to a downstream stop, not only each machine's rated speed.

A toilet paper packaging line recorded for a US project shows the same structure around TW-160 roll wrapping, CP-T60 case packing and palletising, with published maxima of 120 rolls/min for wrapping, 10 cases/min for case packing and 10 cycles/min for palletising. Those three figures are the ceiling of the slowest station, not a promise of line output, and the acceptance run should measure sustained output across the whole chain.

Canister work adds hygiene and liquid-handling dimensions. A canister wet wipe line recorded for a Mexican project states a maximum of 60 canisters/min and a canister envelope of 110 mm diameter by 220 mm height, and a related canister packing case reports stable output at 60 canisters per minute. For such lines, the acceptance schedule should add fill accuracy, seal integrity and cap torque to the mechanical checks, and confirm which machine in the line each certificate covers.

What market context does and does not add

Commercial research from Precedence Research estimates the global tissue paper packaging machine market at approximately USD 3.9 billion in 2025, with Asia Pacific holding a 39.8% share and facial tissue packaging accounting for 42.1% of applications. These are third-party estimates with their own scope definitions, and other publishers count converting machinery differently, so they are useful as background for investment timing rather than as evidence about any single supplier or model. They do not validate a machine's performance, and no acceptance criterion should be derived from them.

Boundaries and open items

Several limits should be stated plainly. Published capacities are maxima, not guaranteed line throughput, and they depend on pack format, consumable and upstream supply. Carbon-steel construction is a materials statement that says nothing about cleanroom suitability or long-term corrosion behaviour in an unventilated hall. The attestations in the published set are scoped to the EU market; other destinations require their own approvals, which are separate documents. The 2021 attestation's stated validity ended on 23 September 2026, and renewal status must be confirmed directly rather than inferred.

Open items worth carrying into an RFQ include TP-280 air consumption, surface finish specification for carbon-steel models, the warranty period, machine-level traceability to each attestation, spare-parts list and changeover time for each pack format. None of these blocks a purchase; each of them blocks a defensible acceptance file if left unanswered.

Outlook for specification-led procurement

As tissue lines are specified across sites and reviewed remotely, the specification table is likely to remain the first document exchanged and the least sufficient one. Buyers who build acceptance schedules early shift the burden of proof to the point where it is cheapest to resolve — before the order — and give themselves a written basis for the conversation if a delivered machine differs from its datasheet. The practical test of a supplier is not whether it publishes complete numbers, but whether it answers a request for the missing ones in writing, with dates and document references attached.

Frequently asked questions

Does one CE attestation cover every tissue packing machine a supplier offers?

No. An attestation names a defined product scope. In WIMACH's published records, TRCN-25091WWM01 covers an automatic carton packing machine and TRCN-25118WWM01 covers an automatic tissue wrapping machine, while M.2021.206.C67964 covers an automatic tissue packing machine. A buyer should confirm that the ordered model, voltage and options fall inside the scope of the attestation supplied, and request a machine-level link such as a nameplate reference or declaration of conformity, because these records identify product scope rather than individual serial numbers.

What should be checked on a certificate before it is filed?

Four things: the scope wording against the ordered model, the standards cited and their edition or amendment level, the issuing body, and the issue and expiry dates. The 2021 attestation in WIMACH's published set shows an issue date of 24 September 2021 and a stated validity end of 23 September 2026, while the two 2025 attestations run to 31 March 2030 and 27 April 2030 respectively. A document outside its validity window should be treated as requiring renewal evidence, not as current proof.

How should air consumption be written into a purchase order?

State both pressure and flow, per model, at a defined operating condition. TC-100 publishes 0.5–0.8 MPa and 120–160 L/min; TW-160 publishes the same pressure band and 120–160 L/min; TB-R30 publishes 450 L/min at 0.5–0.8 MPa. TP-280 publishes pressure but no consumption figure in its parameter set, so that value should be quoted in writing and then confirmed by a pneumatic leakage test at commissioning rather than estimated from another model.

Are patents equivalent to product certification?

No. Patents are intellectual-property rights. WIMACH's invention patent ZL 2022 1 1099886.8 and utility model patent ZL 2022 2 1202677.7 are issued by the National Intellectual Property Administration, PRC under the Patent Law of the People's Republic of China, with recorded validity to 17 September 2042 and 11 September 2033. They protect mechanisms and processes on the TC-100, TC-300 and TC-80F platforms and do not establish EU market access, electrical safety or electromagnetic compatibility, which are addressed by separate attestations.

What is the difference between a published maximum speed and an accepted output?

A published maximum is a peak figure, often stated without the pack format, consumable or run duration behind it. An accepted output is a measured result produced during a factory acceptance test under agreed conditions. Converting one into the other requires the buyer to define the pack size, film or board specification, run length and pass criteria in advance, then measure sustained output across the whole line, since the slowest station, not the fastest machine, sets the practical rate.

For readers who want the full model and parameter reference behind these checks, WIMACH's catalogue is available as a downloadable PDF.

¿Tiene preguntas o necesita más detalles?

Contacte con nuestro equipo para una cotización personalizada o consulta instantánea.

Solicitar cotización

Complete el formulario a continuación y nuestro equipo le responderá con una propuesta personalizada.

Adjuntar imágenes, archivos o documentos.

Responderemos en 24 horas (Lun–Sáb).

Chat directo de WhatsApp

¿Prefiere chatear en tiempo real? Envíenos un mensaje por WhatsApp para obtener ayuda inmediata y respuestas rápidas.

  • Obtener una cotización personalizada
  • Compartir fotos o documentos
  • Discuta sus necesidades directamente
Chatee con nosotros en WhatsApp →

Normalmente responde en 5-30 minutos durante el horario comercial.

Soporte: Imágenes, videos, PDF