Sobre nosotros JKS
With standardized production workshop and independent R&D team, we provide personalized design, free factory installation, technical training and formulation service according to clients’ raw material and production demand. Our extrusion machines have been exported to over 35 countries worldwide.
Nuestros productos
Ver todos los productos → →
Plastic Crusher
Modelo: SP400 / SP660
Parámetros: - Application: Crushing plastic scraps (PVC, PE, PP pipes, profiles, sheets, etc.) into small pieces for recycling.
- Models & parameters:
• SP400: 15kW, 300-400kg/h
• SP660: 22kW, 600-700kg/h
Plastic Pulverizer
Modelo: MF400 / MF500 / MF600
Parámetros: - Application: Pulverizing plastic scraps (PVC, PE, PP) into fine powder for recycling or compounding
- Models & parameters:
• MF400: 30kW, 200kg/h, fineness 40-80 mesh
• MF500: 37kW, 300-400kg/h, fineness 40-80 mesh
• MF600: 55kW, 400-500kg/h, fineness 40-80 mesh
PVC Mixing & Cooling Unit
Modelo: SRL-Z200/500 / SRL-Z300/600 / SRL-Z500/1000 / SRL-Z1000/3000
Parámetros: - Application: Mixing PVC resin with additives (stabilizers, plasticizers, fillers) at high speed, then cooling to prevent agglomeration.
- Models & parameters:
• SRL-Z200/500: 37/7.5kW, 300-400kg/h
• SRL-Z300/600: 55/11kW, 450-600kg/h
• SRL-Z500/1000: 75/15kW, 800-1000kg/h
• SRL-Z1000/3000: 160/22kW, 1600-2000kg/h
- Cycle time: Mixing 8-10 min/pot, Cooling 6-8 min/pot
Single Screw Plastic Extruder
Modelo: SJ Series (custom models: SJ30, SJ45, SJ65, SJ90, etc.)
Parámetros: Raw material: PVC / PP / PE / Nylon / ABS
Application: With different molds & auxiliary equipment, it can produce pipes, rods, films, pellets, coated products, blow-molded bottles and other thermoplastic products/semi-finished products.
Core features: Versatile, suitable for various thermoplastic processing needs
Conical Twin Screw Plastic Extruder
Modelo: SJSZ-45 / 51 / 55 / 65 / 80 / 92 / 110
Parámetros: Features: Uniform plasticizing & mixing, low shearing, high productivity, stable quality, long service life
Application: Direct extrusion of PVC powder for pipes, sheets, bars, profiles and other plastic products
Main models & parameters:
- SJSZ-45: 15kW, 70kg/h
- SJSZ-51: 18.5kW, 120kg/h
- SJSZ-55: 22kW, 150kg/h
- SJSZ-65: 37kW, 250kg/h
- SJSZ-80: 55kW, 400kg/h
- SJSZ-92: 90kW, 500-600kg/h
- SJSZ-110: 200kW, 1000kg/h
Plastic Strand Cutting Pelletizing Line
Modelo: ST80、ST100、ST120、ST150
Parámetros: Raw material: PE/PP/ABS/PS/HIPS/PC
L/D: 35:1
ST80: 55kW, 70-160kg/h
ST100: 75kW, 170-280kg/h
ST120: 90kW, 250-400kg/h
ST150: 110kW, 350-650kg/h
Features: Strand cutting, water cooling, suitable for virgin compounding or waste plastic recycling
ST80: 55kW, 70-160kg/h
ST100: 75kW, 170-280kg/h
ST120: 90kW, 250-400kg/h
ST150: 110kW, 350-650kg/h
Features: Plasticizing + granulation integrated, suitable for plastic waste recycling
PVC Hot-cut Pelletizing Line
Modelo: SJSZ55、SJSZ65、SJSZ80、SJSZ92
Parámetros: Raw material: PVC powder / PVC scraps
Extruder: Conical twin-screw extruder
Output & Power:
SJSZ55: 22kW, 100-150kg/h
SJSZ65: 37kW, 200-250kg/h
SJSZ80: 55kW, 350-400kg/h
SJSZ92: 110kW, 650-800kg/h
Features: hot die-face cutting, uniform pellets, with cooling & grading system
Multi-material Plastic Profile Extrusion Line
Modelo: SJ45、SJ50、SJ65
Parámetros: Raw material: PP / PE / PVC / PS / PC / ABS
Custom mold to produce: imitation marble profile, ceiling panel, door&window small profile, sealing strip, edge band, PC lamp profile, PVC waterstop
Full line: feeding system → single screw extruder → calibrating table → cooling tank → haul-off → fixed-length cutting
Solid Plastic Rod Extrusion Line
Modelo: SJ45、SJ65
Parámetros: Raw material: PP, PE, PA, POM
SJ45: Screw Φ45mm, L/D28:1, Power7.5kW, Produce rod Φ6~60mm, Output5~18kg/h
SJ65: Screw Φ65mm, L/D30:1, Power18.5kW, Produce rod Φ30~200mm, Output20~60kg/h
Full set: feeding dryer, extruder, sizing mould, cooling tank, caterpillar haul-off, fixed-length cutting & stacking device
PVC & WPC Door and Window Profile Extrusion Line
Modelo: SJSZ92/188, SJSZ65/132
Parámetros: SJSZ92/188
Raw material: PVC resin + calcium powder + recycled material + wood powder + auxiliary additives
Main motor power:110kW
Extrusion output:500~600kg/h
Finished panel width:max1200~1600mm; produce hollow waterproof integral WPC door slab
SJSZ65/132
Raw material: PVC resin + high-content calcium powder + additives
Main motor power:37kW
Extrusion output:150~250kg/h
Produce WPC door jamb, door casing, decorative surround profile
PVC Grille & Decoration Profile Extrusion Line
Modelo: SJSZ51(18.5kW)、SJSZ55(22kW)、SJSZ65(37kW)
Parámetros: Raw material: PVC+CaCO₃
SJSZ51: Product width100mm, Output120kg/h
SJSZ55: Product width150mm, Output150kg/h
SJSZ65: Product width300mm, Output250kg/h
Produce window&door profile, skirting line, decorative moulding, WPC deck tile
WPC Door Panel Extrusion Line
Modelo: SJSZ80, SJSZ92
Parámetros: Main motor power: 75kW (SJSZ80) / 110kW (SJSZ92)
Suitable material: PVC + CaCO₃ compound
Output capacity: 250-400kg/h (SJSZ80) / 400-600kg/h (SJSZ92)
PVC Hollow Wall Panel & Ceiling Extrusion Line
Modelo: SJSZ51、SJSZ55、SJSZ65、SJSZ80
Parámetros: Raw material: PVC+CaCO₃
SJSZ51: Power18.5kW, Width300mm, Output120kg/h
SJSZ55: Power22kW, Width450mm, Output150kg/h
SJSZ65: Power37kW, Width600mm, Output250kg/h
SJSZ80: Power55kW, Width1200mm, Output400kg/h
Produce wall panel, ceiling board, door panel, furniture cabinet panel
Corrugated Pipe Extrusion Line
Modelo: KSPG-63、KSPG-32、KSPG-20、KS-160、KS-75
Parámetros: KSPG-63: Screw Φ65, L/D33:1, Power70kW, Pipe Φ16~Φ63mm, haul-off speed10m/min
KSPG-32: Screw Φ50, L/D30:1, Power50kW, Pipe Φ8~Φ20mm, haul-off speed15m/min
KSPG-20: Screw Φ45, L/D30:1, Power45kW, Pipe Φ6~Φ10mm, haul-off speed20m/min
KS-160: Screw Φ75, L/D33:1, Power100kW, Pipe Φ90~Φ160mm, haul-off speed5m/min
KS-75: Screw Φ65, L/D33:1, Power80kW, Pipe Φ50~Φ75mm, haul-off speed10m/min
MPP & PE High Voltage Power Pipe Extrusion Line
Modelo: PEG63、PG160
Parámetros: Raw material: MPP / PE, optional for PP, ABS, PEX, silicon core pipe
PEG63: pipe spec φ20~φ63mm, line speed 0.3~4.5m/min, installed power 70kW
PG160: pipe spec φ75~φ160mm, line speed 0.3~2m/min, installed power 125kW
Whole line: AC frequency control; 2/3/4-claw traction optional; chipless cutting system
PPR Pipe Extrusion Line
Modelo: PPR20-75, PPR20-110
Parámetros: PPR20-75
Type: PPR20-75
Extruder Model: GS65/33
Main Motor Power: 37kW
Auxiliary Model: GS50/33
Extrusion Capacity: 80-160kg/h
PPR20-110
Type: PPR20-110
Extruder Model: GS90/30
Main Motor Power: 75kW
Auxiliary Model: GS55/33
Extrusion Capacity: 80-250kg/h
Steel Wire Mesh Reinforced Composite Pipe Extrusion Line
Modelo: GS/PE-160-H, GS/PE-250-H, GS/PE-315-H, GS/PE-500-H, GS/PE-630-H
Parámetros: GS/PE-160-H
Type: GS/PE-160-H
Pipe Range: φ50-160mm
Maximum Speed: 2.4m/min
Installed Capacity: 480kW
Actual Power Consumption: 312kW
GS/PE-250-H
Type: GS/PE-250-H
Pipe Range: φ75-250mm
Maximum Speed: 2.4m/min
Installed Capacity: 550kW
Actual Power Consumption: 358kW
GS/PE-315-H
Type: GS/PE-315-H
Pipe Range: φ90-315mm
Maximum Speed: 2.4m/min
Installed Capacity: 580kW
Actual Power Consumption: 377kW
GS/PE-500-H
Type: GS/PE-500-H
Pipe Range: φ250-500mm
Maximum Speed: 1.4m/min
Installed Capacity: 630kW
Actual Power Consumption: 410kW
GS/PE-630-H
Type: GS/PE-630-H
Pipe Range: φ315-630mm
Maximum Speed: 1.2m/min
Installed Capacity: 800kW
Actual Power Consumption: 559kW
HDPE Water Pipe Extrusion Line
Modelo: PE110, PE315, PE630, PE1000, PE1600
Parámetros: PE110
Production Line Type: PE110
Pipe Diameter Range: Φ20-110mm
Extruder Model: GS60/38 (optional GS75/33)
Main Motor Power: 90kW
Extrusion Capacity: 150-400kg/h
PE315
Production Line Type: PE315
Pipe Diameter Range: Φ110-315mm
Extruder Model: GS75/38 (optional GS90/33)
Main Motor Power: 160kW
Extrusion Capacity: 200-600kg/h
PE630
Production Line Type: PE630
Pipe Diameter Range: Φ315-630mm
Extruder Model: GS90/38 (optional GS120/33)
Main Motor Power: 280kW
Extrusion Capacity: 600-1000kg/h
PE1000
Production Line Type: PE1000
Pipe Diameter Range: Φ630-1000mm
Extruder Model: GS120/38
Main Motor Power: 355kW
Extrusion Capacity: 600-1000kg/h
PE1600
Production Line Type: PE1600
Pipe Diameter Range: Φ1000-1600mm
Extruder Model: GS150/38
Main Motor Power: 500kW
Extrusion Capacity: 600-1500kg/h
PVC Water Supply & Drainage Pipe Extrusion Line
Modelo: PVC63, PVC250, PVC630
Parámetros: Model: PVC63 Double station
Diameter: Φ16~Φ63 mm
Matching Extruder: SJSZ65/132 (Conical Twin Screw Extruder)
Main Motor Power: AC 37 kW
Downstream Power: 24 kW
Hauling Speed: 4~49 m/min
Production Output: 270 kg/h
Raw material: PVC+CaCO₃
Equipped with vacuum calibration, multi-claw traction and dust-free cutting unit
Model: PVC250
Diameter: Φ90~Φ250 mm
Matching Extruder: SJSZ80/156 (Conical Twin Screw Extruder)
Main Motor Power: AC 55 kW
Downstream Power: 24 kW
Hauling Speed: 4~15 m/min
Production Output: 450 kg/h
Raw material: PVC+CaCO₃
Equipped with vacuum calibration, multi-claw traction and dust-free cutting unit
Model: PVC630
Diameter: Φ315~Φ630 mm
Matching Extruder: SJSZ92/188 (Conical Twin Screw Extruder)
Main Motor Power: AC 110 kW
Downstream Power: 39 kW
Hauling Speed: 0~5 m/min
Production Output: 800 kg/h
Raw material: PVC+CaCO₃
Equipped with vacuum calibration, multi-claw traction and dust-free cutting unit
PVC & WPC Foam Board Extrusion Line
Modelo: SJSZ80/156(75kW)、80+165 co-extrusion(75+37kW)
Parámetros: Raw material: PVC+CaCO₃ / WPC composite material
Finished product width:1220mm
Output:400~500kg/h(different by extruder model)
PP Hollow Construction Formwork Extrusion Line
Modelo: SJ-130×33 (160kW)、SJ-90×33 (75kW)
Parámetros: Raw material: PP Recycled Granule (MFI＜3)
Product spec: Width 1220mm, Thickness 15~20mm, round hole hollow structure, ABA three-layer structure
Extruder output: SJ130:500~600kg/h；SJ90:180~250kg/h
Daily output:420~480pcs/24h
Overall machine dimension:34m×7m×4.5m
Power transformer suggestion:315KVA
Power supply:380V/50Hz,3-phase
Double-sided UV anti-aging coating optional; channel smoothness:0.015~0.03μm
PVC Imitation Marble Sheet Extrusion Line
Modelo: SJSZ80/156(75kW), SJSZ92/188(110kW)
Parámetros: Raw material: PVC+CaCO₃ compound
Sheet thickness: 1~12mm
Effective width: 1220mm
Output: 400~700kg/h based on different extruder model
SPC Flooring Extrusion Line
Modelo: SJSZ92/188(110kW)、SJSZ110/220(200kW)、SJP115/30(90kW)、SJP135/30(132kW)
Parámetros: Raw material: PVC+CaCO₃ compound formula
Finished product thickness: 1~10mm
Effective product width: 980mm / 1250mm
Output range: 15~40 tons/24h (varies by extruder model)
Optional craft: EIR in-line synchronous wood grain embossing, vertical/inclined four-roller calender structure
Galería de la empresa
Certificaciones y premios
Casos de éxito
Plastic building materials manufacturer
Stable continuous production, consistent product quality, reliable performance
Complete turnkey solution, on-site installation support, full export documentation provided
SPC flooring manufacturer
Stable continuous production, consistent product quality, low maintenance rate
High-speed production, precise thickness control, on-site installation & training support
Plastic flooring manufacturer
Stable 24/7 production, consistent product quality, low maintenance rate
High output, precise thickness control, reliable after-sales support
Videos de la empresa y productos
Introducción a la empresa y tour por la fábrica
⏱ Duration: 3:45 | 👁 Views: 15,230
Demostración del producto - Kestrel K-1
⏱ Duration: 5:12 | 👁 Views: 28,450
showcase de innovación tecnológica
⏱ Duration: 4:30 | 👁 Views: 12,890
Testimonios de clientes y casos de éxito
⏱ Duration: 6:20 | 👁 Views: 9,650
¿Listo para transformar su vida?
Contáctenos ahora para saber cómo nuestros productos pueden satisfacer sus necesidades.