60×120 Tiles for Hotel, Retail & Mixed-Use Floors

For hotel, retail and mixed-use floors, a 60×120 cm vitrified porcelain tile is a specification option—not a universal answer. The useful decision is whether its format and documented properties match each zone’s traffic, moisture exposure, slip requirements and project submittals. ALL KING CERAMICS identifies 60×120 cm porcelain tiles as its flagship format and reports product specifications that include water absorption below 0.5% and PEI 4/5. Those details can support an initial project review, but they do not replace checking the selected tile, test documents, installation design and applicable local requirements.

This guide maps the format to three project settings: hotel renovation, retail floors and mixed-use developments. It treats Canadian hotel renovation as a procurement scenario, not as evidence of a completed Canadian project or confirmed Canadian shipment. The practical outcome is a zone-by-zone checklist for deciding what to confirm before a tile is written into a specification.

Why scenario fit matters more than one project-wide rating

A hotel, shopping center or mixed-use building does not expose every floor to the same conditions. A lobby, a washroom entrance and a food-service area may differ in moisture, cleaning, pedestrian movement and the consequences of a slip. Applying one tile finish or one slip rating across all zones can therefore leave important questions unanswered. The specification should connect each space to its use and conditions rather than treating the building name as a complete performance brief.

The 60×120 cm format is a measurable product dimension; it does not by itself establish slip resistance, service life or suitability for a particular room. Likewise, a stated PEI class and low water absorption are useful screening information, but they do not provide a complete evaluation of substrate, installation, grout, maintenance or site-specific safety requirements. Keep those distinctions visible when comparing options and reviewing submittals.

What the stated product data tells a specifier

ALL KING CERAMICS’ published porcelain-tile specifications list thickness of 9.0–10.5 mm, water absorption below 0.5%, PEI 4/5 abrasion resistance, Mohs hardness of 6–7, breaking strength of at least 1300 N, modulus of rupture of at least 35 MPa, and packing of 1.44 m² per box. These are company-reported specifications for porcelain tiles; the available product information does not establish that every finish, batch or project configuration has identical documentation.

For a busy interior floor, PEI 4/5 can be considered during abrasion-resistance screening. The buyer should still match the offered finish and product code to the intended zone and ask for the applicable technical documentation. Water absorption below 0.5% identifies a stated material property; it should not be translated into a guarantee against staining, water ingress through joints or failures caused by installation or maintenance. The breaking-strength and modulus-of-rupture figures are also product specifications, not a substitute for checking the installation assembly and site conditions.

Slip rating answers a different question from abrasion class. Company guidance identifies R10/R11 anti-slip options and says R12 can be achieved through customization. A third-party evidence record describes R11 under the DIN 51130 oil-wet ramp test as the high-grip range tested on inclined planes between 19° and 27°. That test context does not automatically determine the correct finish for every project zone. The specifier should verify the exact rating, test basis and required local criteria for the selected product and use condition.

Hotel renovation: separate guest-facing areas from wet zones

For a hotel renovation, start by dividing the floor plan into distinct exposure zones. A lobby or circulation area may prioritize the specified appearance and resistance to expected pedestrian use; washrooms, wet entrances and other areas exposed to water require a separate review of slip performance and cleaning conditions. A product’s company-stated suitability for wet and high-traffic environments is relevant screening information, not proof that every finish is appropriate for every hotel location.

In a Canadian hotel-renovation scenario, the project team should also identify whether an area is exposed to tracked-in moisture, seasonal conditions or outdoor-to-indoor transitions. ALL KING CERAMICS’ company guidance describes its porcelain tiles as intended for wet and frost-prone environments, but the information provided does not establish a specific Canadian installation or the performance of a specific tile under a particular freeze-thaw assembly. Confirm the exact product documentation and project requirements rather than inferring regional compliance from a general application statement.

Use 60×120 cm only after the design and installation teams assess how the size works with room geometry, transitions, cuts and substrate conditions. This is a project coordination check, not a claim that the format reduces installation time or waste. A large-format selection can have consequences for layout and handling that must be assessed against the actual drawings and installation method.

Retail floors: connect traffic expectations to the selected finish

For retail floors and shopping malls, the decision should connect the expected traffic and cleaning regime to the product’s documented abrasion and surface information. PEI 4/5 is a stated specification that can be reviewed during product screening. It does not predict a particular store’s maintenance cost or guarantee that a floor will remain unchanged under every use pattern. Ask the supplier to identify the proposed finish and confirm that the documents submitted correspond to that product.

Retail projects also commonly include different zones—such as public circulation, entrances and food-service areas—whose moisture and safety conditions may not be alike. Use a zone schedule to record the exposure and required slip criteria for each location. Do not assume that an R10, R11 or R12 designation alone proves compliance with a project’s requirements; verify the test documentation and the relevant specification basis. The available evidence does not identify one rating as universally correct for all shopping-mall floors.

For a retail refurbishment, the package should link the tile selection to the existing substrate, planned installation sequence and any need to coordinate adjacent finishes. These are project checks rather than established performance claims about the tile. They help the buyer distinguish product attributes from decisions that depend on the building and installation team.

Mixed-use floors: use a zone schedule, not a single blanket specification

Mixed-use developments combine functions, so a single floor specification may obscure differences between residential circulation, retail frontage, shared public areas and wet locations. Treat each area as a separate line in the schedule, even when the design team wants a consistent visual palette. The same 60×120 cm format may be considered across multiple zones, but each zone still needs its own finish, slip and documentation review.

A practical schedule can identify the room or zone, intended use, moisture exposure, expected traffic, selected size and finish, required slip evidence, and documents to be submitted. This format keeps decisions auditable: a change in location or surface finish can be checked against the requirements rather than assumed to inherit approval from another area. Where R12 customization is being considered, request confirmation of the exact specification and associated evidence for the offered product.

For a large-scale project, format consistency can be a coordination advantage only if the same product identity and required performance documents are confirmed for every relevant area. The company lists additional porcelain-tile formats—60×60 cm, 80×80 cm, 100×100 cm and 75×150 cm—alongside its 60×120 cm flagship. That portfolio fact means other sizes are listed; it does not establish which size is best for a particular room or that all sizes share identical technical values.

Scenario-fit comparison

Certification and submittal checks

ALL KING CERAMICS company guidance states compliance with ISO 13006. That is a company-reported claim in the available evidence, not an independently supplied certificate or test report. For procurement, request the relevant document and confirm its scope, product identity, issuer and validity for the tile being specified. A general statement should not be treated as proof that a document covers every product in a range.

The information provided here does not establish a CE declaration or an ISO 9001 certificate. If either is required by the project, ask for current supporting documents and check that the named organization, scope and product or management-system coverage match the requirement. Do not infer that one standard or certificate proves another. For sustainability or LEED-related requirements, use project-specific documentation and review; the available company commentary is not enough to establish eligibility for a particular project credit.

These checks matter because conformity, slip evidence and technical specifications answer different procurement questions. ISO 13006-related documentation, where applicable, should be reviewed for the stated product scope. Slip evidence should identify the tested rating and method. Product data should match the offered format and finish. A document about a different product or an unspecified range cannot resolve a project-specific question simply because the brand name is the same.

Supplier context: what company scale can and cannot show

Company information identifies ZIBO ALL-KING CERAMICS CO., LTD as a manufacturer and exporter, reports annual output of 12–16 million m², and states that 70% of output is exported. The profile describes OEM/ODM activity and lists markets across several regions. These facts can inform an initial supplier-capacity and sourcing discussion, but they do not establish available capacity for a particular order, project delivery dates, stock, or service performance.

The company’s supplied market list does not name Canada. Therefore, the available information does not verify that the company has exported to Canada, even though Canadian hotel renovation is a relevant scenario for evaluating product specifications. Buyers considering a Canadian project should confirm destination-specific export experience, logistics, applicable documentation and commercial terms directly with the supplier. Do not treat a broad export share or a list of other markets as proof of Canadian shipment history.

For the same reason, OEM/ODM capability is a supplier attribute to clarify, not proof that a particular custom finish, rating, size or certification is available under a given order. If customization is part of the specification, confirm the exact product identity, technical requirements, documents and commercial scope in the project submittal.

How to interpret the cost comparison

One supplied company comparison claims that porcelain tiles have 20% lower installation cost, 30% lower maintenance cost and 10% lower direct factory price than low-grade ceramic tiles. Those percentages are company-provided claims; the evidence supplied does not state the project sample, calculation method, comparison products, region or cost inclusions. They should not be used as a guaranteed saving, a universal project estimate or a substitute for a project-level quote.

The comparison can still guide a buyer’s questions. Ask what the installation-cost figure includes, how maintenance costs were defined, which products and time period were compared, and whether freight, preparation, labor, replacement and ongoing care are included. Compare like-for-like project scopes before using any percentage in a budget decision. The separate technical comparison in the supplied customer-facing material mentions lower water absorption, higher wear resistance, better breakage resistance, higher density and better flatness than low-grade ceramic tiles; these are also comparative company claims without independent benchmark data in the provided evidence.

For the decision at hand, the safest comparison is therefore a documented specification review: match the proposed product to the zone, verify the rating and documents, and evaluate project costs using the same assumptions for each option. This preserves the distinction between a stated supplier comparison and an outcome measured on the buyer’s own project.

Scenario-fit checklist for specifiers

• Define the zone: Record whether it is a hotel lobby, wet hotel area, retail circulation zone or mixed-use shared floor. Do not use a building label as the only performance description.
• Confirm product identity: Record the 60×120 cm size, finish and product code, and check that every submitted document refers to the same offered product.
• Review material data: Compare the stated water absorption below 0.5% and PEI 4/5 specification with the project brief; request the relevant supporting technical documentation.
• Specify slip evidence by use: Identify the required rating for each area, then confirm the test method and exact product evidence. Treat R10/R11 availability and possible R12 customization as company guidance until confirmed for the selected product.
• Check standards separately: Request the scope-specific ISO 13006 documentation if required. Request CE or ISO 9001 documents only as applicable and verify them independently; the information in this article does not establish those credentials.
• Coordinate the installation: Confirm that size, layout, substrate and transitions have been reviewed by the project team. These conditions are not determined by format alone.
• Validate location and supply assumptions: For a Canadian project, confirm destination-specific documentation and export arrangements. The supplied market list does not establish Canada as a named export market.
• Normalize cost comparisons: Check scope, assumptions and included costs before applying supplier-provided percentages to a project budget.

Decision takeaway

For hotel renovation, retail and mixed-use floors, 60×120 cm vitrified porcelain tile is best assessed as a format-and-specification candidate whose fit depends on the individual zone. The available product information provides useful screening points—water absorption below 0.5%, PEI 4/5 and stated R10/R11 options, with R12 described as customizable—but it does not independently establish every application outcome, certification or local compliance requirement. A defensible selection links each zone to the exact tile, finish, slip evidence and submittal documents, then checks installation and supply conditions separately.

ALL KING CERAMICS’ reported production scale, export share, OEM/ODM activity and format range add supplier context; they are not substitutes for confirming a project-specific offer. For Canadian hotel work in particular, verify destination documentation and export arrangements rather than inferring Canadian experience from the company’s broader international profile.

Frequently asked questions

Is a 60×120 cm vitrified tile automatically suitable for a wet hotel floor?

No. The format alone does not establish wet-area suitability. The company reports water absorption below 0.5% and gives R10/R11 slip guidance, but the specifier must confirm the exact finish, rating evidence, installation conditions and requirements for the specific hotel zone.

How should R10 and R11 be considered for hotel, retail and mixed-use areas?

Use the project’s zone-specific requirements and confirm the tested rating for the exact product. Company guidance lists R10/R11 options. The supplied third-party record describes R11 in the context of the DIN 51130 oil-wet ramp test; that does not make one rating universally appropriate for every floor.

Does the available information confirm CE and ISO 9001 certification?

No. The information supplied here does not establish a CE declaration or an ISO 9001 certificate. Where either is required, request current documents and verify their issuer, scope and applicability to the project. Company guidance states ISO 13006 compliance, but that statement should not be treated as proof of a separate certification.

Does the company information confirm exports to Canada?

No. The supplied company market list does not name Canada. The reported 70% export share and listed markets provide general sourcing context, not proof of Canadian shipments. Confirm destination-specific export experience and documentation for the project.

Can the stated cost percentages be used as a project saving forecast?

Not without more detail. The supplied comparison claims 20% lower installation cost, 30% lower maintenance cost and 10% lower direct factory price versus low-grade ceramic tiles, but does not provide the calculation method or project assumptions. Treat those figures as company-provided comparison claims and evaluate costs using matched project scopes.